All Stories

  1. Influence of Prior Deformation on the Sensitization Kinetics of Nitrogen Alloyed 316L Stainless Steels
  2. Corrosion Fatigue Behavior of 316LN SS in Acidified Sodium Chloride Solution at Applied Potential
  3. Effect of Nitrogen on Stress Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique
  4. Electrochemical techniques for estimating the degree of sensitization in austenitic stainless steels
  5. Mechanical properties and corrosion behaviour of nanocrystalline Ti–5Ta–1.8Nb alloy produced by cryo-rolling
  6. Surface modification of type 304 stainless steel with duplex coatings for corrosion resistance in sea water environments
  7. ExtremophilicBacillus cereusMVK04 Isolated from Thorium Ore Sample Possesses Self-Assembled Surface Layer Protein on Cell Wall to Resist Extreme Environments
  8. Detection and analysis of microbiologically influenced corrosion of 316 L stainless steel with electrochemical noise technique
  9. Synthesis and Characterization of Nanostructured Platinum Coated Titanium as Electrode Material
  10. Electrochemical Noise Analysis of Pitting Corrosion of Type 304L Stainless Steel
  11. Influence of silanes on the wettability of anodized titanium
  12. Evolution of surface chemistry and morphology of oxide scale formed during initial stage oxidation of modified 9Cr–1Mo steel
  13. Effect of Addition of Boron and Nitrogen on the Corrosion Resistance of Modified 9Cr-1Mo Ferritic Steel
  14. Electrochemical noise resistance evaluation of 304L SS in nitric acid and simulated nuclear high level waste
  15. Thermal oxidation of titanium to improve corrosion resistance in boiling nitric acid medium
  16. Refractory metal coatings on titanium to improve corrosion resistance in nitric acid medium
  17. Enhancement of intergranular corrosion resistance of type 304 stainless steel through a novel surface thermo-mechanical treatment
  18. Enhancement of corrosion resistance of nickel based superalloys by laser surface melting
  19. Enhancement of Corrosion Performance of Titanium by Micro-Nano Texturing
  20. Surface modification of plasma sprayed Al2O3–40wt% TiO2 coatings by pulsed Nd:YAG laser melting
  21. Surface Characterization of Metal Waste Form Alloys for Geological Disposal After Dynamic and Static Leachability Tests
  22. Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation
  23. Characterisation of pyrolytic graphite exposed to molten LiCl–KCl salt
  24. Modeling of Hydrodynamics in a 25 mm ϕ Pulsed Disk and Doughnut Column
  25. Corrosion of Nickel-Containing Alloys in Molten LiCl-KCl Medium
  26. Extraction Studies of Phosphoric Acid Tributyl Ester from Nitric Acid Solutions Using Dodecane in the Presence of Inextractable Metal Nitrates
  27. Axial mixing in annular centrifugal extractors
  28. Effect of Nitrogen and Sensitization on the Microstructure and Pitting Corrosion Behavior of AISI Type 316LN Stainless Steels
  29. Corrosion Behavior of Alloy 600 in Simulated Nuclear High Level Waste Medium
  30. Measurement of drop size characteristics in annular centrifugal extractors using phase Doppler particle analyzer (PDPA)
  31. Enhancement of Corrosion Resistance of Type 304 Stainless Steel Through a Novel Thermo-mechanical Surface Treatment
  32. Microstructural characterization of plasma sprayed Al2O3-40wt.% TiO2 coatings on high density graphite with different post-treatments
  33. Inhibition of manganese oxidising bacterial adhesion on pretreated stainless steel surfaces
  34. Preparation and characterization of biocompatible carbon electrodes
  35. New Data on Activity Coefficients of Potassium, Nitrate, and Chloride Ions in Aqueous Solutions of KNO3 and KCl by Ion Selective Electrodes
  36. Thermal Decomposition of Nitrated Tri-n-Butyl Phosphate in a Flow Reactor
  37. CFD and experimental studies of single phase axial dispersion coefficient in pulsed sieve plate column
  38. Degradation in Thermal Properties and Morphology of Polyetheretherketone-Alumina Composites Exposed to Gamma Radiation
  39. Equilibrium Study for the System Tri- n -butyl Phosphate, Normal Paraffin Hydrocarbon, and Nitric Acid
  40. Corrosion behavior of Zr-based metallic glass coating on type 304L stainless steel by pulsed laser deposition method
  41. Corrosion issues related to disposal of 316 SS–zirconium metal waste form under simulated repository conditions
  42. Morphological and compositional analysis of passive film on austenitic stainless steel in nitric acid medium
  43. Electrochemical and surface investigation of zirconium based metallic glass Zr59Ti3Cu20Al10Ni8 alloy in nitric acid and sodium chloride media
  44. Characterization of nitride coatings on high density graphite deposited by magnetron sputtering
  45. Corrosion performance of TiO2 coated type 304L stainless steel in nitric acid medium
  46. In situ surface investigation of austenitic stainless steel in nitric acid medium using electrochemical atomic force microscopy
