Professor German F de la Fuente

All Stories

1. 
   Laser engineered architectures for magnetic flux manipulation on superconducting Nb thin films

   Article • Applied Surface Science, January 2025, Elsevier

   Professor German F de la Fuente

2. 
   Laser nanostructured metasurfaces in Nb superconducting thin films

   Article • Applied Surface Science, March 2024, Elsevier

   Professor German F de la Fuente

3. 
   Properties and antibacterial activity of MnFe2O4 nanoparticles obtained by pulsed laser ablation in liquid

   Article • Open Ceramics, March 2024, Elsevier

   Professor German F de la Fuente

4. 
   Grain Orientation, Angle of Incidence, and Beam Polarization Effects on Ultraviolet 300 ps‐Laser‐Induced Nanostructures on 316L Stainless Steel

   Article • Laser & Photonics Review, November 2023, Wiley

   Professor German F de la Fuente

5. 
   UV femtosecond laser cleaning of encrusted historical stained-glasses

   Article • Journal of Cultural Heritage, May 2023, Elsevier

   Professor German F de la Fuente

6. 
   Ultra-Short Pulse Laser Cleaning of Contaminated Pleistocene Bone: A Comprehensive Study on the Influence of Pulse Duration and Wavelength

   Article • Heritage, February 2023, MDPI AG

   Professor German F de la Fuente

7. 
   Chemical and Laser Cleaning of Corrosion Encrustations on Historical Stained Glass: A Comparative Study

   Article • Heritage, February 2023, MDPI AG

   Professor German F de la Fuente

8. 
   Use of Green Fs Lasers to Generate a Superhydrophobic Behavior in the Surface of Wind Turbine Blades

   Article • Polymers, December 2022, MDPI AG

   Professor German F de la Fuente

9. 
   Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

   Article • Nanomaterials, July 2022, MDPI AG

   Professor German F de la Fuente

10. 
    Transport and structural properties of MgB2/Fe wires produced by redesigning internal Mg diffusion process

    Article • Superconductor Science and Technology, March 2022, Institute of Physics Publishing

    Professor German F de la Fuente

11. 
    Historical stained-glass window laser preservation: The heat accumulation challenge

    Article • Boletín de la Sociedad Española de Cerámica y Vidrio, January 2022, Elsevier

    Professor German F de la Fuente

12. 
    Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study

    Article • SN Applied Sciences, November 2021, Springer Science + Business Media

    Professor German F de la Fuente

13. 
    Large enhancement of thermal conductance at ambient and cryogenic temperatures by laser remelting of plasma-sprayed Al2O3 coatings on Cu

    Article • Materials Research Bulletin, November 2021, Elsevier

    Professor German F de la Fuente

14. 
    Laser-induced scanning transfer deposition of silver electrodes on glass surfaces: A green and scalable technology

    Article • Applied Surface Science, August 2021, Elsevier

    Professor German F de la Fuente

15. 
    Improved Copper–Epoxy Adhesion by Laser Micro- and Nano-Structuring of Copper Surface for Thermal Applications

    Article • Polymers, May 2021, MDPI AG

    Professor German F de la Fuente

16. 
    Structure, magnetic, photocatalytic and blood compatibility studies of nickel nanoferrites prepared by laser ablation technique in distilled water

    Article • Journal of Alloys and Compounds, February 2021, Elsevier

    Professor German F de la Fuente

17. 
    Laser Floating Zone Growth: Overview, Singular Materials, Broad Applications, and Future Perspectives

    Article • Crystals, December 2020, MDPI AG

    Professor German F de la Fuente

18. 
    Surface Superconductivity Changes of Niobium Sheets by Femtosecond Laser-Induced Periodic Nanostructures

    Article • Nanomaterials, December 2020, MDPI AG

    Professor German F de la Fuente

19. 
    High speed processing of NiFe2O4 spinel using a laser furnace

    Article • Journal of Materiomics, December 2020, Elsevier

    Professor German F de la Fuente

20. 
    Can UV-C laser pulsed irradiation be used for the removal of organic micropollutants from water? Case study with ibuprofen

