All Stories

  1. Calibration of the comprehensive NDHA-N 2 O dynamics model for nitrifier-enriched biomass using targeted respirometric assays
  2. Optimal Design and Planning of Glycerol-Based Biorefinery Supply Chains under Uncertainty
  3. A novel fuzzy-logic control strategy minimizing N 2 O emissions
  4. Mechanistic Fermentation Models for Process Design, Monitoring, and Control
  5. Model-based plantwide optimization of large scale lignocellulosic bioethanol plants
  6. Understanding N 2 O formation mechanisms through sensitivity analyses using a plant-wide benchmark simulation model
  7. Supply Chain Optimization of Integrated Glycerol Biorefinery: GlyThink Model Development and Application
  8. A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes
  9. Uncertainty assessment of equations of state with application to an organic Rankine cycle
  10. A Consistent Methodology Based Parameter Estimation for a Lactic Acid Bacteria Fermentation Model
  11. An Empirical Model for Carbon Recovery in a Rotating Belt Filter and Its Application in the Frame of Plantwide Evaluation
  12. Biorefinery Sustainability Analysis
  13. Uncertainty & sensitivity analysis of economic assessment of lactic acid production from crude glycerol – impact of price correlations
  14. Uncertainty and Sensitivity Analysis for an Ibuprofen Synthesis Model Based on Hoechst Path
  15. A simplified kinetic and mass transfer modelling of the thermal hydrolysis of vegetable oils
  16. Data Validation and Modelling of Thermodynamic Properties of Systems with Active Pharmaceutical Ingredients (APIs) in Complex Media for Skin Absorption Processes
  17. Methodology for Plantwide Design and Optimization of Wastewater Treatment Plants
  18. Multi-scale Modeling Approach for Design and Optimization of Oleochemical Processes
  19. Powder stickiness in milk drying: uncertainty and sensitivity analysis for process understanding
  20. Techno-economic analysis of resource recovery technologies for wastewater treatment plants
  21. Using MFM methodology to generate and define major accident scenarios for quantitative risk assessment studies
  22. Monte Carlo Based Framework to Support HAZOP Study
  23. Assessing the environmental sustainability of early stage design for bioprocesses under uncertainties: An analysis of glycerol bioconversion
  24. Group-contribution based property estimation and uncertainty analysis for flammability-related properties
  25. Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems
  26. An integrated knowledge-based and optimization tool for the sustainable selection of wastewater treatment process concepts
  27. Modeling a production scale milk drying process: parameter estimation, uncertainty and sensitivity analysis
  28. Application of a mechanistic model as a tool for on-line monitoring of pilot scale filamentous fungal fermentation processes-The importance of evaporation effects
  29. A methodological approach to the design of optimising control strategies for sewer systems
  30. Working fluid selection for organic Rankine cycles – Impact of uncertainty of fluid properties
  31. Economic Risk Assessment of Early Stage Designs for Glycerol Valorization in Biorefinery Concepts
  32. A framework for techno-economic & environmental sustainability analysis by risk assessment for conceptual process evaluation
  33. Economic risk analysis and critical comparison of optimal biorefinery concepts
  34. Uncertainty analysis of the CPA and a quadrupolar CPA equation of state – With emphasis on CO2
  35. Controlling sewer systems – a critical review based on systems in three EU cities
  36. Systematic design of an optimal control system for the SHARON-Anammox process
  37. Functional unfold principal component regression methodology for analysis of industrial batch process data
  38. Optimal WWTP process selection for treatment of domestic wastewater – A realistic full-scale retrofitting study
  39. A Comprehensive Methodology for Development, Parameter Estimation, and Uncertainty Analysis of Group Contribution Based Property Models—An Application to the Heat of Combustion
  40. Mechanistic Models for Process Development and Optimization of Fed-batch Fermentation Systems
  41. Economic risk-based analysis: Effect of technical and market price uncertainties on the production of glycerol-based isobutanol
  42. Control of wastewater N2O emissions by balancing the microbial communities using a fuzzy-logic approach
  43. Synthesis of preliminary system designs for offshore oil and gas production
  44. Global sensitivity analysis of computer-aided molecular design problem for the development of novel working fluids for power cycles
  45. Early-Stage Design and Analysis of Biorefinery Networks
  46. Computer-aided modelling template: Concept and application
  47. Dynamic modeling and validation of a biomass hydrothermal pretreatment process-a demonstration scale study
  48. Aeration control by monitoring the microbiological activity using fuzzy logic diagnosis and control. Application to a complete autotrophic nitrogen removal reactor
  49. A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control
  50. Upgrading of lignocellulosic biorefinery to value-added chemicals: Sustainability and economics of bioethanol-derivatives
  51. Regulatory control analysis and design for sewer systems
  52. Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design
  53. A mathematical programming framework for early stage design of wastewater treatment plants
  54. A novel control strategy for single-stage autotrophic nitrogen removal in SBR
  55. Extending the benchmark simulation model n°2 with processes for nitrous oxide production and side-stream nitrogen removal
  56. A Framework for Sustainable Design of Algal Biorefineries: Economic Aspects and Life Cycle Analysis
  57. Multivariate Analysis of Industrial Scale Fermentation Data
  58. Optimal Design of Algae Biorefinery Processing Networks for the production of Protein, Ethanol and Biodiesel
  59. Optimization-based methodology for wastewater treatment plant synthesis – a full scale retrofitting case study
  60. Systematic network synthesis and design: Problem formulation, superstructure generation, data management and solution
  61. Sustainable Process Design under uncertainty analysis: targeting environmental indicators
  62. Methods and tools for sustainable chemical process design
  63. A comprehensive sensitivity and uncertainty analysis of a milk drying process
  64. Development of Computer Aided Modelling Templates for Model Re-use in Chemical and Biochemical Process and Product Design: Import and export of models
  65. Outlier treatment for improving parameter estimation of group contribution based models for upper flammability limit
  66. Validation of a functional model for integration of safety into process system design
  67. A computer-aided framework for development, identification and management of physiologically-based pharmacokinetic models
  68. Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions
  69. An integrated qualitative and quantitative modeling framework for computer-assisted HAZOP studies
  70. Development of novel control strategies for single-stage autotrophic nitrogen removal: A process oriented approach
  71. Effect of Market Price Uncertainties on the Design of Optimal Biorefinery Systems—A Systematic Approach
  72. Industrial Process Water Treatment and Reuse: A Framework for Synthesis and Design
  73. Influence of selecting secondary settling tank sub-models on the calibration of WWTP models – A global sensitivity analysis using BSM2
  74. A Dynamic Model for Cellulosic Biomass Hydrolysis: a Comprehensive Analysis and Validation of Hydrolysis and Product Inhibition Mechanisms
  75. Toward a Computer-Aided Synthesis and Design of Biorefinery Networks: Data Collection and Management Using a Generic Modeling Approach
  76. Superstructure Development and Optimization under Uncertainty for Design and Retrofit of Municipal Wastewater Treatment Plants
  77. Computer-Aided Template for Model Reuse, Development and Maintenance
  78. Uncertainty Analysis in Raw Material and Utility Cost of Biorefinery Synthesis and Design
  79. Financial Risk Analysis in the Synthesis and Design of Processing Networks
  80. A Framework for the Modelling of Biphasic Reacting Systems
  81. Hazard identification by extended multilevel flow modelling with function roles
  82. Application of the Generic Modelling Template Approach to Unsaturated Fatty Acid Oxidation and Crystallization Systems
  83. Modelling and ℒ1 adaptive control of temperature in biomass pretreatment
  84. Dynamic modeling and validation of a lignocellulosic enzymatic hydrolysis process – A demonstration scale study
  85. A systematic framework for enterprise-wide optimization: Synthesis and design of processing networks under uncertainty
  86. Self-optimising control of sewer systems
  87. Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes
  88. An operational protocol for facilitating start-up of single-stage autotrophic nitrogen-removing reactors based on process stoichiometry
  89. Process Systems Engineering, 1. Introduction
  90. A systematic framework for design of process monitoring and control (PAT) systems for crystallization processes
