All Stories

  1. New System for the Acceleration of the Airflow in Wind Turbines
  2. Bidirectional device for launching bridges
  3. Novel Technologies and Applications for Construction Materials 2016
  4. Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH
  5. Numerical simulation of bus aerodynamics on several classes of bridge decks
  6. Assessment of water penetration risk in building facades throughout Brazil
  7. A novel lightweight gypsum composite with diatomite and polypropylene fibers
  8. Detailed territorial estimation of design thermal conductivity for façade materials in North-Eastern Spain
  9. Quantitative analysis of the divergence in energy losses allowed through building envelopes
  10. Revisión y mejora de la caracterización del grado de impermeabilidad requerido por el CTE DB-HS1 para fachadas de edificación
  11. A correction factor to approximate the design thermal conductivity of building materials. Application to Spanish façades
  12. Patch loading in slender and high depth steel panels: FEM–DOE analyses and bridge launching application
  13. Improvement alternatives for determining the watertightness performance of building facades
  14. A comparison of methods for determining watertightness test parameters of building façades
  15. New mechanism for continuous and bidirectional displacement of heavy structures: Design and analysis
  16. Improvement of a System for Catchment, Pretreatment, and Treatment of Runoff Water Using PIV Tests and Numerical Simulation
  17. New launching method for steel bridges based on a self-supporting deck system: FEM and DOE analyses
  18. Thermal performance optimization of hollow clay bricks made up of paper waste
  19. Review of international regulations governing the thermal insulation requirements of residential buildings and the harmonization of envelope energy loss
  20. Procedure for a detailed territorial assessment of wind-driven rain and driving-rain wind pressure and its implementation to three Spanish regions
  21. Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results
  22. Hygrothermal study of lightweight concrete hollow bricks: A new proposed experimental–numerical method
  23. Bridge–structure interaction analysis of a new bidirectional and continuous launching bridge mechanism
  24. The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM
  25. APLICACIÓN AL CÓDIGO TÉCNICO DE LA EDIFICACIÓN DE AVANCES EN EL ESTUDIO DE LA EXPOSICIÓN A LA HUMEDAD DE FACHADAS
  26. Novel Technologies and Applications for Construction Materials
  27. Global analysis of building façade exposure to water penetration in Chile
  28. Effects of elevated temperatures on mechanical properties of concrete containing haematite evaluated using fuzzy logic model
  29. Static behavior of compressed braces in RHS K-joints of hot-dip galvanized trusses
  30. Experimental and numerical analysis of new bricks made up of polymer modified-cement using expanded vermiculite
  31. Nonlinear analysis of the pressure field in industrial buildings with curved metallic roofs due to the wind effect by FEM
  32. An extended method for comparing watertightness tests for facades
  33. A new method for determining the water tightness of building facades
  34. Combined use of wind-driven rain and wind pressure to define water penetration risk into building façades: The Spanish case
  35. A SVM-based regression model to study the air quality at local scale in Oviedo urban area (Northern Spain): A case study
  36. Non-linear numerical analysis of plywood board timber connections by DOE-FEM and full-scale experimental validation
  37. Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study
  38. Collapse of a Masonry Wall in an Industrial Building: Diagnosis by Numerical Modeling
  39. Field measurements of anchored flexible systems for slope stabilisation: Evidence of passive behaviour
  40. On the study of nearest neighbor algorithms for prevalence estimation in binary problems
  41. Optimised method for estimating directional driving rain from synoptic observation data
  42. Education for Sustainable Development: Methodology and Application within a Construction Course
  43. Study of different grouting materials used in vertical geothermal closed-loop heat exchangers
  44. Nonlinear buckling and failure analysis of a self-weighted metallic roof with and without skylights by FEM
  45. A comparative modeling study to estimate wear of concrete
  46. Estimation of the exposure of buildings to driving rain in Spain from daily wind and rain data
  47. Numerical and experimental study of a new type of clip for joining cables
  48. Effect of the vent hole geometry and welding on the static strength of galvanized RHS K-joints by FEM and DOE
  49. Optimization Based on Design of Experiments (DOE) Using Finite Element Model (FEM) Analysis Applied to Retrofitting the Church of Baldornon, Spain
  50. Non-linear thermal analysis of the efficiency of light concrete multi-holed bricks with large recesses by FEM
  51. CALIDAD DE AIRE INTERIOR Y EFICIENCIA ENERGÉTICA
  52. Non-linear analysis and calculation of the performance of a shelving protection system by FEM
  53. Non-linear thermal analysis of the efficiency of light concrete big-holed bricks by FEM
  54. Classification and Comparison of Snow Fences for the Protection of Transport Infrastructures
  55. Non-linear hygrothermal failure analysis of an external clay brick wall by FEM – A case study
  56. Stiffness of the component ‘lateral faces of RHS’ at high temperature
  57. Non-linear analysis and calculation of the performance of a shelving protection system by FEM
