All Stories

  1. Thermal transformations of glass in anorthite composition

    Article • January 2021, American Institute of Physics

    Frantisek Lukac

  2. An ultrasonic study of relaxation processes in pure and mechanically alloyed tungsten

    Article • International Journal of Refractory Metals and Hard Materials, August 2020, Elsevier

    Frantisek Lukac

  3. Microstructure of the novel biomedical Mg–4Y–3Nd alloy prepared by spark plasma sintering

    Article • Journal of Alloys and Compounds, April 2020, Elsevier

    Frantisek Lukac, Robert Král

  4. Effect of flake-like powder morphology on the microstructure and texture in Mg-Al-RE alloy

    Article • Materials Letters, March 2020, Elsevier

    Frantisek Lukac, Robert Král

  5. Behavior of Positrons in the HfNbTaTiZr Complex Concentrated Alloy

    Article • Acta Physica Polonica A, February 2020, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  6. Defects in Thin Layers of High Entropy Alloy HfNbTaTiZr

    Article • Acta Physica Polonica A, February 2020, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  7. Microstructure and Nanoscopic Porosity in Black Pd Films

    Article • Acta Physica Polonica A, February 2020, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  8. Quenched-in Vacancies and Hardening of Fe-Al Intermetallics

    Article • Acta Physica Polonica A, February 2020, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  9. Effect of Ti addition on microstructure and corrosion properties of laser cladded WC-Co/NiCrBSi(Ti) coatings

    Article • Applied Surface Science, February 2020, Elsevier

    Frantisek Lukac

  10. Microstructures and Thermal Cycling Properties of Thermal Barrier Coatings Deposited by Hybrid Water-Stabilized Plasma Torch

    Article • Journal of Thermal Spray Technology, February 2020, Springer Science + Business Media

    Frantisek Lukac

  11. Influence of Glass Additions on Illitic Clay Ceramics

    Article • Materials, January 2020, MDPI AG

    Mr Andrei Shishkin, Frantisek Lukac

  12. Mechanical properties of illite‐based ceramics with controlled porosity studied by modern in situ techniques

    Article • Journal of the American Ceramic Society, December 2019, Wiley

    Frantisek Lukac

  13. Microstructure and Mechanical Properties of Sintered and Heat-Treated HfNbTaTiZr High Entropy Alloy

    Article • Metals, December 2019, MDPI AG

    Dr Jakub Cizek, Frantisek Lukac

  14. Cold Sprayed Tungsten Armor for Tokamak First Wall

    Article • Coatings, December 2019, MDPI AG

    Frantisek Lukac

  15. The Effect of Processing Route on Properties of HfNbTaTiZr High Entropy Alloy

    Article • Materials, December 2019, MDPI AG

    Dr Jakub Cizek, Frantisek Lukac

  16. Erratum to “Kinetic analysis of sinter-crystallization of mullite and cristobalite from kaolinite” [Thermochim. Acta 678 (2019) 178312]

    Article • Thermochimica Acta, December 2019, Elsevier

    Frantisek Lukac

  17. Solution Precursor Plasma Spraying of Cr-Doped Al2O3 Thermochromic Coatings

    Article • Journal of Thermal Spray Technology, November 2019, Springer Science + Business Media

    Frantisek Lukac

  18. Effect of the High-Pressure Torsion (HPT) and Subsequent Isothermal Annealing on the Phase Transformation in Biomedical Ti15Mo Alloy

    Article • Metals, November 2019, MDPI AG

    Frantisek Lukac

  19. Annealing Effects in Cast Commercial Aluminium Al–Mg–Zn–Cu(–Sc–Zr) Alloys

    Article • Metals and Materials International, October 2019, Springer Science + Business Media

    Frantisek Lukac

  20. Improvement of Mechanical Properties of Plasma Sprayed Al2O3-ZrO2-SiO2 Amorphous Coatings by Surface Crystallization

    Article • Materials, October 2019, MDPI AG

    Frantisek Lukac

  21. Electrical conductivity and thermal analyses studies of phase evolution in the illite – CaCO3 system

    Article • Applied Clay Science, September 2019, Elsevier

    Frantisek Lukac

  22. Thermal and Oxidation Behavior of CoCrFeMnNi Alloy with and Without Yttrium Oxide Particle Dispersion

    Article • Journal of Materials Engineering and Performance, September 2019, Springer Science + Business Media