  91. First principles pharmacokinetic modeling: A quantitative study on Cyclosporin
  92. pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy
  93. Modelling and L1 adaptive control of pH in bioethanol enzymatic process
  94. A method to estimate the enthalpy of formation of organic compounds with chemical accuracy
  95. Control assessment for heat integrated systems. An industrial case study for ethanol recovery
  96. Calibration and validation of a model describing complete autotrophic nitrogen removal in a granular SBR system
  97. Use of continuous lactose fermentation for ethanol production by Kluveromyces marxianus for verification and extension of a biochemically structured model
  98. Synthesis and design of optimal biorefinery using an expanded network with thermochemical and biochemical biomass conversion platforms
  99. Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration
  100. A fuzzy-logic based diagnosis and control of a reactor performing complete autotrophic nitrogen removal
  101. Design of a Generic and Flexible Data Structure for Efficient Formulation of Large Scale Network Problems
  102. Computer-aided modeling framework – a generic modeling template for catalytic membrane fixed bed reactors
  103. Hazard Identification of the Offshore Three-Phase Separation Process Based on Multilevel Flow Modeling and HAZOP
  104. Experiences on dynamic simulation software in chemical engineering education
  105. Estimation of Environment-Related Properties of Chemicals for Design of Sustainable Processes: Development of Group-Contribution+(GC+) Property Models and Uncertainty Analysis
  106. Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics
  107. Process Systems Engineering, 2. Modeling and Simulation
  108. Process Systems Engineering, 7. Abnormal Events Management and Process Safety
  109. Systematic Multi-Scale Model Development Strategy for the Fragrance Spraying Process and Transport
  110. A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case
  111. Group-contribution+ (GC+) based estimation of properties of pure components: Improved property estimation and uncertainty analysis
  112. State-of-the-art and progress in the optimization-based simultaneous design and control for chemical processes
  113. Integrated business and engineering framework for synthesis and design of enterprise-wide processing networks
  114. Applying Mechanistic Models in Bioprocess Development
  115. The Solvent Selection framework
  116. Synthesis and Design of Processing Networks
  117. A simulation based engineering method to support HAZOP studies
  118. Sensitivity of Process Design due to Uncertainties in Property Estimates
  119. A systematic methodology for controller tuning in wastewater treatment plants
  120. Multivariate Principal Component Analysis and Case-Based Reasoning for monitoring, fault detection and diagnosis in a WWTP
  121. A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study
  122. Computer-Aided Modeling Framework for Efficient Model Development, Analysis, and Identification: Combustion and Reactor Modeling
  123. A generic multi-dimensional model-based system for batch cooling crystallization processes
  124. Application of the Morris method for screening the influential parameters of fuzzy controllers
  125. Wastewater Systems
  126. Systematic procedure for generating operational policies to achieve target crystal size distribution (CSD) in batch cooling crystallization
  127. A Mathematical Model for Simultaneous Saccharification and Co-fermentation (SSCF) of C6 and C5 Sugars
  128. Uncertainty and sensitivity analysis of filtration models for non-Fickian transport and hyperexponential deposition
  129. Building a multilevel modeling network for lipid processing systems
  130. Multienzyme-Catalyzed Processes: Next-Generation Biocatalysis
  131. Global sensitivity analysis in wastewater treatment plant model applications: Prioritizing sources of uncertainty
  132. Methodological Approach for Modeling of Multienzyme in-pot Processes
  133. A framework for model-based optimization of bioprocesses under uncertainty
  134. Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose
  135. Integration of Generic Multi-dimensional Model and Operational Policies for Batch Cooling Crystallization
  136. Application of computer-aided multi-scale modelling framework - Aerosol case study
  137. Lipid Processing Technology: Building a Multilevel Modeling Network
  138. A model-based methodology for simultaneous design and control of a bioethanol production process
  139. Assessing reliability of cellulose hydrolysis models to support biofuel process design—Identifiability and uncertainty analysis
  140. Modified calibration protocol evaluated in a model-based testing of SBR flexibility
  141. Application of mechanistic models to fermentation and biocatalysis for next-generation processes
  142. Systematic model development for partial nitrification of landfill leachate in a SBR
  143. A systematic approach for fine-tuning of fuzzy controllers applied to WWTPs
  144. Integration of process design and controller design for chemical processes using model-based methodology
  145. A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden
  146. Control of Process Operations and Monitoring of Product Qualities through Generic Model-based in Batch Cooling Crystallization
  147. A computer-aided framework for regression and multi-scale modelling needs in innovative product-process engineering
  148. Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems
  149. A computer-aided framework for systematic model development, analysis and identification in innovative product-process engineering
  150. Wastewater treatment modelling: dealing with uncertainties
  151. Good modeling practice for PAT applications: Propagation of input uncertainty and sensitivity analysis
  152. Uncertainty analysis in WWTP model applications: A critical discussion using an example from design
  153. Introducing mechanistic models in Process Analytical Technology education
  154. Comparison of the Modeling Approach between Membrane Bioreactor and Conventional Activated Sludge Processes
  155. Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1)
  156. Application of modeling and simulation tools for the evaluation of biocatalytic processes: A future perspective
  157. Improving the Morris method for sensitivity analysis by scaling the elementary effects
  158. Sensitivity Analysis of Non-Linear Dynamic Models: Prioritizing Experimental Research
  159. A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process
  160. A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation System with Recycle
  161. Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty
  162. Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts
  163. Matrix notation for efficient development offirst-principlesmodels within PAT applications: Integrated modeling of antibiotic production withStreptomyces coelicolor
  164. An efficient approach to automate the manual trial and error calibration of activated sludge models
  165. Combining multiway principal component analysis (MPCA) and clustering for efficient data mining of historical data sets of SBR processes
  166. Developing a framework for continuous use of models in daily management and operation of WWTPs: a life cycle approach
  167. Dynamic model development and validation for a nitrifying moving bed biofilter: Effect of temperature and influent load on the performance
  168. Wastewater Treatment Models
  169. Parameter subset selection for the dynamic calibration of AS models
  170. Model-based optimisation of the biological performance of a sidestream MBR
  171. Extensions to modeling aerobic carbon degradation using combined respirometric–titrimetric measurements in view of activated sludge model calibration
  172. Influence of Scaling and Unfolding in PCA Based Monitoring of Nutrient Removing Batch Process
  173. Simple modification to describe the soil water retention curve between saturation and oven dryness
  174. Reply to: Comment on “A critical comparison of systematic calibration protocols for activated sludge models: A SWOT analysis”
  175. Evaluation of the impacts of model-based operation of SBRs on activated sludge microbial community
  176. Evolution of an ASM2d-like model structure due to operational changes of an SBR process
  177. Model-based evaluation of an on-line control strategy for SBRs based on OUR and ORP measurements
  178. Application of a model-based optimisation methodology for nutrient removing SBRs leads to falsification of the model
  179. The Influence of Experimental Data Quality and Quantity on Parameter Estimation Accuracy
  180. A calibration methodology and model-based systems analysis for SBRs removing nutrients under limited aeration conditions
  181. INFLUENCE OF SCALING AND UNFOLDING IN PCA BASED MONITORING OF NUTRIENT REMOVING BATCH PROCESS
  182. A critical comparison of systematic calibration protocols for activated sludge models: A SWOT analysis
  183. A new approach for modelling simultaneous storage and growth processes for activated sludge systems under aerobic conditions
  184. Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes