All Stories

  1. Sweet Corrosion Inhibition by CO2 Capture
  2. Behavior of Ni20Cr Alloy in Molten Nitrate Salts
  3. Synthesis by Hydrothermal Treatment of ZnO-Based Varistors Doped with Rare Earth Oxides and Their Characterization by Impedance Spectroscopy
  4. Effect of Noble Metal Addition on the Disorder Dynamics of Ni3Al by Means of Monte Carlo Simulation
  5. Sustainable Development of Corrosion Inhibitors from Electronic Scrap: Synthesis and Electrochemical Performance
  6. Corrosion protection of 1018 carbon steel using an avocado oil-based inhibitor
  7. Electrophoretic Deposition of Chitosan Films Doped with Nd2Ti2O7 Nanoparticles as Protective Coatings against Corrosion in Saline Solutions
  8. Electrochemical Performance of Ti-Based Commercial Biomaterials
  9. Performance of an amide-based inhibitor derived from coffee bagasse oil as corrosion inhibitor for X70 steel in CO2-saturated brine
  10. Development and evaluation of a green corrosion inhibitor based on rice bran oil obtained from agro-industrial waste
  11. Effect of Nd3+ Ion Concentration on the Corrosion Resistance of API X70 Steel in Chloride-Rich Environments
  12. Modelling of Behavior for Inhibition Corrosion of Bronze Using Artificial Neural Network (ANN)
  13. Biodiesel from “Morelos” Rice: Synthesis, Oxidative Stability, and Corrosivity
  14. Effect of the Noble Metals Addition on the Oxidation Behavior of Ni3Al
  15. Use of an amide-type corrosion inhibitor synthesized from the coffee bagasse oil on the corrosion of Cu in NaCl
  16. Use of Salvia hispanica as an eco-friendly corrosion inhibitor for bronze in acid rain
  17. Part 1: Design and development of new sustainable coatings applied on aluminium 6061 alloy-RRA heat treated for engineering applications
  18. Influence of Oxidation Treatments and Surface Finishing on the Electrochemical Behavior of Ni-20Cr HVOF Coatings
  19. Effect of methanol on the corrosion behaviour of Al-Cu Alloys in sulphuric acid
  20. High Temperature Corrosion of Nickel in NaVO3-V2O5Melts
  21. Correlation between mechanical properties and corrosion behavior of an Al 6061 alloy coated by 5% CH 3 COOH pressurized steam and RRA heat treated
  22. Fatty Amides from Crude Rice Bran Oil as Green Corrosion Inhibitors
  23. Oil Extraction from “Morelos Rice” Bran: Kinetics and Raw Oil Stability
  24. Chemical, Physical and Electrochemical Characterization of Two Stainless Steels Exposed in NaVO3 Molten Salt at 700°C
  25. Electrochemical Corrosion of HVOF-Sprayed NiCoCrAlY Coatings in CO2-Saturated Brine
  26. Electrochemical Analysis and Quantum Chemistry of Castor Oil-Based Corrosion Inhibitors
  27. Effect of Pt, Pd, Au and Ag on oxidation behaviour of Fe3Al intermetallic
  28. Corrosion Performance of Cu-Based Coins in Artificial Sweat
  29. Microstructural Changes during High Temperature Service of a Cobalt-Based Superalloy First Stage Nozzle
  30. “A study on the effect of Co, Cr and Ti on the corrosion of FE40AL intermetallic in molten NaCl–KCl mixture”
  31. Effect of Cu Addition on the Electrochemical Corrosion Performance of Ni3Al in 1.0 M H2SO4
  32. Influence of the Chemical Composition in the Electrochemical Response of Permanent Magnets
  33. Corrosion Performance of Fe-Cr-Ni Alloys in Artificial Saliva and Mouthwash Solution
  34. Effect of the Unsaturation of the Hydrocarbon Chain of Fatty-Amides on theCO2Corrosion of Carbon Steel Using EIS and Real-Time Corrosion Measurement
  35. Electrochemical study on effect of Au, Ag, Pd and Pt on corrosion behaviour of Fe3Al in molten NaCl–KCl
  36. EIS Evaluation of Fe, Cr, and Ni in NaVO3at 700°C
  37. High Temperature Corrosion of Inconel 600 in NaCl-KCl Molten Salts
  38. Effect of the Diesel, Inhibitor, and CO2Additions on the Corrosion Performance of 1018 Carbon Steel in 3% NaCl Solution
  39. Corrosion Behavior of Pure Cr, Ni, and Fe Exposed to Molten Salts at High Temperature