    Frantisek Lukac

  23. On the Structural and Chemical Homogeneity of Spark Plasma Sintered Tungsten

    Article • Metals, August 2019, MDPI AG

    Frantisek Lukac, Dr. Jiri Matejicek

  24. Increasing α-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts

    Article • Surface and Coatings Technology, August 2019, Elsevier

    Frantisek Lukac

  25. Kinetic analysis of sinter-crystallization of mullite and cristobalite from kaolinite

    Article • Thermochimica Acta, August 2019, Elsevier

    Frantisek Lukac

  26. Lattice defects in severely deformed biomedical Ti-6Al-7Nb alloy and thermal stability of its ultra-fine grained microstructure

    Article • Journal of Alloys and Compounds, February 2019, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  27. Characterization of less common nitrides as potential permeation barriers

    Article • Fusion Engineering and Design, February 2019, Elsevier

    Frantisek Lukac, Dr. Jiri Matejicek

  28. Controlling the carbide formation and chromium depletion in W-Cr alloy during field assisted sintering

    Article • International Journal of Refractory Metals and Hard Materials, February 2019, Elsevier

    Frantisek Lukac

  29. Microstructure and Room Temperature Mechanical Properties of Different 3 and 4 Element Medium Entropy Alloys from HfNbTaTiZr System

    Article • Entropy, January 2019, MDPI AG

    Dr Jakub Cizek, Frantisek Lukac

  30. Porosity in Ce4+ and Mg2+ doped zirconia nanomaterials

    Article • January 2019, American Institute of Physics

    Frantisek Lukac

  31. Defects in the high entropy alloy HfNbTaTiZr prepared by spark plasma sintering

    Article • January 2019, American Institute of Physics

    Frantisek Lukac, Dr Jakub Cizek

  32. Non-isothermal kinetic analysis of spinel phase crystallization from metakaolinite

    Article • January 2019, American Institute of Physics

    Frantisek Lukac

  33. Strength enhancement of high entropy alloy HfNbTaTiZr by severe plastic deformation

    Article • Journal of Alloys and Compounds, November 2018, Elsevier

    Robert Král, Frantisek Lukac

  34. High-temperature corrosion behavior of selected thermally sprayed coatings in corrosive aggressive environment

    Article • Materials Research Express, October 2018, Institute of Physics Publishing

    Frantisek Lukac

  35. Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying

    Article • Journal of Thermal Spray Technology, October 2018, Springer Science + Business Media

    Frantisek Lukac

  36. Spark plasma sintering of gas atomized high-entropy alloy HfNbTaTiZr

    Article • Journal of Materials Research, September 2018, Cambridge University Press

    Frantisek Lukac

  37. Defects in High Entropy Alloy HfNbTaTiZr Prepared by High Pressure Torsion

    Article • Acta Physica Polonica A, September 2018, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  38. High Temperature Stability of an Al-Zr-Ti Alloy Prepared using Gas Atomization and Spark Plasma Sintering Technology

    Article • Acta Physica Polonica A, September 2018, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  39. Barium Titanate Dielectrics Sprayed by a High Feed-Rate Water-Stabilized Plasma Torch

    Article • Journal of Materials Engineering and Performance, August 2018, Springer Science + Business Media

    Frantisek Lukac

  40. Modification of M2 hardfacing: Effect of molybdenum alloying and laser surface melting on microstructure and wear performance

    Article • Wear, June 2018, Elsevier

    Frantisek Lukac

  41. EIS and corrosion behaviour of plasma sprayed layers of Al and AlCr6Fe2 on AZ91

    Article • Koroze a ochrana materiálu, May 2018, De Gruyter

    Frantisek Lukac

  42. The Influence of Milling and Spark Plasma Sintering on the Microstructure and Properties of the Al7075 Alloy

    Article • Materials, April 2018, MDPI AG

    Frantisek Lukac

  43. AE42 magnesium alloy prepared by spark plasma sintering

    Article • Journal of Alloys and Compounds, April 2018, Elsevier

    Robert Král, Frantisek Lukac

  44. Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

    Article • Journal of the European Ceramic Society, April 2018, Elsevier

    Frantisek Lukac

  45. Influence of mechanical activation on DC conductivity of kaolin

    Article • Applied Clay Science, March 2018, Elsevier

    Frantisek Lukac

  46. Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective

    Article • Ceramics International, February 2018, Elsevier

    Frantisek Lukac

  47. Microstructure and phase stability of W-Cr alloy prepared by spark plasma sintering

    Article • Fusion Engineering and Design, February 2018, Elsevier

    Frantisek Lukac

  48. COMPACTION OF LITHIUM-SILICATE CERAMICS USING SPARK PLASMA SINTERING

    Article • Ceramics - Silikaty, November 2017, Institute of Rock Structure and Mechanics, AS CR