  58. Stabilization of sludge from earth pressure balance for use in earth embankments
  59. Application of an SVM-based regression model to the air quality study at local scale in the Avilés urban area (Spain)
  60. Steady state numerical simulation of the particle collection efficiency of a new urban sustainable gravity settler using design of experiments by FVM
  61. Design and shape optimization of a new type of hollow concrete masonry block using the finite element method
  62. Nonlinear thermal analysis of multi-holed lightweight concrete blocks used in external and non-habitable floors by FEM
  63. A FEM comparative analysis of the thermal efficiency among floors made up of clay, concrete and lightweight concrete hollow blocks
  64. Comparative analysis of TIG welding distortions between austenitic and duplex stainless steels by FEM
  65. Sound transmission loss analysis through a multilayer lightweight concrete hollow brick wall by FEM and experimental validation
  66. The use of design of experiments to improve a neural network model in order to predict the thickness of the chromium layer in a hard chromium plating process
  67. A study of the collapse of a WWII communications antenna using numerical simulations based on design of experiments by FEM
  68. Optimization of an acoustic test chamber involving the fluid-structure interaction by FEM and experimental validation
  69. Numerical simulation of the performance of a snow fence with airfoil snow plates by FVM
  70. Nonlinear explicit analysis and study of the behaviour of a new ring-type brake energy dissipator by FEM and experimental comparison
  71. Non-linear buckling analysis of a self-weighted metallic roof by FEM
  72. Thermal design optimization of lightweight concrete blocks for internal one-way spanning slabs floors by FEM
  73. Estudio comparativo experimental del comportamiento de uniones de cumbrera en cubiertas de madera laminada encolada con placas interiores de acero o tablero contrachapado de abedul
  74. Analysis and thermal optimization of an ecological ventilated self-weighted wood panel for roofs by FVM
  75. A data-driven manufacturing support system for rubber extrusion lines
  76. Analysis and study of an automobile rear seat by FEM
  77. Numerical analysis of the pressure field on curved and open self-weighted metallic roofs due to the wind effect by the finite volume method
  78. Non-linear analysis of cable networks by FEM and experimental validation
  79. Comparative Analysis of Mechanical Tensile Tests and the Explicit Simulation of a Brake Energy Dissipater by FEM
  80. Nonlinear analysis of residual stresses in a rail manufacturing process by FEM
  81. Numerical Study of Pressure Field in Laterally Closed Industrial Buildings with Curved Metallic Roofs due to the Wind Effect by FEM and European Rule Comparison
  82. Finite element analysis of the hyper-elastic contact problem in automotive door sealing
  83. Numerical analysis of the influence of material mismatching in the transition curve of welded joints
  84. A model for defining evacuation policies for emergency escape from buildings
  85. Evaluation of the resistant capacity of cable nets using the finite element method and experimental validation
  86. Non-linear thermal optimization and design improvement of a new internal light concrete multi-holed brick walls by FEM
  87. Implementation of an elastic–viscoplastic ductile model for the numerical simulation of the ductile crack growth in notched tensile and Charpy impact tests
  88. Mathematical study of the selective removal of different classes of atmospheric aerosols by coagulation, condensation, and gravitational settling, and the health impact
  89. Nonlinear thermal optimization of external light concrete multi-holed brick walls by the finite element method
  90. Finite element analysis of thin-walled composite two-span wood-based loadbearing stressed skin roof panels and experimental validation
  91. Non-linear analysis of the tubular ‘heart’ joint by FEM and experimental validation
  92. Non-linear analysis and warping of tubular pipe conveyors by the finite element method
  93. Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method
  94. Computer simulation of the laminar nozzle flow of a non-Newtonian fluid in a rubber extrusion process by the finite volume method and experimental comparison
  95. Evaluation of the damage in the vault and portico of the pre-Romanesque chapel of San Salvador de Valdediós using frictional contacts and the finite-element method
  96. Acoustic Analysis of a Sandwich Non Metallic Panel for Roofs by FEM and Experimental Validation
  97. Non-linear analysis of a reinforced concrete sheet cover (umbrella) of 40m diameter by the finite element method
  98. Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques
  99. Implicit integration procedure for viscoplastic Gurson materials
  100. Numerical analysis of pressure field on curved self-weighted metallic roofs due to the wind effect by the finite element method
  101. Non-linear thermal analysis of light concrete hollow brick walls by the finite element method and experimental validation
  102. Non-linear analysis of unbolted base plates by the FEM and experimental validation
  103. A Mathematical Approach to Selective Scavenging of the Different Classes of Typical Atmospheric Aerosols by Rainout and Health Impact
  104. Numerical Analysis of the Behaviour of Tooth Intrarradial Posts by the Finite Element Method
  105. A modified elitist genetic algorithm applied to the design optimization of complex steel structures
  106. Design and finite element analysis of a wet cycle cement rotary kiln