All Stories

  1. Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys
  2. Remarkable mechanical properties at room and cryogenic temperatures in a metastable high-entropy system through BCC and HCP martensitic transformations
  3. Shear mechanical properties of AISI 316L stainless steel processed by unidirectional/cross rolling and annealing treatment
  4. Improved Mechanical Properties of ZX21 Magnesium Alloy by Mischmetal Addition and Hot Deformation
  5. Mechanical properties and corrosion behavior of biodegradable Mg-Cu alloys
  6. Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review
  7. Overcoming strength-ductility trade-off in Si-containing transformation-induced plasticity high-entropy alloys via metastability engineering
  8. Annealing of an Austenitic Stainless Steel Deformed Under Shear Loading
  9. Hot deformation behavior analysis of as-cast CoCrFeNi high entropy alloy using Arrhenius-type and artificial neural network models
  10. Improved ductility of hot extruded Mg-0.5Zn-0.5Zr-1RE alloy by Li addition
  11. Improved hardness of Mg-0.5Ni-xY alloys via grain refinement and formation of LPSO structures
  12. Mechanical properties of lightweight Mg-1RE-0.5Zn-0.5Zr-xLi alloys
  13. Tailoring the microstructure, mechanical properties, and electrical conductivity of Cu–0.7Mg alloy via Ca addition, heat treatment, and severe plastic deformation
  14. Tensile Properties and Corrosion Behavior of Biodegradable In Situ Formed Mg–Si Alloys and Composites
  15. Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel
  16. Tailoring the microstructure and mechanical properties of LPSO-containing Mg–Ni cast alloy by yttrium addition
  17. Artificial neural network applicability in studying hot deformation behaviour of high-entropy alloys
  18. Enhanced corrosion resistance of the as-cast AZ91 magnesium alloy by micro-addition of the strontium and rare earth elements
  19. Grain size dependent mechanical properties of CoCrFeMnNi high-entropy alloy investigated by shear punch testing
  20. Phase transformation kinetics of high-carbon steel during continuous heating
  21. Precipitation kinetics of gamma double prime phase during direct aging treatment of Inconel 718 superalloy additively manufactured by selective laser melting
  22. Unveiling the effects of Ti microalloying and thermomechanical processing on recrystallization behavior and mechanical properties of type 316 stainless steel
  23. Tailoring the microstructure and mechanical properties of superaustenitic stainless steel by cold rolling and recrystallization annealing
  24. Tailoring the Mechanical Properties of Copper‐Added Transformation‐Induced Plasticity‐Aided Multiphase Steel by Thermomechanical Processing
  25. Tailoring the microstructure and mechanical properties of (CrMnFeCoNi)100-C high-entropy alloys: Machine learning, experimental validation, and mathematical modeling
  26. Shear punch testing for evaluation of mechanical properties of post heat-treated Inconel 718 nickel-based superalloy fabricated by additive manufacturing
  27. Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys
  28. Superplasticity of a hot rolled Mg–3Zn–0.5RE–0.5Zr (ZEK300) alloy
  29. Explaining the drop of work-hardening rate and limitation of transformation-induced plasticity effect in metastable stainless steels during tensile deformation
  30. Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
  31. Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured inconel 718 superalloy
  32. Tailoring the strength-ductility balance of a commercial austenitic stainless steel with combined TWIP and TRIP effects
  33. Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: A review
  34. Precipitation kinetics and mechanical properties of Mg–Y–Zn and Mg–Y–Ni alloys containing long-period stacking ordered (LPSO) structures
  35. Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy
  36. Superplasticity of fine-grained magnesium alloys for biomedical applications: A comprehensive review
  37. A review of Mg alloys containing long-period stacking ordered (LPSO) structures with insight into the application of friction stir processing
  38. Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing
  39. Dependency of work-hardening behavior of a metastable austenitic stainless steel on the nucleation site of deformation-induced martensite
  40. Mechanical Properties and Corrosion Behavior of Biodegradable Mg–0.5Zr–0.5Ca– x Zn Magnesium Alloys
  41. Grain size dependent mechanical behavior and TRIP effect in a metastable austenitic stainless steel
  42. Elucidating the effects of cold rolling route on the mechanical properties of AISI 316L austenitic stainless steel
  43. Microstructure and mechanical properties of as-cast and wrought Mg–Ni in-situ formed alloys
  44. Thermal stability, grain growth kinetics, mechanical properties, and bio-corrosion resistance of pure Mg, ZK30, and ZEK300 alloys: A comparative study
  45. Tailoring the mechanical properties of austempered low-carbon ferritic–bainitic/martensitic dual-phase steel
  46. Enhancing the elevated temperatures tribological properties of Al–Mg2Si composites by in-situ addition of Ti-based intermetallics and hot working
  47. Post-processing of additively manufactured high-entropy alloys - A review
  48. On the solidification characteristics and corrosion resistance of in situ Mg–3Si-xCu composites
  49. Effects of titanium addition on the microstructure and mechanical properties of quaternary CoCrFeNi high entropy alloy
  50. Grain Growth in High-Entropy Alloys (HEAs): A Review
  51. Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: A review
  52. Tribological behavior of as-cast and wrought Al-Mg2Si hybrid composites reinforced by Ti-based intermetallics
  53. Heterostructured stainless steel: Properties, current trends, and future perspectives
  54. Effect of grain size on the mechanical properties and bio-corrosion resistance of pure magnesium
  55. Tailoring the tensile properties of AZ91 magnesium alloy via grain refinement
  56. Effect of Variation of Martensite with a Constant Carbon Content on Mechanical Behavior and Sliding Wear of Dual Phase Steels
  57. Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress
  58. Enhanced mechanical properties of as-cast rare earth bearing magnesium alloy via elevated-temperature homogenization
  59. Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working
  60. Cold unidirectional/cross-rolling of austenitic stainless steels: a review
  61. Superplasticity of bulk metallic glasses (BMGs): A review
  62. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys
  63. Mechanical properties of as-cast and wrought Mg–5Ni-xAl magnesium alloys
  64. Tailoring the mechanical properties of hypereutectic in situ Al–Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion
  65. Detailed Hall–Petch Analysis of Cold Rolled and Annealed Duplex 2205 Stainless Steel
  66. Microstructure, mechanical properties, and pitting corrosion resistance of SAF 2205 duplex stainless steel after friction hydro-pillar processing
  67. Microstructures and mechanical performance of Mg–4Si–6Ni–xY in situ composite after extrusion process
  68. Amorphization, mechano-crystallization, and crystallization kinetics of mechanically alloyed AlFeCuZnTi high-entropy alloys
  69. Microstructure and Mechanical Properties of Dual‐Phase Steels by Combining Adjusted Initial Microstructures and Severe Plastic Deformation
  70. Superplasticity of high-entropy alloys: a review
  71. Enhanced mechanical properties of Mg–Ni–xRE alloys via hot extrusion
  72. Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy
  73. Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys
  74. Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing
  75. Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg–Mg2Si composites
  76. High strain rate superplasticity via friction stir processing (FSP): A review
  77. Tempering kinetics and corrosion resistance of quenched and tempered AISI 4130 medium carbon steel
  78. Enhanced tensile properties of as-cast Mg-10Al magnesium alloy via strontium addition and hot working
  79. Processing, microstructure adjustments, and mechanical properties of dual phase steels: a review
  80. Recent advances in the kinetics of normal/abnormal grain growth: a review
  81. Finite element analysis of plastic deformation in shear punch test
  82. Enhanced mechanical properties of dual phase steel via cross rolling and intercritical annealing
  83. Mechanical response of a metastable austenitic stainless steel under different deformation modes
  84. Enhanced mechanical properties of AZ91 magnesium alloy by inoculation and hot deformation
  85. Effects of spheroidization heat treatment and intercritical annealing on mechanical properties and corrosion resistance of medium carbon dual phase steel
  86. Mechanical alloying and consolidation of copper‐iron‐silicon carbide nanocomposites
  87. Delta processing effects on the creep behavior of a typical Nb-bearing nickel-based superalloy
  88. Mechanical Behavior of As-Cast and Extruded Mg-Si-Ni-Ca Magnesium Alloys
  89. A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite
  90. Deformation-induced martensite in austenitic stainless steels: A review
  91. Improved properties of dual-phase steel via pre-intercritical annealing treatment and thermal cycling
  92. Transformation-induced plasticity (TRIP) in advanced steels: A review
  93. Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel
  94. Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion
  95. Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field
  96. A review of recent progress in mechanical and corrosion properties of dual phase steels
  97. Evolutions of mechanical properties of AISI 304L stainless steel under shear loading
  98. Crystallization kinetics of mechanically alloyed amorphous Fe-Ti alloys during annealing
  99. Unraveling the Effect of Deformation Temperature on the Mechanical Behavior and Transformation‐Induced Plasticity of the SUS304L Stainless Steel
  100. Elucidating the effects of microsegregation on the precipitation phenomena in as-cast Nb-bearing superalloy
  101. Precipitation kinetics of γ″ phase and its mechanism in a Nb-bearing nickel-based superalloy during aging
  102. Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels
  103. Thermal Mechanisms of Grain Refinement in Steels: A Review
  104. Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel
  105. Effects of hot rolling and homogenisation treatment on low alloy steel ingot
  106. Effects of tempering on the mechanical and corrosion properties of dual phase steel
  107. Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel
  108. Unraveling the effects of surface preparation on the pitting corrosion resistance of austenitic stainless steel
  109. Tempering of Cold-Rolled Martensite in Mild Steel and Elucidating the Effects of Alloying Elements
  110. Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process
  111. Unexpected formation of delta (δ) phase in as-cast niobium-bearing superalloy at solution annealing temperatures
  112. Static recrystallization kinetics of ferrite in cold-deformed medium carbon steel
  113. Estimation of homogenisation time for superalloys based on a new diffusional model
  114. Effect of grain size on the corrosion resistance of low carbon steel
  115. Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy
  116. Numerical and analytical solutions for determination of interdiffusion coefficients in superalloys during homogenization
  117. Microstructure tailoring for property improvements of DP steel via cyclic intercritical annealing
  118. Unraveling the Effect of Martensite Volume Fraction on the Mechanical and Corrosion Properties of Low‐Carbon Dual‐Phase Steel
  119. Interdiffusion coefficients of alloying elements in a typical Ni-based superalloy
  120. Effect of Gd on Dynamic Recrystallization Behavior of Magnesium During Hot Compression
  121. Evaluating the Effect of Hot‐Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum–Magnesium–Silicon (Al‐Mg 2 Si) Composites
  122. Processing Route Effects on the Mechanical and Corrosion Properties of Dual Phase Steel
  123. Phase transformation mechanism and kinetics during step quenching of st37 low carbon steel
  124. Grain refinement and enhanced mechanical properties of ZK20 magnesium alloy via hot extrusion and mischmetal addition
  125. Improved Mechanical Properties of Structural Steel via Developing Bimodal Grain Size Distribution and Intercritical Heat Treatment
  126. Ferrite recrystallisation and intercritical annealing of cold-rolled low alloy medium carbon steel
  127. Amorphization and mechano-crystallization of high-energy ball milled Fe Ti alloys
  128. Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5Ca-0.5RE magnesium alloy
  129. Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al magnesium alloy
  130. Dependency of Natural Aging on the Ferritfoe Grain Size in Dual-Phase Steel
  131. Aging kinetics and mechanical properties of copper-bearing low-carbon HSLA-100 microalloyed steel
  132. Toward understanding the origins of poor ductility in a metal-matrix composite processed by accumulative roll bonding (ARB)
  133. Mechanical properties of Mg-Al-Mn magnesium alloys with low Al content in the as-cast and extruded conditions
  134. Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel
  135. Revisiting the Diffusion of Niobium in an As-Cast Nickel-Based Superalloy During Annealing at Elevated Temperatures
  136. Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging
  137. Constitutive analysis of wrought Mg-Gd magnesium alloys during hot compression at elevated temperatures
  138. A new intermetallic phase formation in Mg Si Ni magnesium-based in-situ formed alloys
  139. Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing
  140. Texture development during hot deformation of Al/Mg alloy reinforced with ceramic particles
  141. Improved mechanical properties of mild steel via combination of deformation, intercritical annealing, and quench aging
  142. Effect of Intercritical Annealing Time at Pearlite Dissolution Finish Temperature (Ac1f) on Mechanical Properties of Low-Carbon Dual-Phase Steel