    Frantisek Lukac

  49. Influence of the Surface Condition of Specimens on the Size of Coherently Diffracting Domains

    Article • Solid State Phenomena, November 2017, Trans Tech Publications

    Frantisek Lukac

  50. Characterization of Defects in Titanium Created by Hydrogen Charging

    Article • Acta Physica Polonica A, November 2017, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  51. Positronium Probing of Pores in Zirconia Nanopowders

    Article • Acta Physica Polonica A, November 2017, Institute of Physics, Polish Academy of Sciences

    Frantisek Lukac

  52. Nanocrystalline Al7075 + 1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering

    Article • Materials, September 2017, MDPI AG

    Frantisek Lukac

  53. Strontium Zirconate TBC Sprayed by a High Feed-Rate Water-Stabilized Plasma Torch

    Article • Journal of Thermal Spray Technology, September 2017, Springer Science + Business Media

    Frantisek Lukac

  54. The High-Temperature Wear and Oxidation Behavior of CrC-Based HVOF Coatings

    Article • Journal of Thermal Spray Technology, September 2017, Springer Science + Business Media

    Frantisek Lukac

  55. Controlling Microstructure of Yttria-Stabilized Zirconia Prepared from Suspensions and Solutions by Plasma Spraying with High Feed Rates

    Article • Journal of Thermal Spray Technology, September 2017, Springer Science + Business Media

    Frantisek Lukac

  56. Development of suspension plasma sprayed alumina coatings with high enthalpy plasma torch

    Article • Surface and Coatings Technology, September 2017, Elsevier

    Frantisek Lukac

  57. Characterization of defects in titanium created by hydrogen charging

    Article • International Journal of Hydrogen Energy, June 2017, Elsevier

    Dr Jakub Cizek, Ladislav Havela, Frantisek Lukac

  58. Preparation and properties of plasma sprayed NiAl10 and NiAl40 coatings on AZ91 substrate

    Article • Surface and Coatings Technology, June 2017, Elsevier

    Frantisek Lukac

  59. Effect of cryogenic milling on Al7075 prepared by spark plasma sintering method

    Article • Powder Diffraction, May 2017, Cambridge University Press

    Frantisek Lukac

  60. Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C

    Article • Oxidation of Metals, April 2017, Springer Science + Business Media

    Frantisek Lukac

  61. Dielectric properties and vacancy-like defects in plasma-sprayed barium titanate

    Article • Journal of the American Ceramic Society, April 2017, Wiley

    Frantisek Lukac

  62. Hydrogen absorption in Mg-Gd alloy

    Article • International Journal of Hydrogen Energy, April 2017, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  63. Hydrogen-Induced Defects in Titanium

    Article • Defect and Diffusion Forum, March 2017, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  64. Processing of bulk Al7075 alloy by spark plasma sintering

    Article • IOP Conference Series Materials Science and Engineering, February 2017, Institute of Physics Publishing

    Frantisek Lukac

  65. Microhardness and In Vitro Corrosion of Heat-Treated Mg–Y–Ag Biodegradable Alloy

    Article • Materials, January 2017, MDPI AG

    Frantisek Lukac

  66. Point defects in ZnO crystals grown by various techniques

    Article • Journal of Physics Conference Series, January 2017, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  67. Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion

    Article • Metals, December 2016, MDPI AG

    Frantisek Lukac

  68. Spark Plasma Sintering of a Gas Atomized Al7075 Alloy: Microstructure and Properties

    Article • Materials, December 2016, MDPI AG

    Frantisek Lukac

  69. Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology

    Article • Journal of Thermal Spray Technology, December 2016, Springer Science + Business Media

    Frantisek Lukac

  70. Barium titanate nanometric polycrystalline ceramics fired by spark plasma sintering

    Article • Ceramics International, November 2016, Elsevier

    Frantisek Lukac

  71. Characterisation of irradiation-induced defects in ZnO single crystals

    Article • Journal of Physics Conference Series, January 2016, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  72. Effects in Mg-Zn-based alloys strengthened by quasicrystalline phase

    Article • Journal of Physics Conference Series, January 2016, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  73. Ultra fine grained Ti prepared by severe plastic deformation

    Article • Journal of Physics Conference Series, January 2016, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  74. Influence of microstructure and mechanical stress on behavior of hydrogen in 500nm Pd films

    Article • Journal of Alloys and Compounds, October 2015, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  75. Stress release during cyclic loading of 20nm palladium films

