All Stories

  1. Mechanism of stimulated Mie scattering: Light-induced redistribution of self-assembled nanospheres of two-photon absorbing chromophore
  2. Azobenzene-functionalized polyimides as wireless actuators
  3. Synthesis and characterization of high nitrile content polyimides as dielectric films for electrical energy storage
  4. Photopiezoelectric Composites of Azobenzene‐Functionalized Polyimides and Polyvinylidene Fluoride
  5. Synthesis of dual NIR two-photon absorptive [60]fullerenyl multiadducts for nonlinear light-transmittance reduction application
  6. Molecular Engineering of Azobenzene-Functionalized Polyimides To Enhance Both Photomechanical Work and Motion
  7. Symmetry- and Solvent-Dependent Photophysics of Fluorenes Containing Donor and Acceptor Groups
  8. Designing light responsive bistable arches for rapid, remotely triggered actuation
  9. Impact of Backbone Rigidity on the Photomechanical Response of Glassy, Azobenzene-Functionalized Polyimides
  10. Enhancing electrical energy storage using polar polyimides with nitrile groups directly attached to the main chain
  11. Germanium on silicon to enable integrated photonic circuits
  12. Synthesis and characterization of unsymmetrical benzonitrile‐containing polyimides: Viscosity‐lowering effect and dielectric properties
  13. Nanodiamond/Polyimide High Temperature Dielectric Films for Energy Storage Applications
  14. Synthesis of Photoresponsive Dual NIR Two-Photon Absorptive [60]Fullerene Triads and Tetrads
  15. Linear and Nonlinear Optical Properties of Photoresponsive [60]Fullerene Hybrid Triads and Tetrads with Dual NIR Two-Photon Absorption Characteristics
  16. Macromol. Chem. Phys. 11/2013
  17. Exciplex Formation in Blended Spin-Cast Films of Fluorene-Linked Dyes and Bisphthalimide Quenchers
  18. Off-Resonant Two-Photon Absorption Cross-Section Enhancement of an Organic Chromophore on Gold Nanorods
  19. Polymer design for high temperature shape memory: Low crosslink density polyimides
  20. Flexural‐Torsional Photomechanical Responses in Azobenzene‐Containing Crosslinked Polyimides
  21. Exciplex formation in solid state blends of charge-transfer type AFX dyes and bisimide compounds
  22. Photomechanical Response of Pre‐strained Azobenzene‐Functionalized Polyimide Materials
  23. Tailoring the Photomechanical Response of Glassy, Azobenzene-Functionalized Polyimides by Physical Aging
  24. Plasmonic Enhancement of the Two Photon Absorption Cross Section of an Organic Chromophore Using Polyelectrolyte-Coated Gold Nanorods
  25. Enhancement of Photogenerated Mechanical Force in Azobenzene‐Functionalized Polyimides
  26. Enhancement of Photogenerated Mechanical Force in Azobenzene‐Functionalized Polyimides
  27. Magnetocurrent of Charge-Polarizable C60-Diphenylaminofluorene Monoadduct-Derived Magnetic Nanocomposites
  28. Immobilization of platinum nanoparticles on 3,4-diaminobenzoyl-functionalized multi-walled carbon nanotube and its electrocatalytic activity
  29. Enhancing the fraction of grafted polystyrene on silica hybrid nanoparticles
  30. Large Femtosecond Two-Photon Absorption Cross Sections of Fullerosome Vesicle Nanostructures Derived from a Highly Photoresponsive Amphiphilic C60-Light-Harvesting Fluorene Dyad
  31. Aromatic Polyimides Containing Main-Chain Diphenylaminofluorene–Benzothiazole Motif: Fluorescence Quenching, Two-Photon Properties, and Exciplex Formation in a Solid State
  32. Unique Ultralow 18π-Trannulenyl HOMO–LUMO Energy Gap of Photostable Emerald-Green D3d-2-Methylmalonato[60]fullerenes
  33. Photomechanical Response of Glassy Azobenzene Polyimide Networks
  34. Nanocomposite prepared from in situ grafting of polypyrrole to aminobenzoyl-functionalized multiwalled carbon nanotube and its electrochemical properties
  35. Preparation and Electrocatalytic Activity of Gold Nanoparticles Immobilized on the Surface of 4-Mercaptobenzoyl-Functionalized Multiwalled Carbon Nanotubes
  36. Electrothermal Polymer Nanocomposite Actuators
  37. Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: Functionalization, preparation and characterization
  38. Grafting of polyaniline onto the surface of 4‐aminobenzoyl‐functionalized multiwalled carbon nanotube and its electrochemical properties
  39. Dielectric characteristics of polyimide CP2
