All Stories

  1. Brain-inspired computing in a brain-inspired medium
  2. Surface-dominant micro/nanofluidics for efficient green energy conversion
  3. Uniform formation and characterization of Au/TiO2 nanoparticles for electrokinetically assisted optofluidic reactors
  4. Multi-Layered Bipolar Ionic Diode Working in Broad Range Ion Concentration
  5. Multi-Layered Bipolar Ionic Diode Working in Broad Range Ion Concentration
  6. Analyses of Pore-Size-Dependent Ionic Transport in Nanopores in the Presence of Concentration and Temperature Gradients
  7. Safe, Durable, and Sustainable Self-Powered Smart Contact Lenses
  8. Asymmetric Nanochannel Network-Based Bipolar Ionic Diode for Enhanced Heavy Metal Ion Detection
  9. Ion-concentration-polarization-assisted photocatalytic reactor for highly efficient water purification
  10. Combined Effects of Zeta-potential and Temperature of Nanopores on Diffusioosmotic Ion Transport
  11. Performance Maximization of Bipolar Ionic Diodes Through Geometry Optimization of Multi-Layered Microchannel and Its Appplications
  12. Sustainable and high-power wearable glucose biofuel cell using long-term and high-speed flow in sportswear fabrics
  13. Autonomous Energy Harvester Based on Textile-Based Enzymatic Biofuel Cell for On-Demand Usage
  14. Multimodal and Covert–Overt Convertible Structural Coloration Transformed by Mechanical Stress
  15. Magnetic micropump embedded in contact lens for on-demand drug delivery
  16. Comprehensive Analysis and Control of Diffusioosmosis-Driven Ionic Transport Through Interconnected Nanoporous Membranes
  17. Photonic crystal-based smart contact lens for continuous intraocular pressure monitoring
  18. Colloidal crystal-PDMS composite VOCs sensor with modified initial interparticle distance
  19. Wearable Textile-Based Glucose Fuel Cell Using Mositure Management Fabrics for Improved & Long-Term Power Generation
  20. Electrical Characterization of Textile-Based Enzymatic Biofuel Cell for Energy Harvesting Interface Circuit
  21. Dynamic Culture and Selective Extraction of Target Microbial Cells in Self-Assembled Particle Membrane-Integrated Microfluidic Bioreactor Array
  22. A hydrogel-driven microfluidic suction pump with a high flow rate
  23. Ultra-Thin Magnetic Micropump for On-Demand Drug Delivery
  24. Fabrication of Spheroids with Uniform Size by Self-Assembly of a Micro-Scaled Cell Sheet (μCS): The Effect of Cell Contraction on Spheroid Formation
  25. Nanochannel-Confined TAMRA-Polypyrrole Stained DNA Stretching by Varying the Ionic Strength from Micromolar to Millimolar Concentrations
  26. Characterization of 3D electrospinning on inkjet printed conductive pattern on paper
  27. Flexible All‐Solid‐State Electrically Tunable Photonic Crystals
  28. Intravitreal implantable magnetic micropump for on-demand VEGFR-targeted drug delivery
  29. Engineering spheroids potentiating cell-cell and cell-ECM interactions by self-assembly of stem cell microlayer
  30. Characterization of in situ sintering of silver nanoparticles on commercial photo papers in inkjet printing
  31. Ultra-fast responsive colloidal–polymer composite-based volatile organic compounds (VOC) sensor using nanoscale easy tear process
  32. Enhancement of radionuclide bio-decontamination by screening highly efficient microalgae for Sr biomineralization
  33. High-voltage nanofluidic energy generator based on ion-concentration-gradients mimicking electric eels
  34. User-friendly point-of-care detection of influenza A (H1N1) virus using light guide in three-dimensional photonic crystal
  35. Microcontact printing of polydopamine on thermally expandable hydrogels for controlled cell adhesion and delivery of geometrically defined microtissues
  36. Micro check valve integrated magnetically actuated micropump for implantable drug delivery
  37. Nanoscale easy tear process for ultra-fast responsive colloidal crystal-PDMS composite VOCs sensors
  38. Permanent encapsulation of nanoparticle patterns formed by inkjet printer for transparent and flexible anti-counterfeit applications
