All Stories

  1. Conversion of Electric Arc Furnace Dust into Ceramics Using Thermodynamic Calculations and Experimental Work
  2. Effect of Electrodeposition Parameters on the Microstructure and Corrosion Behavior of ‎DCPD Coatings on Biodegradable Mg–Ca–Zn Alloy
  3. Experimental investigation of the Mg–Mn–Nd isothermal section at 450°C
  4. Critical assessment and thermodynamic modeling of Mg–Ca–Zn system supported by key experiments
  5. Tensile properties of laser additive manufactured Inconel 718 using filler wire
  6. Experimental Investigation of the Phase Equilibria in the Al-Mn-Zn System at 400°C
  7. On the atomic interdiffusion in Mg–{Ce, Nd, Zn} and Zn–{Ce, Nd} binary systems
  8. In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg–Ca alloys for biomedical applications
  9. Phase Equilibria of the Ce-Mg-Zn Ternary System at 300 °C
  10. Essential Magnesium Alloys Binary Phase Diagrams and Their Thermochemical Data
  11. Thermodynamic and Experimental Study of the Mg-Sn-Ag-In Quaternary System
  12. Progress in Wettability Study of Reactive Systems
  13. Experimental Investigation of the Ce-Mg-Mn Isothermal Section at 723 K (450 °C) via Diffusion Couples Technique
  14. Influence of Cooling Rate on Microsegregation Behavior of Magnesium Alloys
  15. Experimental and thermodynamic study of the Mg–Sn–In–Zn quaternary system
  16. Effect of Casting Parameters on the Microstructural and Mechanical Behavior of Magnesium AZ31-B Alloy Strips Cast on a Single Belt Casting Simulator
  17. Thermodynamic Modeling of Hydrogen Storage Capacity in Mg-Na Alloys
  18. Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V
  19. Phase equilibrium in Mg-Cu-Y
  20. Oxide films in laser additive manufactured Inconel 718
  21. Distortion and residual stress measurements of induction hardened AISI 4340 discs
  22. Experimental investigation and first-principle calculations coupled with thermodynamic modeling of the Mn–Nd phase diagram
  23. Experimental study of the Cu–Ni–Y system at 700 °C using diffusion couples and key alloys
  24. Thermodynamic calculation of the Mg–Mn–Zn and Mg–Mn–Ce systems and re-optimization of their constitutive binaries
  25. Enhancement of amorphous phase formation in alumina–YSZ coatings deposited by suspension plasma spray process
  26. Coherent nanoscale ternary precipitates in crystallized Ca4Mg72Zn24 metallic glass
  27. Processing and Characterization of In Situ (TiC–TiB2)p/AZ91D Magnesium Matrix Composites
  28. Al–Mg–RE (RE=La, Ce, Pr, Nd, Sm) systems: Thermodynamic evaluations and optimizations coupled with key experiments and Miedema’s model estimations