  47. ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY AND ITS APPLICATIONS IN CORROSION RESEARCH
  48. Electrochemical and surface studies on zircaloy-4 exposed to concentrated nitric acid medium
  49. Dissimilar Joining of Zircaloy-4 to Type 304L Stainless Steel by Friction Welding Process
  50. Effect of Heat Input on Microstructural Changes and Corrosion Behavior of Commercially Pure Titanium Welds in Nitric Acid Medium
  51. Failure analysis of pin prick defects in galvannealed sheet – A case study
  52. Pitting and Intergranular Corrosion Resistance of AISI Type 301LN Stainless Steels
  53. Laser surface modification of plasma sprayed yttria stabilised zirconia coatings on type 316L stainless steel
  54. Corrosion assessment of nitric acid grade austenitic stainless steels
  55. Corrosion of type 316L stainless steel in molten LiCl-KCl salt
  56. Platinum-modified titanium anodes for the electrolytic destruction of nitric acid
  57. Electrophoretic deposition of TiO2and TiO2+ CeO2coatings on type 304L stainless steel
  58. Laser processed Cr–SiC coatings on AISI type 316L stainless steel
  59. Influence of laser surface alloying with chromium and nickel on corrosion resistance of type 304L stainless steel
  60. Effect of surface modified layers on fretting fatigue damage of biomedical titanium alloys
  61. Intergranular corrosion damage evaluation through laser scattering technique
  62. Determination of corrosion types for AISI type 304L stainless steel using electrochemical noise method
  63. Characterization of oxide layers on amorphous Zr-based alloys by Auger electron spectroscopy with sputter depth profiling
  64. Electrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications
  65. ELECTROCHEMICAL NOISE TECHNIQUE FOR CORROSION ASSESSMENT - A REVIEW
  66. Laser cladding of Si on austenitic stainless steel
  67. Surface Alloying of Nitrogen to Improve Corrosion Resistance of Steels and Stainless Steels
  68. Pitting Corrosion of Bulk Glass-Forming Zirconium-Based Alloys.
  69. Laser Processed Metal–Ceramic Coatings on Aisi Type 316l Stainless Steel
  70. Corrosion Behaviour of Nitrogen Bearing Austenitic Stainless Steel Surface Diffusion Alloyed with Ti/Al Precoated Films
  71. Microstructural and Corrosion Evaluation of Laser Surface Nitrided Ti-13Nb-13Zr Alloy
  72. Corrosion Properties of Surface Modified Ti-6Al-7Nb Alloy Under Pulsed Plasma Nitriding and Nitrogen Ion Implantation Conditions
  73. Corrosion assessment of type 304L stainless steel in nitric acid
  74. Surface modification and engineering for nuclear industry
  75. Surface characterization of passive film formed on nitrogen ion implanted Ti–6Al–4V and Ti–6Al–7Nb alloys using SIMS
  76. Failures of Stainless Steel Orthopedic Devices - Causes and Remedies
  77. Corrosion and Microstructural Aspects of Titanium and its Alloys as Orthopaedic Devices
  78. Anodic and Cathodic Protection
  79. Pitting induced failure of austenitic cryogenic condenser coil for acetone service
  80. Electrochemical Reactivity of Zirconium-Based Bulk Metallic Glasses
  81. Electrophoretic Deposition of Hydroxyapatite Coatings and Corrosion Aspects of Metallic Implants
  82. Uniform Corrosion of Austenitic Stainless Steels
  83. Surface Modification for Corrosion Protection of Austenitic Stainless Steels
  84. Effect of Nitrogen Ion Implantation on the Localized Corrosion Behavior of Titanium Modified Type 316L Stainless Steel in Simulated Body Fluid
  85. Laser surface melting for improving intergranular corrosion resistance of cold‐worked and sensitised type 316 stainless steel
  86. Effects of Laser Surface Melting on the Pitting Resistance of Sensitized Nitrogen-Bearing Type 316L Stainless Steel
  87. Surface Characterization of Electrochemically Formed Passive Film on Nitrogen Ion Implanted Ti6Al4V Alloy
  88. Corrosion Behavior of Weldments of Ti and Ti- 5Ta for Nuclear Fuel Reprocessing Plants
  89. Dissolution, Passivation and Composition of Passive Films of Binary Iron-Nitrogen Alloy
  90. DESENSITISATION OF AUSTENITIC STAINLESS STEELS USING lASER SURFACE MELTING
  91. In vitro electrochemical investigations of advanced stainless steels for applications as orthopaedic implants
  92. Investigation of fatigue failure of a stainless steel orthopedic implant device
  93. Localized corrosion studies on materials proposed for a safety-grade sodium-to- air decay-heat removal system for fast breeder reactors
  94. Pitting corrosion resistance of laser surface alloyed 304 stainless steel
  95. Pitting corrosion resistance of laser surface alloyed 304 stainless steel
  96. Intergranular corrosion resistance of microstructure- modified type 316 austenitic stainless steel
  97. Localized Corrosion Studies on Laser Surface Melted Type 316 Austenitic Stainless Steel
  98. Intergranular corrosion studies on warm worked type 316 austenitic stainless steel