All Stories

  1. Microfluidic photoelectrochemical CO2 based reduction using strontium titanate with carbon nitride nanosheets
  2. Modulating tribological properties and degradation rate in Hank's solution of Zn–Mn alloys electrodeposited on Mg with variable Mn content
  3. Antioxidants in Traditional Mexican Medicine and Their Applications as Antitumor Treatments
  4. Study of the anticorrosive behavior of samarium as a corrosion inhibitor in multilayer systems for aluminum alloy
  5. Solar lighting systems applied in photocatalysis to treat pollutants – A review
  6. Competitive adsorption of anionic and cationic molecules on three activated carbons derived from agroindustrial waste
  7. Photoelectrocatalytic activity of silicon nanowires decorated with electroless copper nanoparticles and graphene oxide using a plasma jet for removal of methyl orange under visible light
  8. Geopolymeric Composite Materials Made of Sol-Gel Silica and Agroindustrial Wastes of Rice, Barley, and Coffee Husks with Wood-Like Finishing
  9. Deterioration of Novel Silver Coated Mirrors on Polycarbonate Used for Concentrated Solar Power
  10. Cerium Compounds Coating as a Single Self-Healing Layer for Corrosion Inhibition on Aluminum 3003
  11. CoO, Cu, and Ag Nanoparticles on Silicon Nanowires with Photocatalytic Activity for the Degradation of Dyes
  12. Hydrothermal Evaluation of Vernacular Housing: Comparing Case Studies of Waste PET Bottles, Stone, and Adobe Houses
  13. Cerium and Other Rare Earth Salts as Corrosion Inhibitors—A Review
  14. Heterogeneous Photocatalysis Using Electroless Deposition of Ni/NiO Nanoparticles on Silicon Nanowires for Degradation of Methyl Orange.
  15. Monitoring External Corrosion of a Pipeline Covered with a Polyolefin Tape Using Electrochemical Impedance Spectroscopy
  16. Synthesis and Hydrodynamic Modeling Study of Epoxy/Carbon Nanospheres (Epoxy-CNS) Composite Coatings for Water Filtration Applications
  17. Study of chemical, kinetic, and theoretical sorption properties of activated carbons obtained from agroindustrial origin: comparison of anionic and cationic model molecules
  18. Nanometric and surface properties of semiconductors correlated to photocatalysis and photoelectrocatalysis applied to organic pollutants – A review
  19. A Novel Green Alternative for a Room Prototype Constructed with Entire Recycled PET Bottles and a Green Roof Composed of Waste Materials
  20. Zwitterion-decorated graphene oxide nanosheets with aliphatic amino acids under specific pH conditions
  21. Harvesting energy from real human urine in a photo-microfluidic fuel cell using TiO2–Ni anode electrode
  22. Lead Adsorption in Manganese Oxides as Powders and Coatings Supported on Silica Gel Beads and Tin Inverse Opal-Like Structures
  23. Effect of Boric Acid, Sodium Nitrate, and Sodium Dodecyl Sulfate as Additives on the Hydrogen Permeation during Nickel Electroplating on Palladium Electrodes
  24. Portable vapor-compression solar refrigeration system for use in the agricultural harvesting site
  25. Thermal Energy Storage by the Encapsulation of Phase Change Materials in Building Elements—A Review
  26. A review on atmospheric pressure plasma jet and electrochemical evaluation of corrosion
  27. Portable Hybrid Refrigerator Prototype for Agribusiness With Its 3D Real Physical Geometry Scanned and Transferred for Simulation Software
  28. Copper Black Coatings for the Absorption of Solar Concentration With an APPJ SiO2 Super-Hydrophobic Protection
  29. Coatings with embedded particles to increase interfacial anchorage of steel and GFRP rebars in concrete
  30. Encapsulation of toxic heavy metals from waste CRT using calcined kaolin base-geopolymer
  31. TiO2 Nanotubes Transformation Into 4nm Anatase Nanoparticles
  32. Prospects for the Use of Electrooxidation and Electrocoagulation Techniques for Membrane Filtration of Irrigation Water
  33. Quantitative evaluation for the ASTM D4541-17/D7234 and ASTM D3359 adhesion norms with digital optical microscopy for surface modifications with flame and APPJ
  34. Evaluating the Thermal Behavior of a Sustainable Room and Roof Prototype Using Recycled Waste Materials
  35. Preparation of nanoparticulate TiO2 containing nanocrystalline phases of anatase and brookite by electrochemical dissolution of remelted titanium components
  36. Effect of Swelling of Chemical Reagents and the Sulfuric-Chromic Acid Bath on Surface Texturizing of Poly(Acrylonitrile-Butadiene-Styrene)
  37. Sustainability Metrics for Housing and the Thermal Performance Evaluation of a Low-Cost Prototype Made with Poly (Ethylene Terephthalate) Bottles
  38. Composite Materials Based on Henequen Fiber as a Thermal Barrier in the Automotive Sector
  39. TiO2 Nanotubes Transformation Into 4nm Anatase Nanoparticles
  40. Fly ash lightweight material of the cellular concrete type using sol-gel and thermal treatment
  41. Electrodeposition of Co-B/SiC Composite Coatings: Characterization and Evaluation of Wear Volume and Hardness
  42. Bamboo Metallization for Aesthetic Finishing of Furniture and Wood Decorative Objects by An Electroless/Electrolytic Process
  43. Electrodeposition of Co-B/SiC Composite Coatings: Characterization and Evaluation of Wear Volume and Hardness
  44. Molecular Identification of Fungi in Outdoor Sandstones of Cultural Heritage Buildings for Modeling Their Biodeterioration
  45. Effect of heat treatment on the hardness and wear resistance of electrodeposited Co-B alloy coatings
  46. 3D Scanning and Simulation of a Hybrid Refrigerator Using Photovoltaic Energy