  29. On the prediction of Gibbs free energy of mixing of binary liquid alloys
  30. Synthesizing Nanostructured Ni75Mg16.66Y8.34(at%) Powder by Solid State Reaction and Mechanical Milling
  31. ChemInform Abstract: Experimental Investigation of the Phase Equilibira of the Al—Ca—Zn System at 623 K.
  32. Experimental investigation of the phase equilibria of the Al–Ca–Zn system at 623K
  33. Use of filler wire for laser welding of Ti–6Al–4V
  34. Understanding the reaction mechanism of in-situ synthesized (TiC–TiB2)/AZ91 magnesium matrix composites
  35. Thermal Cycling of Suspension Plasma Sprayed Alumina‐YSZ Coatings Containing Amorphous Phases
  36. Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V
  37. Homogeneity range and crystal structure of the Ca2Mg5Zn13 compound
  38. Critical assessment and thermodynamic modeling of Mg–Zn, Mg–Sn, Sn–Zn and Mg–Sn–Zn systems
  39. A Differential Scanning Calorimetric Study of the Mg-Cu-Y System
  40. Ternary Intermetallic Compounds across the Mg-NiY Line at 673 K
  41. The Ca-Rich Corner of the Al-Ca-Zn System
  42. Fabrication and Reaction Mechanism of In Situ TiC and TiB2 Reinforced Mg Matrix Composites
  43. Morphological and Crystallographic Characterizations of the Ca-Mg-Zn Intermetallics Appearing in Ternary Diffusion Couples
  44. Determination of Global and Local Tensile Behaviours of Laser Welded Ti-6Al-4V Alloy
  45. High‐Temperature Performance of Alumina–Zirconia Composite Coatings Containing Amorphous Phases
  46. Structural considerations in plasma spraying of the alumina–zirconia composite
  47. The effect of cooling rate on thermophysical properties of magnesium alloys
  48. Experimental study of the Ca–Mg–Zn system using diffusion couples and key alloys
  49. Novel fabrication process of AlN ceramic matrix composites at low temperatures
  50. Crashworthiness improvement of a pickup truck's chassis frame using the Pareto-Front and genetic algorithm
  51. Determination of the solubility range and crystal structure of the Mg-rich ternary compound in the Ca–Mg–Zn system
  52. The 400°C isothermal section of the Mg–Al–Ca system
  53. Critical assessment and thermodynamic modeling of the binary Mg–Zn, Ca–Zn and ternary Mg–Ca–Zn systems
  54. A critical thermodynamic assessment of the Mg–Ni, Ni–Y binary and Mg–Ni–Y ternary systems
  55. A thermodynamic description of the Al–Ca–Zn ternary system
  56. Phase equilibria of the constituent ternaries of the Mg-Al-Ca-Sr system
  57. Thermodynamic Description of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems Using the Modified Quasichemical Model for the Liquid Phases
  58. Effective Parameters in Axial Injection Suspension Plasma Spray Process of Alumina-Zirconia Ceramics
  59. Experimental Demonstration of Entrance/Exit Effects on the Permeability Measurements of Porous Materials
  60. The equilibrium phase diagram of the magnesium–copper–yttrium system
  61. Thermodynamic modelling of the Mg–Ca, Mg–Sr, Ca–Sr and Mg–Ca–Sr systems using the modified quasichemical model
  62. Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: Modeling and experimental investigations
  63. Thermodynamic assessment of the phase equilibria in the Al–Ca–Sr system using the modified quasichemical model
  64. Modelling of work-hardening behaviour for laser welded magnesium alloy
  65. Reliability of Laser Welding Process for ZE41A-T5 Magnesium Alloy Sand Castings
  66. An Efficient Crashworthiness Design Optimization Approach for Frontal Automobile Structures
  67. Experimental Investigation of the Mg—Al—Ca System.
  68. Experimental investigation of the MgAlCa system
  69. Experimental study and thermodynamic calculation of Al–Mg–Sr phase equilibria
  70. New Phases in the Mg-Al-Sr System
  71. The effect of microstructure on the permeability of metallic foams
  72. New Phases in the Mg-Al-Sr System
  73. Thermodynamic assessment of the Mg–Zn–Sr system
  74. Microstructural characterization of Mg–Al–Sr alloys
  75. A computational thermodynamic model of the Mg–Al–Ge system
  76. Computational thermodynamic model for the Mg−Al−Y system
  77. Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Nickel Superalloys
  78. Mathematical Modeling and Experimental Investigations of Isothermal Solidification during Transient Liquid Phase Bonding of Nickel Superalloys
  79. High temperature neutron diffraction study of the Al2O3–Y2O3 system
  80. Thermodynamic modeling of the Ca–Ni system
  81. The phase equilibria in the Mg–Ni–Ca system
  82. Experimental Study of the Ternary Magnesium—Aluminum—Strontium System.
  83. Experimental study of the ternary magnesium–aluminium–strontium system
  84. Understanding AlN sintering through computational thermodynamics combined with experimental investigation
  85. Thermodynamic modeling of the Mg–Al–Sb system
  86. THERMODYNAMIC MODELLING OF THE Mg-Al-Ca SYSTEM
  87. High‐Temperature Neutron Diffraction of the AlN–Al2O3–Y2O3 System