  143. Homogenization kinetics of a typical nickel-based superalloy
  144. Effect of Si and Ni on microstructure and mechanical properties of in-situ magnesium-based composites in the as-cast and extruded conditions
  145. Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing
  146. Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel
  147. Effect of Intercritical Annealing Conditions on Grain Growth Kinetics of Dual Phase Steel
  148. Spheroidization heat treatment and intercritical annealing of low carbon steel
  149. Tempering of deformed and as-quenched martensite in structural steel
  150. Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg‑Al2Ca‑Mg2Ca in-situ composite by hot extrusion
  151. Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel
  152. Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite
  153. Microstructural investigation of Al-Mg/B 4 C composite deformed at elevated temperature
  154. Enhancement of mechanical properties of low carbon dual phase steel via natural aging
  155. Enhancement of work-hardening behavior of dual phase steel by heat treatment
  156. Revealing the As-Cast and Homogenized Microstructures of Niobium-Bearing Nickel-Based Superalloy
  157. Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension
  158. Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy
  159. Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel
  160. Contribution of Different Hardening Mechanisms during Cold Working of AISI 304L Austenitic Stainless Steel
  161. Mechanical properties and fracture behavior of intercritically annealed AISI 4130 chromoly steel
  162. Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing
  163. Mechanical properties of a hot deformed Al-Mg 2 Si in-situ composite
  164. Enhanced Ductility of a Fine-Grained Mg-Gd-Al-Zn Magnesium Alloy by Hot Extrusion
  165. Refinement of Banded Structure via Thermal Cycling and Its Effects on Mechanical Properties of Dual Phase Steel
  166. Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel
  167. The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys
  168. Controlling the mechanical properties of carbon steel by thermomechanical treatment
  169. Dynamic deformation response of Al-Mg and Al-Mg/B 4 C composite at elevated temperatures
  170. The effects of primary thermo-mechanical processing routes and intercritical annealing on the mechanical properties of st37 low carbon steel
  171. Effect of Intercritical Annealing on Mechanical Properties and Work-Hardening Response of High Formability Dual Phase Steel
  172. Elucidating the effect of intermetallic compounds on the behavior of Mg–Gd–Al–Zn magnesium alloys at elevated temperatures
  173. Unraveling the Initial Microstructure Effects on Mechanical Properties and Work-Hardening Capacity of Dual-Phase Steel
  174. Enhanced mechanical properties of dual-phase steel by repetitive intercritical annealing
  175. Processing of Cu-Fe and Cu-Fe-SiC nanocomposites by mechanical alloying
  176. Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels
  177. Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys
  178. Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire
  179. Toward unraveling the effects of intermetallic compounds on the microstructure and mechanical properties of Mg–Gd–Al–Zn magnesium alloys in the as-cast, homogenized, and extruded conditions
  180. Tailoring the Microstructure and Mechanical Properties of Dual Phase Steel Based on the Initial Microstructure
  181. Modification of As-cast Al-Mg/B4C composite by addition of Zr
  182. A comprehensive approach for quantitative characterization and modeling of composite microstructures
  183. Prevention of surface hot shortness, development of banded structure, and mechanical properties of hot rolled Cu-bearing steel
  184. Toward Unraveling the Importance of Deformed Microstructure before TRIP Heat Treatment in Transformation-Induced Plasticity Steels
  185. Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures
  186. Toward unraveling the mechanisms responsible for the formation of ultrafine grained microstructure during tempering of cold rolled martensite
  187. Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth
  188. Physically-based constitutive modeling of NiTi intermetallic compound during hot deformation
  189. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
  190. A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels
  191. A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
  192. Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy
  193. Physically based constitutive description of OFHC copper at hot working conditions