  39. Reverese electrodialysis based nanofluidic power generator with multiple cells
  40. Facile fabrication of tissue-engineered constructs using nanopatterned cell sheets and magnetic levitation
  41. In vitro quantitative analysis of Salmonella typhimurium preference for amino acids secreted by human breast tumor
  42. High Current Ionic Diode Using Homogeneously Charged Asymmetric Nanochannel Network Membrane
  43. Photonic-Crystal-Based Thin Film Sensor for Detecting Volatile Organic Compounds
  44. Characterization of polymer electrolyte membranes for application in glucose fuel cells
  45. Highly sensitive user friendly thrombin detection using emission light guidance from quantum dots-aptamer beacons in 3-dimensional photonic crystal
  46. Direct label-free detection of Rotavirus using a hydrogel based nanoporous photonic crystal
  47. Effect of ion current rectification on energy harvesting by reverse electrodialysis
  48. Investigation of various fluorescent protein–DNA binding peptides for effectively visualizing large DNA molecules
  49. Paper-based energy harvesting from salinity gradients
  50. Self-assembled particle membranes for in situ concentration and chemostat-like cultivation of microorganisms on a chip
  51. Characterization of polymer electrolyte membranes for application of glucose biofuel cell
  52. Enhancement of radioactive decontamination in microalgae using dielectrophoresis based screening
  53. Non-equilibrium electrokinetic micro/nano fluidic mixer with spatially controlled self-assembled nanoparticle networks
  54. Paper based reverse electrodialysis power generator
  55. Tunable reverse electrodialysis microplatform with geometrically controlled self-assembled nanoparticle network
  56. An electrokinetic study on tunable 3D nanochannel networks constructed by spatially controlled nanoparticle assembly
  57. Non-equilibrium electrokinetic micromixer with 3D nanochannel networks
  58. Ion transportation control in nanofluidics through geometrically controlled nanoparticle assembly
  59. 3D photonic crystal-based biosensor functionalized with quantum dot-based aptamer for thrombine detection
  60. Energy Harvesting from Reverse Electrodialysis in Ion-Selective Membrane Formed with Self-Assembled Nanoparticles
  61. Cardiomyocyte contractile force changes in response to chemical environments
  62. Cardiomyocyte sensor responsive to changes in physical and chemical environments
  63. Nanofluidic reverse electrodialysis platform using controlled assembly of nanoparticles for high power energy generation
  64. Slope and cantilever type electrode fabrication for measurement of neurospheroid signal
  65. Nanoscale electrokinetics in self-assembled nanoparticles
  66. Quantitative analysis of bacterial preference for cancer secreting proteins
  67. Characterization of depletion layer formation using self-assembled nanoparticles in microchannels
  68. Label-free specific detection of immunoglobulin G antibody using nanoporous hydrogel photonic crystals
  69. Preparation of Biomimetic Hydrogels with Controlled Cell Adhesive Properties and Topographical Features for the Study of Muscle Cell Adhesion and Proliferation
  70. Transfer Printing of Cell Layers with an Anisotropic Extracellular Matrix Assembly using Cell‐Interactive and Thermosensitive Hydrogels
  71. Evaluation of the biocompatibility of a coating material for an implantable bladder volume sensor
  72. Quantitatively controlled in situ formation of hydrogel membranes in microchannels for generation of stable chemical gradients
  73. Concentration gradient generation of multiple chemicals using spatially controlled self-assembly of particles in microchannels
  74. In-situ self-assembled colloidal crystals within microchannels using one step stamping for direct seawater desalination by ion concentration polarization
  75. Highly sensitive protein detection using quenching effects from aptamer-functionalized photonic crystals