  40. Electrochemical Study of Ni20Cr Coatings Applied by HVOF Process in ZnCl2-KCl at High Temperatures
  41. Corrosión y degradación de materiales por biocombustibles
  42. Characterization of steel surface under cathodic protection in seawater
  43. Phase Stability Diagrams for High Temperature Corrosion Processes
  44. Corrosion behavior of Fe3Al intermetallics with addition of lithium, cerium and nickel in 2.5 % SO2+N2 at 900 °C
  45. Effect of Minor Alloying Elements on the Corrosion Behavior of Fe40Al in NaCl-KCl Molten Salts
  46. Corrosion Behavior of Fe40Al Alloy with Additions of Ti, Ag, and Cr in Molten KCl +ZnCl2
  47. Hot Corrosion Behavior of High-Chromium, High-Carbon Cast Irons in NaCl-KCl Molten Salts
  48. Corrosion Evaluation of NiCrAlCoY Coating Applying Electrochemical Noise and Lineal Polarization Resistance Techniques
  49. Failure Investigation of the 69 MW Gas Turbine of Combined Cycle Unit
  50. An electrochemical study of the effect of Li on the corrosion behavior of Ni3Al intermetallic alloy in molten (Li+K) carbonate
  51. Last stage blades failure analysis of a 28MW geothermal turbine
  52. Evaluation of Coated Stainless Steels for Bipolar Plates in Fuel Cells Type PEM
  53. Effect of heat treatment and chemical composition on the corrosion behavior of FeAl intermetallics in molten (Li+K)carbonate
  54. Electrochemical noise analysis in the frequency domain and determination of corrosion rates for SS-304 stainless steel
  55. Corrosion performance of heat resistant alloys in Na2SO4–V2O5 molten salts
  56. Corrosion monitoring using electrochemical noise and linear polarization resistance in fuel oil combustion gas environment
  57. An Electrochemical Study of the Effect of Β on the Corrosion of Atomized Fe40Al Intermetallics in Molten Na2S04
  58. Corrosion behavior of Fe-Si metallic coatings added with NiCrAlY in an environment of fuel oil ashes at 700°C
  59. Molten salt corrosion resistance of FeAl alloy with additions of Li, Ce and Ni
  60. Effect of Boron on the Hot Corrosion Resistance of Sprayed Fe40Al Intermetallics
  61. Study of molten salt corrosion of HK-40m alloy applying linear polarization resistance and conventional weight loss techniques
  62. Corrosion Evaluation of Alloy 800 in Sulfate/Vanadate Molten Salts
  63. Effect of Li, Ce and Ni on the Corrosion Resistance of Fe3Al in Molten Na2So4 and NaVO3
  64. Deposition of Diamond in Copper by Triboadhesion
  65. High temperature corrosion performance of FeAl intermetallic alloys in molten salts
  66. Corrosion of atomized Fe40Al based intermetallics in molten Na2SO4
  67. Study of hot corrosion of alloy 800 using linear polarisation resistance and weight loss measurement
  68. Electrochemical Studies on High-Temperature Corrosion of Silicon-Iron Coatings and Iron Aluminide Intermetallic Alloys by Molten Salts
  69. Hot corrosion of atomized iron aluminides doped with boron and reinforced with alumina
  70. Oxidation Behavior of Atomized Fe40Al Intermetallics Doped with Boron and Reinforced with Alumina Fibers
  71. Percolation phenomena in carbon black-filled polymeric concrete
  72. Oxidation behaviour of Fe–Si thermal spray coatings
  73. High-temperature electrochemical testing of spray atomized and deposited iron aluminides alloyed with boron and reinforced with alumina particulate
  74. High-Temperature Degradation and Protection of Ferritic and Austenitic Steels in Steam Generators
  75. Protection of Carbon Steel against Hot Corrosion Using Thermal Spray Si- and Cr-Base Coatings
  76. Ultrasonic Characterization of Nickel-Chromium-Base Anticorrosive Coatings
  77. High-Temperature Degradation and Protection of Ferritic and Austenitic Steels in Steam Generators
  78. Protection of Carbon Steel against Hot Corrosion Using Thermal Spray Si- and Cr-Base Coatings
  79. Caracterización de recubrimientos Ni-P depositados por reducción química autocatalítica en superficies internas