  47. Silver/Silicon nanowires/copper nanoparticles heterojunction for methyl orange degradation by heterogeneous photocatalysis under visible irradiation
  48. Composite materials with graphenic materials by extrusion for 3D printing
  49. A geopolymeric composite of non-calcined rice husks made of metakaolin/sol–gel silica
  50. Effect of oxygen vacancies in electrodeposited NiO towards the oxygen evolution reaction: Role of Ni-Glycine complexes
  51. 3D Scanning and Simulation of a Hybrid Refrigerator Using Photovoltaic Energy
  52. Electrochemical Synthesis of Co3O4-xFilms for Their Application as Oxygen Evolution Reaction Electrocatalysts: Role of Oxygen Vacancies
  53. Hardness and Corrosion Resistance of Ni/NiB Bi-Layer and Ni/NiB/NiB-PTFE Tri-Layer Coatings Prepared by Electrodeposition and Dynamic Chemical Plating (DCP) Techniques
  54. Modification of the Al0.9Zn0.05Sn0.05 Alloy Microstructure by Cold Working and Chemical Composition
  55. Characterization and corrosion resistance of electroless black Ni-P coatings of double black layer on carbon steel
  56. Characterization and electrochemical treatment of a kaolin
  57. Corrosion Study of Electroless Deposited Nickel-Phosphorus Solar Absorber Coatings on Carbon Steel
  58. Electrodeposition of Co-B hard coatings: characterization and tribological properties
  59. Reversible photochromic effect in the TiO2—polymer hybrid system
  60. Silver Coatings with Protective Transparent Films for Solar Concentrators
  61. Samarium Additive Effect onto the Nickel Electrodeposition Process
  62. The Effect of Boron Content, Crystal Structure, Crystal Size on the Hardness and the Corrosion Resistance of Electrodeposited Ni-B Coatings
  63. Electrodeposition of Ni-P/SiC Composite Films with High Hardness
  64. Nobel anatase photocatalytic particles by transforming nanotubes of anodized waste titanium
  65. A phenomenon of degradation of methyl orange observed during the reaction of NH4TiOF3 nanotubes with the aqueous medium to produce TiO2 anatase nanoparticles
  66. Multifunctional Polymer/Nano-TiO2 Photochromic Hybrid Coatings as a Barrier for Protection against Corrosion
  67. Organobentonites with Crystalline Layer Separation Used for Adsorption in Water Treatment
  68. Silver Coatings with Protective Transparent Films for Solar Concentrators
  69. Electrophoretical Deposition of Nanotube TiO2 Conglomerates Detached During Ti Anodizing Used for Decomposing Methyl Orange in Water
  70. Novel Synthesis of 4nm Anatase Nanoparticles at Room Temperature Obtained from TiO2 Nanotube Structures by Anodizing Ti
  71. Novel green process to modify ABS surface before its metallization: optophysic treatment
  72. In Situ Chemical Oxidation Based on Hydrogen Peroxide: Optimization of Its Application to an Hydrocarbon Polluted Site
  73. Adsorption of lead (II) on SBA-15 mesoporous molecular sieve functionalized with –NH2 groups
  74. Hydrogen Storage Enhancement Attained by Fixation of Ti on MWNTs
  75. Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process
  76. Effect of porosity on the absorbed, reemitted and transmitted light by a geopolymer metakaolin base
  77. The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer
  78. Synthesis and characterization of a concrete based on metakaolin geopolymer
  79. Characterizations of silver alloys used in modern Mexican coins
  80. Bonding titanium on multi-walled carbon nanotubes for hydrogen storage: An electrochemical approach
  81. The action of molasses on properties of coatings obtained with electrodeposition from a SiO2 aqueous suspension
  82. Differential photoacoustic cell for electrochemical and dynamic process with temperature control
  83. Band gap energy determination by photoacoustic absorption and optical analysis of Cd1−xZnxTe for low zinc concentrations
  84. Origin of Interference Colors on Austenitic Stainless Steel
  85. Mechanisms Involved in the Deposition of Coatings from Aqueous Colloidal Suspensions of Silica in an Electric Field
  86. Molecular aggregation and shape effects in the optical spectra of organic dye molecules in SiO2 and SiO2-PMMA matrices
  87. Optical Processes in PMMA, SiO2, and Hybrid Organic−Inorganic Sol−Gel Films Colored with Rhodamine 6GDN
  88. CUCUMBER GROWTH AND YIELD AS AFFECTED BY MULCHING IN SOILLESS CULTURE IN UNHEATED GREENHOUSE
  89. Oxygen diffusion in silicon oxide films produced by different methods
  90. Optical processes in SiO2 Sol-Gel Glass Colored with organic dyes
  91. Improved light stability of colored SiO2 coatings containing organic and metalorganic dye molecules
  92. Influence of Te inclusions and precipitates on the crystalline and thermal properties of CdTe single crystals
  93. Effect of gelation and ball milling on the optical absorption and emission of macrilon yellow dye molecules trapped in silica prepared by the sol–gel method
  94. Organic–inorganic system of two-dimensional quantum wells prepared by the dye incorporation into sol–gel glass
  95. Growth and characterization of Cd1−xZnxTe crystals with high Zn concentrations
  96. The effect of ball milling dispersion on the optical properties of organic dyes trapped in silica films by the sol–gel method
  97. Thermal and electrical characterization of (CdTe)1−Te composites: electron–phonon system
  98. Investigation of the two-dimensional quantum wells made by the dye incorporation into the SiO/sub 2/ sol-gel glass
  99. Structural and electrical properties of SiO/sub 2/ thin films produced by the different methods
  100. Organic-inorganic system of quantum wells derived by the sol-gel technology