  40. Synthesis and electrical properties of polyaniline/polyaniline grafted multiwalled carbon nanotube mixture via in situ static interfacial polymerization
  41. Multifunctional poly(2,5‐benzimidazole)/carbon nanotube composite films
  42. Synthesis and characterization of highly photoresponsive fullerenyl dyads with a close chromophore antenna–C60 contact and effective photodynamic potential
  43. Synthesis of Highly Luminescent Tris-Fluorenyl Chromophores as Intermediates of Potential Nonlinear Photonic Materials
  44. In-situ synthesis and thermal-electrical properties of CP2- polyimide/pristine and amine-functionalized carbon nanofiber composites
  45. Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)
  46. Grafting of 4-(2,4,6-Trimethylphenoxy)benzoyl onto Single-Walled Carbon Nanotubes in Poly(phosphoric acid) via Amide Function
  47. Direct Three-Dimensional Microfabrication of Hydrogels via Two-Photon Lithography in Aqueous Solution
  48. Carboxylic Acid-Terminated Hyperbranched Polybenzoxazole and Its Polyarm-Star Block Copolymers
  49. Synthesis and Characterization of Poly(2,5-benzimidazole) (ABPBI) Grafted Carbon Nanotubes
  50. Macromolecular dumbbells: synthesis and photophysical properties of hyperbranched poly(etherketone)-b-polybenzobisthiazole-b-hyperbranched poly(etherketone) ABA triblock copolymers
  51. In-Situ Nanocomposite Synthesis: Arylcarbonylation and Grafting of Primary Diamond Nanoparticles with a Poly(ether−ketone) in Polyphosphoric Acid
  52. One-pot purification and functionalization of single-walled carbon nanotubes in less-corrosive poly(phosphoric acid)
  53. Functionalization of multi-walled carbon nanotubes with various 4-substituted benzoic acids in mild polyphosphoric acid/phosphorous pentoxide
  54. Thermal−Electrical Character of in Situ Synthesized Polyimide-Grafted Carbon Nanofiber Composites
  55. Epoxy/amine‐functionalized short‐length vapor‐grown carbon nanofiber composites
  56. Semimetallic Transport in Nanocomposites Derived from Grafting of Linear and Hyperbranched Poly(phenylene sulfide)s onto the Surface of Functionalized Multi-Walled Carbon Nanotubes
  57. Synthesis and Characterization of C60Dyads with Highly Photoactive Dicyanoethylenylated Diphenylaminofluorene Chromophore Antenna
  58. Synthesis, Characterization, Two‐Photon Absorption, and Optical Limiting Properties of Ladder‐Type Oligo‐p‐phenylene‐Cored Chromophores
  59. Nylon 610/functionalized multiwalled carbon nanotube composite prepared from in‐situ interfacial polymerization
  60. Branched poly(arylene ether ketone)s with tailored thermal properties: Effects of AB/AB2 ratio, core (B3) percentage, and reaction temperature
  61. Nonlinear Optical Transmission Properties of C60 Dyads Consisting of a Light-Harvesting Diphenylaminofluorene Antenna
  62. Regioselective Chemical Modification of Fullerene by Destructive Electrophilic Reaction in Polyphosphoric Acid/Phosphorus Pentoxide
  63. Poly(2,5-benzoxazole)/carbon nanotube composites via in situ polymerization of 3-amino-4-hydroxybenzoic acid hydrochloride in a mild poly(phosphoric acid)
  64. ChemInform Abstract: Multiphoton Absorbing Materials: Molecular Designs, Characterizations, and Applications
  65. Nanocomposites derived from in situ grafting of linear and hyperbranched poly(ether‐ketone)s containing flexible oxyethylene spacers onto the surface of multiwalled carbon nanotubes
  66. Multiphoton Absorbing Materials:  Molecular Designs, Characterizations, and Applications
  67. Synthesis and Properties of Polyetherketone-block-Polybenzobisthiazole-block-Polyetherketone ABA Triblock Copolymers
  68. Solubilization of Carbon Nanofibers with a Covalently Attached Hyperbranched Poly(ether ketone)
  69. Large-scale self-assembly of dispersed nanodiamonds
  70. Alternative Approach to an AB2 Monomer for Hyperbranched Poly(Arylene Ether Ketone Imide)s
  71. Synthesis of linear and hyperbranched poly(etherketone)s containing flexible oxyethylene spacers
  72. Starburst Encapsulation of C60by Multiple Hindered Two‐Photon Absorptive Diphenylaminodialkylfluorene Arms
  73. Nanocomposites Derived from a Low-Color Aromatic Polyimide (CP2) and Amine-Functionalized Vapor-Grown Carbon Nanofibers:  In Situ Polymerization and Characterization
  74. In situ grafting of carboxylic acid-terminated hyperbranched poly(ether-ketone) to the surface of carbon nanotubes
  75. In-Situ Grafting of Hyperbranched Poly(ether ketone)s onto Multiwalled Carbon Nanotubes via the A3 + B2 Approach
  76. Insight into the Nonlinear Absorbance of Two Related Series of Two-Photon Absorbing Chromophores
  77. Simplified tube form factor for analysis of small-angle scattering data from carbon nanotube filled systems
  78. Large concentration-dependent nonlinear optical responses of starburst diphenylaminofluorenocarbonyl methano[60]fullerene pentads
  79. Single- and Two-Photon Properties of a Dye-Derivatized Roussin's Red Salt Ester (Fe2(μ-RS)2(NO)4) with a Large TPA Cross Section
  80. Self-Controlled Synthesis of Hyperbranched Poly(ether ketone)s from A3 + B2 Approach via Different Solubilities of Monomers in the Reaction Medium
  81. Effects of Conjugation in Length and Dimension on Spectroscopic Properties of Fluorene-Based Chromophores from Experiment and Theory
  82. Synthesis and Chain-End Modification of a Novel Hyperbranched Polymer Containing Alternating Quinoxaline and Benzoxazole Repeat Units
  83. Development of novel two-photon absorbing chromophores
  84. Large Cross-Section Enhancement and Intramolecular Energy Transfer upon Multiphoton Absorption of Hindered Diphenylaminofluorene-C60 Dyads and Triads
  85. Light-Harvesting Chromophores with Metalated Porphyrin Cores for Tuned Photosensitization of Singlet Oxygen via Two-Photon Excited FRET
  86. Grafting of vapor-grown carbon nanofibers (VGCNF) with a hyperbranched poly(ether-ketone)
  87. Modification of bisphenol-A based bismaleimide resin (BPA-BMI) with an allyl-terminated hyperbranched polyimide (AT-PAEKI)
  88. Hyperbranched Poly(phenylquinoxaline−ether−ketone) Synthesis in Poly(phosphoric acid)/P2O5 Medium:  Optimization and Some Interesting Observations
  89. Multiwalled carbon nanotubes and nanofibers grafted with polyetherketones in mild and viscous polymeric acid
  90. Thermally reactive phenylethynyl-terminated bis(benzylester) and bis(amide) monomers based on semi-enzymatically produced 6-phenylethynyl picolinic acid
  91. Synthesis and characterization of photoresponsive diphenylaminofluorene chromophore adducts of [60]fullerene
  92. Conversion of 2-(4-carboxyphenyl)-6-nitrobenzothiazole to 4-(6-amino-5-hydroxybenzothiazol-2-yl)benzoic acid by a recombinant E. coli strain
  93. Geometrical influence of ABn monomer structure on the thermal properties of linear-hyperbranched ether–ketone copolymers prepared via an AB+ABn route
  94. Background host effects on the nonlinear photophysical properties of a two-photon absorbing dye
  95. In Situ Synthesis of Poly(ethylene terephthalate) (PET) in Ethylene Glycol Containing Terephthalic Acid and Functionalized Multiwalled Carbon Nanotubes (MWNTs) as an Approach to MWNT/PET Nanocomposites
  96. Synthesis of C60-diphenylaminofluorene dyads with two-photon absorbing characteristics
  97. Unusual thermal relaxation of viscosity-and-shear-induced strain in poly(ether-ketones) synthesized in highly viscous polyphosphoric acid/P2O5 medium
  98. Synthesis and Photophysical Properties of C60‐Diphenylaminofluorene Dyad and Multiads
  99. Grafting of Vapor-Grown Carbon Nanofibers via in-Situ Polycondensation of 3-Phenoxybenzoic Acid in Poly(phosphoric acid)
  100. Understanding the One-Photon Photophysical Properties of a Two-Photon Absorbing Chromophore
  101. Fluorescence Resonance Energy Transfer in Novel Multiphoton Absorbing Dendritic Structures
  102. Singlet Oxygen Generation via Two-Photon Excited FRET
  103. Degenerate two-photon-absorption spectral studies of highly two-photon active organic chromophores
  104. Covalent modification of vapour-grown carbon nanofibers via direct Friedel–Crafts acylation in polyphosphoric acid
  105. Degenerate nonlinear absorption and optical power limiting properties of asymmetrically substituted stilbenoid chromophoresElectronic supplementary information (ESI) available: Experimental details. See http://www.rsc.org/suppdata/jm/b3/b313185h/
  106. Toward Highly Active Two-Photon Absorbing Liquids. Synthesis and Characterization of 1,3,5-Triazine-Based Octupolar Molecules
  107. Improved syntheses of poly(oxy-1,3-phenylenecarbonyl-1,4-phenylene) and related poly(ether–ketones) using polyphosphoric acid/P2O5 as polymerization medium
  108. Linear-hyperbranched copolymerization as a tool to modulate thermal properties and crystallinity of a para-poly(ether-ketone)
  109. Room-Temperature Free-Radical-Induced Polymerization of 1,1‘-(Methylenedi-1,4-phenylene)bismaleimide via a Novel Diphenylquinoxaline-Containing Hyperbranched Aromatic Polyamide
  110. Functionalization of heterocyclic diphenylamino-based two-photon absorbing materials for microfabrication, data storage, and upconverted imaging
  111. Thermal Stability of Quaternary Phosphonium Modified Montmorillonites
  112. Study of Two-Photon Absorption Spectral Property of a Novel Nonlinear Optical Chromophore Using Femtosecond Continuum
  113. Synthesis of C60-diphenylaminofluorene dyad with large 2PA cross-sections and efficient intramolecular two-photon energy transfer
  114. New technique for degenerate two-photon absorption spectral measurements using femtosecond continuum generation
  115. Phase‐separated, conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer
  116. Synthesis, emission and spectro-electrochemical studies of bithienylnaphthalene systems
  117. Diphenylaminofluorene-Based Two-Photon-Absorbing Chromophores with Various π-Electron Acceptors
  118. Poly(2,5-dihydroxy-1,4-phenylene benzobisthiazole)/poly(1,4-phenylene benzobisthiazole) copolymers: Chain packing and properties
  119. Thermotropic Liquid Crystalline Behavior of Dihydroxyphenylene Benzobisthiazole Derivatives
  120. New Wholly-Aromatic Thermotropic Polyesters with Controlled Flexibility
  121. Enhanced electrical properties of rigid-rod polymer incorporated with electroactive triarylamino moieties
  122. New aromatic benzazole polymers, 3. Synthesis of rigid-rod benzobisazole polymers with main-chain 2,2'-bipyridine-5,5'-diyl units
  123. New aromatic benzazole polymers, 3. Synthesis of rigid-rod benzobisazole polymers with main-chain 2,2'-bipyridine-5,5'-diyl units
  124. Synthesis and thermal properties of thermosetting bis‐benzocyclobutene–terminated arylene ether monomers
  125. Synthesis and thermal properties of thermosetting bis-benzocyclobutene-terminated arylene ether monomers
  126. New aromatic benzazole polymers II: Synthesis and conductivity of benzobisthiazole-co-polymers incorporated with 4-N,N-dimethylaminotriphenylamine groups
  127. New aromatic benzazole polymers. I. Benzobisthiazole and benzobisoxazole polymers with main-chain triarylamino units
  128. Aromatic polyamides containing keto-benzocyclobutene pendants
  129. Aromatic polyamides containing keto‐benzocyclobutene pendants
  130. Pseudo-ladder rigid-rod polymers: dihydroxy pendent benzothiazole aromatic heterocyclic polymer and copolymers
  131. Aromatic-Heterocyclic Polymers Research at United States Air Force Wright Laboratory: Recent Developments
  132. Rigid-rod molecular composites via ionic interactions
  133. Synthesis and characterization of aromatic polyisoimides derived from PMDA and para-diamines. An approach to in situ generated rigid-rod molecular composites
  134. Bisbenzocyclobutene: A thermoset matrix host for rigid‐rod molecular composites
  135. Benzocyclobutene in polymer synthesis. III. Heat‐resistant thermosets based on Diels–Alder polymerization of a bisbenzocyclobutene and a bismaleimide
  136. Benzocyclobutene in polymer synthesis. I. Homopolymerization of bisbenzocyclobutene aromatic imides to form high‐temperature resistant thermosetting resins
  137. Benzocyclobutene in Polymer Synthesis
  138. Solid-State Nmr Studies of Molecular Composites and Thermally Cured Copolymers
  139. Benzocyclobutene in polymer synthesis. II. Solid state diels–alder polymerization utilizing an in situ generated diene and an alkyne
  140. New nitrene complexes of niobium and tantalum of the type M(NR)(S2CNR'2)3
  141. Crystal and molecular structures of tert-butyltetrakis(dimethylamido)tantalum(V), bromo(p-tolyl)tris(dimethylamido)tantalum(V), and [(trimethylsilyl)methyl]tetrakis(N,N-dimethylcarbamato)tantalum(V). Evidence for stabilization of .sigma.-alkyl ligands ...
  142. Chloro(dimethylamido) compounds of tantalum(V): Preparations, properties, and structures of [Ta(NMe2)3Cl2]2, TaCl3(NMe2)2(HNMe2), Ta(NMe2)3Cl2(HNMe2), and [TaCl2(NMe2)2(HNMe2)]2O