    Article • Journal of Alloys and Compounds, October 2015, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  76. The Effect of Heat Treatment on Morphology and Phase Composition of Grain Boundary Phases in Mg-Zn-Y-Nd-Zr

    Article • Defect and Diffusion Forum, July 2015, Trans Tech Publications

    Dr Jakub Cizek, Prof. Dr. Bohumil Smola, Frantisek Lukac

  77. Hydrogen-Induced Buckling of Pd Films Deposited on Various Substrates

    Article • Defect and Diffusion Forum, July 2015, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  78. Positive effect of hydrogen-induced vacancies on mechanical alloying of Fe and Al

    Article • Journal of Alloys and Compounds, April 2015, Elsevier

    Dr Jakub Cizek, Frantisek Lukac, Dr. Dusan Janickovic

  79. Effect of Hydrogen on Formation of Fe-Al Nanoparticles by Mechanical Milling

    Article • Journal of Nano Research, December 2014, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac, Dr. Dusan Janickovic

  80. Investigation of H + implanted Fe-Al alloys

    Article • Journal of Physics Conference Series, April 2014, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  81. Structural studies of thin Pd films loaded with hydrogen

    Article • Journal of Physics Conference Series, April 2014, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  82. Positron annihilation in flight: experiment with slow and fast positrons

    Article • Journal of Physics Conference Series, April 2014, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  83. Vickers Hardness and Positron Annihilation Study of Eurofer97 and ODS Eurofer

    Article • Acta Physica Polonica A, March 2014, Institute of Physics, Polish Academy of Sciences

    Dr Jakub Cizek, Frantisek Lukac

  84. Defects Studies of ZnO Single Crystals Prepared by Various Techniques

    Article • Acta Physica Polonica A, March 2014, Institute of Physics, Polish Academy of Sciences

    Dr Jakub Cizek, Frantisek Lukac

  85. Hydrogen Interaction with Defects in Nanocrystalline, Polycrystalline and Epitaxial Pd Films

    Article • Journal of Nano Research, December 2013, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  86. Hydrogen absorption and diffusivity in ZnO single crystals

    Article • Journal of Alloys and Compounds, December 2013, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  87. Hydrogen absorption in thin ZnO films prepared by pulsed laser deposition

    Article • Journal of Alloys and Compounds, December 2013, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  88. Hydrogen-induced microstructural changes of Pd films

    Article • International Journal of Hydrogen Energy, September 2013, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  89. Vacancy-induced hardening in Fe-Al alloys

    Article • Journal of Physics Conference Series, June 2013, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac, Dr. Dusan Janickovic

  90. Anisotropy of Hydrogen Diffusivity in ZnO

    Article • Defect and Diffusion Forum, January 2013, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  91. Hydrogen Interaction with Defects in ZnO

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  92. Low Background Digital Coincidence Spectrometer – A Tool for Investigation of Positron Annihilation in Flight

    Article • Defect and Diffusion Forum, September 2012, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  93. Structural Studies of Nanocrystalline Thin Pd Films Electrochemically Doped with Hydrogen

    Article • Defect and Diffusion Forum, September 2012, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  94. Characterization of quenched-in vacancies in Fe–Al alloys

    Article • Physica B Condensed Matter, July 2012, Elsevier

    Dr Jakub Cizek, Frantisek Lukac, Dr. Dusan Janickovic

  95. Diffusivity of Hydrogen in ZnO Single Crystal

    Article • Defect and Diffusion Forum, April 2012, Trans Tech Publications

    Dr Jakub Cizek, Frantisek Lukac

  96. Hydrogen-Induced Plastic Deformation in ZnO

    Article • Physics Procedia, January 2012, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  97. Thermal vacancies in Fe3Al studied by positron annihilation

    Article • Acta Materialia, June 2011, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  98. Achieving coherent phase transition in palladium–hydrogen thin films

    Article • Scripta Materialia, May 2011, Elsevier

    Dr Jakub Cizek, Frantisek Lukac

  99. Quenched-in vacancies in Fe3Al based alloys: a positron annihilation study

    Article • Journal of Physics Conference Series, January 2011, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  100. Quenched-in vacancies in Fe-Al alloys

    Article • Journal of Physics Conference Series, January 2011, Institute of Physics Publishing

    Dr Jakub Cizek, Frantisek Lukac

  101. Quenched-in vacancies in Fe-Al alloys

    Article • physica status solidi c, November 2009, Wiley

    Dr Jakub Cizek, Frantisek Lukac