All Stories

  1. Low tortuous permeable concrete pavement material: A new approach to improve physical properties

    Article • Cleaner Engineering and Technology, June 2024, Elsevier

    Prof. G M Sadiqul Islam

  2. Geopolymer using different size fractions of recycled brick-based mixed demolition waste

    Article • Cleaner Materials, March 2024, Elsevier

    Prof. G M Sadiqul Islam

  3. Geopolymer-Based Building Blocks Using Construction and Demolition Waste

    Article • January 2024, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  4. Optimization of Particle Packing Density of Industrial Wastes Incorporated Concrete

    Article • January 2024, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  5. Efficacy of Bacillus Cereus Bacteria in Improving Concrete Properties through Bio-precipitation

    Article • Iranian Journal of Science and Technology Transactions of Civil Engineering, July 2023, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  6. Potential of ladle furnace slag as supplementary cementitious material in concrete

    Article • Case Studies in Construction Materials, July 2023, Elsevier

    Prof. G M Sadiqul Islam

  7. Using Jute Fiber to Improve Fresh and Hardened Properties of Concrete

    Article • Journal of Natural Fibers, April 2023, Taylor & Francis

    Prof. G M Sadiqul Islam

  8. Service life and environmental performance simulation of concrete structure using SCMs as partial replacement of OPC

    Article • January 2023, American Institute of Physics

    Prof. G M Sadiqul Islam, Jushan Abdullah Babar

  9. Ionizing radiation shielding efficacy of common mortar and concrete used in Bangladeshi dwellings

    Article • Case Studies in Construction Materials, December 2022, Elsevier

    Prof. G M Sadiqul Islam, Dr Mayeen U Khandaker

  10. Performance of Ladle Furnace Slag in Mortar under Standard and Accelerated Curing

    Article • Advances in Civil Engineering, October 2022, Hindawi Publishing Corporation

    Prof. G M Sadiqul Islam

  11. Sustainable high-performance, self-compacting concrete using ladle slag

    Article • Cleaner Engineering and Technology, April 2022, Elsevier

    Prof. G M Sadiqul Islam

  12. Ternary combined industrial wastes for non-fired brick

    Article • Australian Journal of Structural Engineering, February 2022, Taylor & Francis

    Prof. G M Sadiqul Islam

  13. Injection-molded natural fiber-reinforced polymer composites–a review

    Article • International Journal of Mechanical and Materials Engineering, November 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  14. Slag and Silica Fume-Based Geopolymer Mortar Using Locally Available Waste Filler Materials

    Article • October 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  15. Early Age and Long-term Mechanical Performance of Mortars Incorporating High-volume GGBS

    Article • October 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  16. Ternary Combination of Industrial Wastes for Sustainable Geopolymer Mortars

    Article • October 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  17. Effect of Compaction Pressure on the Properties of Eco-Friendly Building Block Produced from Industrial By-Products

    Article • October 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  18. Influence of Activator and Superplasticizer on Fly Ash-Based Geopolymer Paste and Mortar

    Article • October 2021, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  19. U-shaped ferrocement wrapping with inter-surface locking for flexural strengthening of RC beam

    Article • Australian Journal of Structural Engineering, January 2020, Taylor & Francis

    Prof. G M Sadiqul Islam

  20. Bond Strength of Fusion Bonded Epoxy-Coated Reinforcement in Concrete

    Article • Journal of the Civil Engineering Forum, September 2019, Universitas Gadjah Mada

    Prof. G M Sadiqul Islam

  21. FLEXURAL CAPACITY ASSESSMENT OF BRICK AGGREGATED PRE-CRACKED RC BEAM STRENGTHENED WITH CARBON FIBER POLYMER

    Article • Malaysian Journal of Civil Engineering, April 2019, Penerbit UTM Press

    Prof. G M Sadiqul Islam

  22. Effect of retarding superplasticizers on the properties of cement paste, mortar and concrete

    Article • Asian Journal of Civil Engineering, February 2019, Springer Science + Business Media

    Prof. G M Sadiqul Islam

  23. Pre-cracked RC beam strengthening with CFRP materials

    Article • January 2018, the Institution of Engineering and Technology (the IET)

    Prof. G M Sadiqul Islam

  24. Waste glass powder as partial replacement of cement for sustainable concrete practice

    Article • International Journal of Sustainable Built Environment, June 2017, Elsevier

    Prof. G M Sadiqul Islam

  25. Effect of Phosphogypsum on the Properties of Portland Cement

    Article • Procedia Engineering, January 2017, Elsevier

    Prof. G M Sadiqul Islam

  26. Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete

    Article • International Journal of Sustainable Built Environment, December 2016, Elsevier

    Prof. G M Sadiqul Islam

  27. Influence of Portland cement characteristics on air-entrainment in fly ash concrete

    Article • Magazine of Concrete Research, July 2015, ICE Publishing

    Prof. G M Sadiqul Islam

  28. Discussion: Difference in pozzolanic behaviour of Tunisian clays with lime and cement

    Article • Advances in Cement Research, April 2013, ICE Publishing

    Prof. G M Sadiqul Islam

  29. Refining the foam index test for use with air-entrained fly ash concrete

    Article • Magazine of Concrete Research, November 2012, ICE Publishing

    Prof. G M Sadiqul Islam

  30. Colorimetric evaluation of admixture adsorption by fly ash for use in air-entrained concrete

    Article • Materials and Structures, August 2012, Springer Science + Business Media

    Prof. G M Sadiqul Islam