  76. Formation of hydrogel membranes in microchannels and its applications
  77. Microfluidic mixing using periodically induced secondary potential in electroosmotic flow
  78. Measurement and analysis of micro-scale adhesion for efficient transfer printing
  79. In-situ closed loop hydrogel membrane formation by one step stamping
  80. Specific and label-free immunoglobulin G antibody detection using nano porous hydrogel photonic crystals
  81. Controllable in-situ hydrogels membrane formation using microfluidics
  82. Polymer microcantilever arrays for high-throughput separation using a combination of dielectrophoresis and sedimentations
  83. Topological design of electrode shapes for dielectrophoresis based devices
  84. Measurement of Single-Cell Deformability Using Impedance Analysis on Microfluidic Chip
  85. MEMS-based power generation system using contractile force generated by self-organized cardiomyocytes
  86. Humidity sensors mimicking cuticle of Hercules beetles
  87. Biologically inspired humidity sensor based on three-dimensional photonic crystals
  88. Use of Piezoelectric Effect in Portable Loadless Wind-Power Source for Ubiquitous Sensor Networks
  89. Design and analysis of portable loadless wind power source for ubiquitous sensor network
  90. Simple haptotactic gradient generation within a triangular microfluidic channel
  91. MEMS power generation using activation of cardiomyocytes on a PMN-PT diaphragm
  92. Surface Measurement of Microstructures Using Optical Pick-up Based Scanner
  93. High-throughput microparticle separation using gradient traveling wave dielectrophoresis
  94. Microengineered Platforms for Cell Mechanobiology
  95. Cell adherence and growth on a fabricated superhydrophobic surface
  96. Separation of malignant human breast cancer epithelial cells from healthy epithelial cells using an advanced dielectrophoresis-activated cell sorter (DACS)
  97. Characterization of Microfluidic Channels using DVD Pick-up Fluorescent Scanner
  98. AFM-based identification of the dynamic properties of globular proteins: simulation study
  99. Quantitative evaluation of cardiomyocyte contractility in a 3D microenvironment
  100. Multipurpose DVD pick-up scanner for analysis of microfluidics and micromechanical structures
  101. Biohybrid microsystems actuated by cardiomyocytes: Microcantilever, microrobot, and micropump
  102. Mechanotransduction of cardiomyocytes interacting with a thin membrane transducer
  103. Micro pumping with cardiomyocyte–polymer hybrid
  104. Establishment of a fabrication method for a long-term actuated hybrid cell robot
  105. A three-dimensional model of fluid–structural interactions for quantifying the contractile force for cardiomyocytes on hybrid biopolymer microcantilever
  106. Fabrication of patterned micromuscles with high activity for powering biohybrid microdevices
  107. Design and Application of a DEP-based Cell Sorter, for Efficiently Separating Two Types of Human MCF Cells
  108. Realistic computational modeling for hybrid biopolymer microcantilevers
  109. A highly efficient 3D micromixer using soft PDMS bonding
  110. Fabrication of complex 3D polymer structures for cell–polymer hybrid systems
  111. Design and fabrication of a largely deformable sensorized polymer actuator
  112. Identification and Control of a Sensorized Microgripper for Micromanipulation
  113. Real-Time Measurement of the Contractile Forces of Self-Organized Cardiomyocytes on Hybrid Biopolymer Microcantilevers
  114. Potential of Thermo-Sensitive Hydrogel as an Actuator
  115. Development and analysis of the vertical capacitive accelerometer
  116. Design and fabrication of an integrated cell processor for single embryo cell manipulation
  117. An efficient cell separation system using 3D-asymmetric microelectrodes
  118. Advanced controller design and implementation of a sensorized microgripper for micromanipulation
  119. Design and performance evaluation of a 3-DOF mobile microrobot for micromanipulation