    Article • The Science of The Total Environment, November 2020, Elsevier

    Professor German F de la Fuente

21. 
    Laser-induced transient skin disruption to enhance cutaneous drug delivery

    Article • European Journal of Pharmaceutics and Biopharmaceutics, November 2020, Elsevier

    Professor German F de la Fuente

22. 
    Fabrication of cylindrical active GRIN media by laser-assisted radial dopant diffusion: A proof of concept

    Article • Results in Physics, June 2020, Elsevier

    Professor German F de la Fuente

23. 
    Effects of laser-induced periodic surface structures on the superconducting properties of Niobium

    Article • Applied Surface Science, April 2020, Elsevier

    Professor German F de la Fuente

24. 
    Effect of Syngas Composition on the Combustion and Emissions Characteristics of a Syngas/Diesel RCCI Engine

    Article • Energies, January 2020, MDPI AG

    Professor German F de la Fuente

25. 
    Simulation of salt spray corrosion behaviour of micro-arc oxidation coating by laser induced Ag infiltration

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Professor German F de la Fuente

26. 
    3D Organic Nanofabrics: Plasma-Assisted Synthesis and Antifreezing Behavior of Superhydrophobic and Lubricant-Infused Slippery Surfaces

    Article • Langmuir, November 2019, American Chemical Society (ACS)

    Dr Francisco Javier Aparicio Rebollo, Professor German F de la Fuente

27. 
    IR laser line scanning treatments to improve levitation forces in MgTi0.06B2 bulk materials

    Article • Journal of Alloys and Compounds, November 2019, Elsevier

    Professor German F de la Fuente

28. 
    Hydrophobicity, Freezing Delay, and Morphology of Laser-Treated Aluminum Surfaces

    Article • Langmuir, April 2019, American Chemical Society (ACS)

    Professor German F de la Fuente

29. 
    Nanoparticle formation and emission during laser ablation of ceramic tiles

    Article • Journal of Aerosol Science, December 2018, Elsevier

    Professor German F de la Fuente

30. 
    Laser‐induced coloration of ceramic tiles covered with magnetron sputtered precursor layers

    Article • Journal of the American Ceramic Society, September 2018, Wiley

    Professor German F de la Fuente

31. 
    Continuous processing of Bi2Sr2CaCu2O8+δ precursor powders

    Article • Ceramics International, August 2018, Elsevier

    Professor German F de la Fuente

32. 
    Microstructural characterization and tribological behavior of Laser Furnace processed ceramic tiles

    Article • Ceramics International, April 2018, Elsevier

    Professor German F de la Fuente

33. 
    Laser melting of glass

    Article • International Journal of Applied Glass Science, March 2017, Wiley

    Professor German F de la Fuente

34. 
    Laser Treatment of Nanoparticulated Metal Thin Films for Ceramic Tile Decoration

    Article • ACS Applied Materials & Interfaces, September 2016, American Chemical Society (ACS)

    Professor German F de la Fuente

35. 
    Metallization of ceramic substrates by laser induced decomposition of coordination complexes

    Article • Journal of the European Ceramic Society, September 2016, Elsevier

    Professor German F de la Fuente

36. 
    Process-generated nanoparticles from ceramic tile sintering: Emissions, exposure and environmental release

    Article • The Science of The Total Environment, September 2016, Elsevier

    Professor German F de la Fuente

37. 
    Laser Micromachining and Characterization of Metal-on-Glass High Density Pitch Adapters

    Article • Journal of Microelectromechanical Systems, October 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

38. 
    Ultrafine and nanoparticle formation and emission mechanisms during laser processing of ceramic materials

    Article • Journal of Aerosol Science, October 2015, Elsevier

    Professor German F de la Fuente

39. 
    “In situ” XPS studies of laser-induced surface nitridation and oxidation of tantalum

    Article • Journal of Materials Research, July 2015, Cambridge University Press

    Professor German F de la Fuente

40. 
    Effect of Laser Treatments on the Microstructure and Physical Properties of Bi-2212 and Gd-123 Bulk Samples

    Article • IEEE Transactions on Applied Superconductivity, June 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

41. 
    Transformation of Gold Nanorods in Liquid Media Induced by nIR, Visible, and UV Laser Irradiation

    Article • The Journal of Physical Chemistry C, May 2015, American Chemical Society (ACS)

    Professor German F de la Fuente

42. 
    In-situlaser synthesis of Nd–Al–O coatings: the role of sublattice cations in eutectic formation

    Article • Acta Crystallographica Section B Structural Science Crystal Engineering and Materials, February 2015, International Union of Crystallography

    Dr Angel Vegas, Professor German F de la Fuente

43. 
    Continuous-Mode Laser Ablation at the Solid–Liquid Interface of Pelletized Low-Cost Materials for the Production of Luminescent Silicon Carbide Nanocrystals

    Article • The Journal of Physical Chemistry C, January 2015, American Chemical Society (ACS)

    Professor German F de la Fuente

44. 
    Workplace Exposure to Process-Generated Ultrafine and Nanoparticles in Ceramic Processes Using Laser Technology

    Article • January 2015, Springer Science + Business Media

    Professor German F de la Fuente

45. 
    Microstructure of planar glass substrates modified by Laser Ablation Backwriting (LAB) of metal targets

    Article • Applied Surface Science, July 2014, Elsevier

    Professor German F de la Fuente

46. 
    Metallic coatings obtained by Pulsed Laser Deposition through a dynamic prism system

    Article • May 2014, SPIE

    Professor German F de la Fuente

47. 
    Fabrication of high-density pitch adapters by laser ablation

    Article • May 2014, SPIE

    Professor German F de la Fuente

48. 
    High speed inscription of uniform, large-area laser-induced periodic surface structures in Cr films using a high repetition rate fs laser

    Article • Optics Letters, April 2014, Optical Society of America (OSA)

    Professor German F de la Fuente

49. 
    ZIF-8 micromembranes for gas separation prepared on laser-perforated brass supports

    Article • Journal of Materials Chemistry A, January 2014, Royal Society of Chemistry

    Professor German F de la Fuente

50. 
    Planar step-index waveguides obtained via sol–gel synthesis from organometallic precursors

    Article • Journal of Sol-Gel Science and Technology, August 2013, Springer Science + Business Media

    Professor German F de la Fuente

51. 
    Fabrication of Metal-on-Glass High-Pitch Adapters Between VLSI Electronics and Semiconductor Sensors by Laser Ablation

    Article • Journal of Lightwave Technology, July 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

52. 
    ‘Laser chemistry’ synthesis, physicochemical properties, and chemical processing of nanostructured carbon foams

    Article • Nanoscale Research Letters, May 2013, Springer Science + Business Media

    Professor German F de la Fuente

53. 
    The laser furnace: A revolution in ceramics and glass processing?

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

54. 
    Large area, high speed inscription of laser-induced periodic surface structures (LIPSS) in Cr using a high repetition rate fs-laser

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

55. 
    Synthesis and application of gold-carbon hybrids as catalysts for the hydroamination of alkynes

    Article • Applied Catalysis A General, April 2013, Elsevier

    Professor German F de la Fuente

56. 
    Microstructure and Transport Properties of Bi-2212 Prepared by CO2 Laser Line Scanning

    Article • Journal of Superconductivity and Novel Magnetism, December 2012, Springer Science + Business Media

    Professor German F de la Fuente

57. 
    Structural and optical characterization of ZrO2:CeO2 slab waveguides obtained via sol–gel

    Article • Optical Materials, December 2012, Elsevier

    Dr Gualtiero Nunzi Conti , dr. Giancarlo C. Righini, Professor German F de la Fuente

58. 
    Laser synthesis and luminescence properties of SrAl2O4:Eu2+, Dy3+ phosphors

    Article • Journal of the European Ceramic Society, December 2012, Elsevier

    Professor German F de la Fuente

59. 
    Laser-assisted production of Bi-doped silica glasses

    Article • Materials Letters, October 2012, Elsevier

    Professor German F de la Fuente

60. 
    A new pulsed laser deposition technique: Scanning multi-component pulsed laser deposition method

    Article • Review of Scientific Instruments, April 2012, American Institute of Physics

    Professor German F de la Fuente

61. 
    Laser Control of Zeolite Nucleation

    Article • ChemPhysChem, January 2012, Wiley

    Professor German F de la Fuente

62. 
    In-situ laser synthesis of rare earth aluminate coatings in the system Ln-Al-O (Ln = Y, Gd)

    Article • Solid State Sciences, September 2011, Elsevier

    Professor German F de la Fuente

63. 
    Laser Engraving of Ceramic Tiles

    Article • International Journal of Applied Ceramic Technology, September 2011, Wiley

    Professor German F de la Fuente

64. 
    Sol–gel coatings: An alternative route for producing planar optical waveguides

    Article • Thin Solid Films, September 2011, Elsevier

    Professor German F de la Fuente

65. 
    Characterization of planar waveguides fabricated by multiple sol-gel dip-coatings

    Article • August 2011, SPIE

    Dr Gualtiero Nunzi Conti , dr. Giancarlo C. Righini, Professor German F de la Fuente

66. 
    Changes in the Thermal Stability of 2G HTS Wires by Local Modification of the Stabilization Layer

    Article • IEEE Transactions on Applied Superconductivity, June 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

67. 
    Laser-assisted, crack-free surface melting of large eutectic ceramic bodies

    Article • Journal of the European Ceramic Society, June 2011, Elsevier

    Professor German F de la Fuente

68. 
    Beam transformations by active GRIN materials

    Article • May 2011, SPIE

    Professor German F de la Fuente

69. 
    Structural and optical characterisation of planar waveguides obtained via Sol-Gel

    Article • May 2011, SPIE

    Professor German F de la Fuente

70. 
    Dichroic Optical Structures: Selective Dichroic Patterning by Nanosecond Laser Treatment of Ag Nanostripes (Adv. Mater. 7/2011)

    Article • Advanced Materials, February 2011, Wiley

    Professor German F de la Fuente

71. 
    Propagation of Gaussian Beams through Active GRIN Materials

    Article • Journal of Physics Conference Series, January 2011, Institute of Physics Publishing

    Professor German F de la Fuente

72. 
    Selective Dichroic Patterning by Nanosecond Laser Treatment of Ag Nanostripes

    Article • Advanced Materials, December 2010, Wiley

    Professor German F de la Fuente

73. 
    Tailored production of nanostructured metal/carbon foam by laser ablation of selected organometallic precursors

    Article • Carbon, May 2010, Elsevier

    Professor German F de la Fuente

74. 
    Influence of Thermal Effects Produced by Laser Treatment on the Tribological Behavior of Porcelain Ceramic Tiles

    Article • Key Engineering Materials, December 2009, Trans Tech Publications

    Professor German F de la Fuente

75. 
    Laser Induced Cylindrical Zone Melting of Bi2Sr2CaCu2O8+∂ Superconductors 

    Article • Zeitschrift für anorganische und allgemeine Chemie, October 2009, Wiley

    Professor German F de la Fuente

76. 
    Fabrication of Superconducting Coatings on Structural Ceramic Tiles

    Article • IEEE Transactions on Applied Superconductivity, June 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

77. 
    Phase diffractive optical gratings on glass substrates by laser ablation

    Article • Optics Communications, March 2009, Elsevier

    Professor German F de la Fuente

78. 
    Preparation and application of silicalite-1 micromembranes on laser-perforated stainless steel sheets

    Article • Journal of Membrane Science, May 2008, Elsevier

    Professor Jesus Santamaria, Professor German F de la Fuente

79. 
    “in situ” XPS studies of laser induced surface cleaning and nitridation of Ti

    Article • Surface and Coatings Technology, January 2008, Elsevier

    Professor German F de la Fuente

80. 
    Waveguide formation by laser backwriting ablation of metals unto glass substrates

    Article • January 2008, American Institute of Physics

    Professor German F de la Fuente

81. 
    In situ synthesis of composite MTiO3–Al2O3 coatings via laser zone melting

    Article • Solid State Sciences, May 2007, Elsevier

    Professor German F de la Fuente

82. 
    Laser backwriting process on glass via ablation of metal targets

    Article • Optics Communications, May 2007, Elsevier

    Professor German F de la Fuente

83. 
    Growth of Silicalite-1 by a Method Involving Separation of Reactants

    Article • Chemistry of Materials, February 2007, American Chemical Society (ACS)

    Professor Jesus Santamaria, Professor German F de la Fuente

84. 
    Ferromagnetism in Twinned Pt Nanoparticles Obtained by Laser Ablation

    Article • Chemistry of Materials, January 2007, American Chemical Society (ACS)

    Professor German F de la Fuente

85. 
    Laser technologies applied to the fabrication and characterization of bulk Bi‐2212 superconducting materials for power applications

    Article • phys stat sol (a), August 2006, Wiley

    Professor German F de la Fuente

86. 
    Temperature dependence of laser backwriting process on glass

    Article • April 2006, SPIE

    Professor German F de la Fuente

87. 
    Gold/carbon nanocomposite foam

    Article • Chemical Physics Letters, March 2006, Elsevier

    Professor German F de la Fuente

88. 
    Refractive index modification in glass by laser backwriting ablation of metals

    Article • Optics Express, January 2006, Optical Society of America (OSA)

    Professor German F de la Fuente

89. 
    Laser backwriting process on glass via ablation of metal targets

    Article • September 2005, SPIE

    Professor German F de la Fuente

90. 
    Ag distribution in thick Bi-2212 floating zone textured rods

    Article • Journal of the European Ceramic Society, January 2005, Elsevier

    Professor German F de la Fuente

91. 
    Laser Zone Melting and Texture Formation in MgO‐doped Bi2.03Sr1.93Ca1.07Cu2.05O8+δ

    Article • Zeitschrift für anorganische und allgemeine Chemie, October 2004, Wiley

    Professor German F de la Fuente

92. 
    Preparation of Silicalite-1 Micromembranes on Laser-Perforated Stainless Steel Sheets

    Article • Chemistry of Materials, October 2004, American Chemical Society (ACS)

    Professor German F de la Fuente

93. 
    The influence of support temperature on Bi-2212 monoliths textured by diode laser zone melting

    Article • Superconductor Science and Technology, August 2004, Institute of Physics Publishing

    Professor German F de la Fuente

94. 
    Laser zone melted Bi2Sr2CaCu2O8+ thick films on (100) MgO substrate

    Article • Superconductor Science and Technology, July 2004, Institute of Physics Publishing

    Professor German F de la Fuente

95. 
    Laser textured Bi-2212 in planar geometries

    Article • IEEE Transactions on Applied Superconductivity, June 2003, Institute of Electrical & Electronics Engineers (IEEE)

    Professor German F de la Fuente

96. 
    Evolution of multiwalled carbon-nanotube/SiO2composites via laser treatment

    Article • Nanotechnology, January 2003, Institute of Physics Publishing

    Professor German F de la Fuente

97. 
    ZrO2–Al2O3 eutectic plates produced by laser zone melting

    Article • Journal of the European Ceramic Society, February 2002, Elsevier

    Professor German F de la Fuente

98. 
    Microstructure of Y2O3 doped Al2O3–ZrO2 eutectics grown by the laser floating zone method

    Article • Journal of the European Ceramic Society, January 2002, Elsevier

    Professor German F de la Fuente

99. 
    Study of parameters important for the growth of single wall carbon nanotubes

    Article • Optical Materials, June 2001, Elsevier

    Professor German F de la Fuente

100. 
     Production of carbon nanotubes by CO2-laser evaporation of various carbonaceous feedstock materials

     Article • Nanotechnology, May 2001, Institute of Physics Publishing

     Professor German F de la Fuente

101. 
     Diameter dependence of Raman intensities for single-wall carbon nanotubes

     Article • Physical Review B, March 2001, American Physical Society (APS)

     Professor German F de la Fuente

102. 
     The influence of the target composition in the structural characteristics of single-walled carbon nanotubes produced by laser ablation

     Article • Synthetic Metals, March 2001, Elsevier

     Professor German F de la Fuente

103. 
     Microstructural development of the La0.5Li0.5TiO3 lithium ion conductor processed by the laser floating zone (LFZ) method

     Article • Journal of Materials Chemistry, January 2001, Royal Society of Chemistry

     Professor German F de la Fuente

104. 
     Diameter distribution of single wall carbon nanotubes in nanobundles

     Article • Zeitschrift für Physik B Condensed Matter and Quanta, November 2000, Springer Science + Business Media

     Professor German F de la Fuente

105. 
     Precursor powder influence on melt processing of high critical current BSCCO rods

     Article • Superconductor Science and Technology, July 2000, Institute of Physics Publishing

     Professor German F de la Fuente

106. 
     Phase growth and microstructure modifications induced by annealing in highly textured superconducting Bi-2212 thin rods

     Article • Journal of Materials Research, March 2000, Springer Science + Business Media

     Professor German F de la Fuente

107. 
     Single-walled carbon nanotubes formation with a continuous CO 2 -laser: experiments and theory

     Article • Applied Physics A, February 2000, Springer Science + Business Media

     Professor German F de la Fuente

108. 
     Single-walled carbon nanotubes produced by cw CO 2 -laser ablation: study of parameters important for their formation

     Article • Applied Physics A, February 2000, Springer Science + Business Media

     Professor German F de la Fuente

109. 
     Gas and pressure effects on the production of single-walled carbon nanotubes by laser ablation

     Article • Carbon, January 2000, Elsevier

     Professor German F de la Fuente

110. 
     Development of Ag sheathed Bi-2223 multifilamentary tapes with MgO coated filaments

     Article • IEEE Transactions on Applied Superconductivity, June 1999, Institute of Electrical & Electronics Engineers (IEEE)

     Professor German F de la Fuente

111. 
     Raman characterization of singlewalled carbon nanotubes and PMMA-nanotubes composites

     Article • Synthetic Metals, June 1999, Elsevier

     Professor German F de la Fuente

112. 
     Single-walled carbon nanotubes produced by laser ablation under different inert atmospheres

     Article • Synthetic Metals, June 1999, Elsevier

     Professor German F de la Fuente

113. 
     Electrical AC loss measurements of Bi-2223 tapes, performed under the Brite EuRam Research programme SACPA

     Article • Physica C Superconductivity, December 1998, Elsevier

     Professor German F de la Fuente

114. 
     Raman Investigation of Singlewalled Carbon Nanotubes

     Article • Molecular Crystals and Liquid Crystals Science and Technology Section A Molecular Crystals and Liquid Crystals, November 1998, Taylor & Francis

     Professor German F de la Fuente

115. 
     Production of high-density single-walled nanotube material by a simple laser-ablation method

     Article • Chemical Physics Letters, August 1998, Elsevier

     Professor German F de la Fuente

116. 
     A series of round-robin measurements of the self-field ac loss of Bi-2223 tapes

     Article • Superconductor Science and Technology, July 1998, Institute of Physics Publishing

     Professor German F de la Fuente

117. 
     Growth rate effects on thin Bi2Sr2CaCu2O8+ textured rods

     Article • Physica C Superconductivity, June 1998, Elsevier

     Professor German F de la Fuente

118. 
     Coatings of metal substrates assisted by laser radiation

     Article • Revista de Metalurgia, April 1998, Departmento de Publicaciones del CSIC

     Professor German F de la Fuente

119. 
     Properties of ceramic oxides processed by laser

     Article • Revista de Metalurgia, April 1998, Departmento de Publicaciones del CSIC

     Professor German F de la Fuente

120. 
     High T<sub>c</sub> superconducting current leads laser fabrication

     Article • Revista de Metalurgia, April 1998, Departmento de Publicaciones del CSIC

     Professor German F de la Fuente

121. 
     Processing of textured BSCCO superconductors by laser-induced directional solidification

     Article • Superconductor Science and Technology, January 1998, Institute of Physics Publishing

     Professor German F de la Fuente

122. 
     Structures of soot generated by laser induced pyrolysis of metal-graphite composite targets

     Article • Carbon, January 1998, Elsevier

     Professor German F de la Fuente

123. 
     Luminescence properties ofZrO2−CaOeutectic crystals with ordered lamellar microstructure activated withEr3+ions

     Article • November 1997, American Physical Society (APS)

     Dr Jose A. Pardo, Professor German F de la Fuente

124. 
     Advances towards the rolling processing of long BSCCO tapes

     Article • IEEE Transactions on Applied Superconductivity, June 1997, Institute of Electrical & Electronics Engineers (IEEE)

     Professor German F de la Fuente

125. 
     Article • Journal of Materials Science, January 1997, Springer Science + Business Media

     Professor German F de la Fuente

126. 
     Aligned ZrO2(c)‐CaZrO3 eutectics grown by the laser floating zone method: Electrical and optical properties

     Article • Advanced Materials, November 1996, Wiley

     Professor German F de la Fuente

127. 
     Flux pinning improvement in Bi-2212 silver sheathed tapes with submicron SrZrO3 inclusions

     Article • Physica C Superconductivity, November 1995, Elsevier

     Professor German F de la Fuente

128. 
     Wavelength dependance in laser floating zone processing. A case study with bi‐SR‐CA‐CU‐O superconductors*

     Article • Advanced Materials, October 1995, Wiley

     Professor German F de la Fuente

129. 
     Formation and stability of the 2223 phase in high-JcAg-sheathed (Bi,Pb)2Sr2Ca2Cu3O10+ deltatapes

     Article • Superconductor Science and Technology, October 1994, Institute of Physics Publishing

     Professor German F de la Fuente

130. 
     Superconducting composite wires and tapes

     Article • Applied Superconductivity, June 1994, Elsevier

     Professor German F de la Fuente

131. 
     On the origin of magnetic AC susceptibility non-SRT anomalies in intermetallic compounds

     Article • IEEE Transactions on Magnetics, March 1994, Institute of Electrical & Electronics Engineers (IEEE)

     Professor German F de la Fuente

132. 
     Microstructure, interfaces and magnetic behaviour of thick Ag/BSCCO composite fibres

     Article • Physica C Superconductivity, February 1994, Elsevier

     Professor German F de la Fuente

133. 
     Microstructure of laser floating zone (LFZ) textured (Bi, Pb)SrCaCuO superconductor composites

     Article • Materials Science and Engineering A, December 1993, Elsevier

     Professor German F de la Fuente

134. 
     Polymer-matrix route to (Bi, Pb)2Sr2Ca2Cu3O10+δ: The role of Ca2CuO3☆

     Article • Solid State Ionics, November 1993, Elsevier

     Professor German F de la Fuente

135. 
     Ag/(Bi, Pb)-Sr-Ca-Cu-O superconducting tape processing: Solid state chemistry aspects

     Article • Solid State Ionics, September 1993, Elsevier

     Professor German F de la Fuente

136. 
     Stoichiometry variation effect on the superconducting properties of polymer-processed (Bi1-xPbx)2Sr2Ca2Cu3O10 ceramics

     Article • Solid State Ionics, September 1993, Elsevier

     Professor German F de la Fuente

137. 
     Solution-based synthesis routes to (Bi1−xPbx)2Sr2Ca2Cu3O10+δ

     Article • Journal of Materials Research, June 1993, Springer Science + Business Media

     Professor German F de la Fuente

138. 
     Novel polymer solution synthesis of the 110 K superconducting phase in the bismuth system

     Article • Chemistry of Materials, June 1993, American Chemical Society (ACS)

     Professor German F de la Fuente

139. 
     THE SYNTHESIS AND CHARACTERIZATION OF MIXED (ALKYLAMINO) AND (ARYLAMINO)PHENYLPHOSPHONIUM COMPOUNDS

     Article • Phosphorus Sulfur and Silicon and the Related Elements, May 1993, Taylor & Francis

     Professor German F de la Fuente

140. 
     THE SYNTHESIS AND CHARACTERIZATION OF TETRAKIS(ALKYLAMINO)PHOSPHONIUM COMPOUNDS1

     Article • Phosphorus Sulfur and Silicon and the Related Elements, May 1993, Taylor & Francis

     Professor German F de la Fuente

141. 
     Fabrication of Ag/(Bi,Pb)SrCaCuO superconducting tapes

     Article • Cryogenics, January 1993, Elsevier

     Professor German F de la Fuente

142. 
     Laser floating zone growth of textured Ag/(Bi,Pb)SrCaCuO superconductors

     Article • Advanced Materials, July 1992, Wiley

     Professor German F de la Fuente

143. 
     Microstructure of (Bi,Pb)-Sr-Ca-Cu-O fibres

     Article • Physica C Superconductivity, July 1992, Elsevier

     Professor German F de la Fuente

144. 
     Magnetic and electric transport properties of Ag/(Bi,Pb)SrCaCuO superconducting fibres

     Article • Cryogenics, January 1992, Elsevier

     Professor German F de la Fuente

145. 
     (Bi,Pb)2Sr2Ca2Cu3O10+δ superconductor composites: Ceramics vs. fibers

     Article • Physica C Superconductivity, December 1991, Elsevier

     Professor German F de la Fuente

146. 
     Polymer solution processing of (Bi, Pb)SrCaCuO

     Article • Physica C Superconductivity, December 1991, Elsevier

     Professor German F de la Fuente

147. 
     LFZ growth of (Bi, Pb)–Sr–Ca–Cu–O superconducting fibers

     Article • Journal of Materials Research, April 1991, Springer Science + Business Media

     Professor German F de la Fuente

148. 
     Anisotropy in the diamagnetic properties of oriented Bi2Sr2CaCu2O8+δ polycrystalline fibers

     Article • Solid State Communications, December 1989, Elsevier

     Professor German F de la Fuente

149. 
     Growth and characterization of the spectra of EuAlO_3:Ti and GdAIO_3:Ti

     Article • Journal of the Optical Society of America B, December 1989, Optical Society of America (OSA)

     Professor German F de la Fuente

150. 
     Laser Heated Pedestal Growth Of Nd-Doped Oxide Crystals For Diode Pumping

     Article • September 1989, SPIE

     Professor German F de la Fuente

151. 
     Laser Floating Zone growth of (Bi,Pb)-Sr-Ca-Cu-O (2223) phase superconductor cylinders.

     Article • Frontiers in Human Neuroscience, September 1989, American Institute of Physics

     Professor German F de la Fuente

152. 
     Crystal fibers of BiSrCaCuO materials grown by the laser floating zone method

     Article • Journal of the Less Common Metals, May 1989, Elsevier

     Professor German F de la Fuente

153. 
     Growth of Nd-doped rare earth silicates by the laser floating zone method

     Article • Solid State Ionics, February 1989, Elsevier

     Professor German F de la Fuente

154. 
     Two safety improvements for a standard experiment on the boiling point-composition diagram of a binary system

     Article • Journal of Chemical Education, February 1982, American Chemical Society (ACS)

     Professor German F de la Fuente