  194. Mathematical modeling of energy transfer to sheet surface layers and optimization of roll bonding strength
  195. Unraveling the Effect of Thermomechanical Treatment on the Dissolution of Delta Ferrite in Austenitic Stainless Steels
  196. Crystal Plasticity Analysis of Texture Evolution of Pure Aluminum During Processing by a New Severe Plastic Deformation Technique
  197. Dependency of Deformation Behavior of Retained Austenite in TRIP Steels on Microstructural and Chemical Homogeneity
  198. Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy
  199. Unraveling the Effect of Homogenization Treatment on Decomposition of Austenite and Mechanical Properties of Low-Alloyed TRIP Steel
  200. Deformation of Pure Aluminum Along the Groove Path of ECAP-Conform Process
  201. A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation
  202. The effect of primary thermo-mechanical treatment on TRIP steel microstructure and mechanical properties
  203. A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
  204. Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions
  205. Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels
  206. Hot compression behavior of GZ31 magnesium alloy
  207. Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys
  208. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect
  209. Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning
  210. Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation
  211. Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment
  212. Constitutive Description of 7075 Aluminum Alloy During Hot Deformation by Apparent and Physically-Based Approaches
  213. Multi-Axial Incremental Forging and Shearing as a New Severe Plastic Deformation Processing Technique
  214. Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites
  215. Estimation of the kinetics of martensitic transformation in austenitic stainless steels by conventional and novel approaches
  216. Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models
  217. Estimating interface bonding strength in clad sheets based on tensile test results
  218. Hot deformation and dynamic recrystallization of NiTi intermetallic compound
  219. Abnormal grain growth in AISI 304L stainless steel
  220. Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation
  221. A comparative study on the hot flow stress of Mg–Al–Zn magnesium alloys using a simple physically-based approach
  222. Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties
  223. Prediction of Temperatures of Austenite Equilibrium Transformations in Steels During Thermomechanical Processing
  224. Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel
  225. Molecular dynamics simulation of stress field around edge dislocations in Aluminum
  226. Constitutive description of severely deformed metals based on dimensional analysis
  227. Optimization of turning process using artificial intelligence technology
  228. Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size
  229. Development of dynamic recrystallization maps based on the initial grain size
  230. Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel
  231. Modeling the compressive strength of cement mortar nano-composites
  232. EBSD study of a hot deformed austenitic stainless steel
  233. Constitutive relationships for hot deformation of austenite
  234. Modeling and Prediction of Hot Deformation Flow Curves
  235. Hot deformation behavior of a medium carbon microalloyed steel
  236. The rate of dynamic recrystallization in 17-4 PH stainless steel
  237. Hot deformation behaviour of precipitation hardening stainless steel
  238. Ball milling criteria for producing nano intermetallic compounds
  239. Prediction of the critical conditions for initiation of dynamic recrystallization
  240. Extrapolation of flow curves at hot working conditions
  241. Grain growth in nanocrystalline iron and Fe-Al alloys
  242. Flow stress prediction at hot working conditions
  243. Evaluation of cast-on-strap joints in lead-acid batteries
  244. Flow Curve Analysis of 17-4 PH Stainless Steel under Hot Compression Test
  245. Aging kinetics of 17-4 PH stainless steel
  246. Fluidity of Al–Si semisolid slurries during rheocasting by a novel process
  247. ANN modeling of strain-induced martensite and its applications in metastable austenitic stainless steels
  248. Effects of rheocasting parameters on the microstructure of rheo-centrifuged cast Al–7.1wt%Si alloy
  249. Modeling the reversion of martensite in the cold worked AISI 304 stainless steel by artificial neural networks
  250. Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel
  251. Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds
  252. Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds