All Stories

  1. A systematic literature review of emergency communications assisted by unnamed aerial vehicles
  2. A Hybrid Technique for Mutual Coupling Reduction in a Compact Dual-Band Millimeter-Wave MIMO Antenna
  3. Preface: Proceedings of the 11th International Electronic Conference on Sensors and Applications
  4. Statement of Peer Review
  5. Field-Programmable Gate Array (FPGA)-Based Lock-In Amplifier System with Signal Enhancement: A Comprehensive Review on the Design for Advanced Measurement Applications
  6. An Acceleration Approach for Channel Deterministic Approaches Based on Quasi-Stationary Regions in V2X Communications
  7. Multi-Channel Radio-Over-Fiber Communication Systems Through Modulation Instability Phenomenon
  8. Spatial MIMO Channel Characterization Under Different Vehicular Distributions
  9. Reliable Methodology to FPGA Design Verification and Noise Analysis for Digital Lock-In Amplifiers
  10. Editorial Special Article Collection on Antennas and Propagation for Emerging 5G/6G Communications
  11. Preface: Proceedings of the 10th International Electronic Conference on Sensors and Applications
  12. Statement of Peer Review
  13. Digital twin modeling of open category UAV radio communications: A case study
  14. IIoT Low-Cost ZigBee-Based WSN Implementation for Enhanced Production Efficiency in a Solar Protection Curtains Manufacturing Workshop
  15. Design and Analysis of a Low Profile Millimeter-Wave Band Vivaldi MIMO Antenna for Wearable WBAN Applications
  16. From Theory to Practice: A Hands-On Guide to the Deployment of Smart Classrooms
  17. Low-Cost Multiband Four-Port Phased Array Antenna for Sub-6 GHz 5G Applications With Enhanced Gain Methodology in Radio-Over-Fiber Systems Using Modulation Instability
  18. Multimodal Minimally Invasive Wearable Technology for Epilepsy Monitoring: A Feasibility Study of the Periauricular Area
  19. Diffuse-Scattering-Informed Geometric Channel Modeling for THz Wireless Communications Systems
  20. An Enhanced Approach to Virtually Increase Quasi-Stationarity Regions Within Geometric Channel Models for Vehicular Communications
  21. Front Matter: Volume 12708
  22. mmWave Channel Stationarity Analysis of V2X Communications in an Urban Environment
  23. Pazienteen segimendua eraikin anitzeko eta tunelez konektatutako ospitale gune batean
  24. Virtual antenna array for reduced energy per bit transmission at Sub-5 GHz mobile wireless communication systems
  25. Preface: Proceedings of the 9th International Electronic Conference on Sensors and Applications
  26. Metamaterials and Their Application in the Performance Enhancement of Reconfigurable Antennas: A Review
  27. A Shorted Stub Loaded UWB Flexible Antenna for Small IoT Devices
  28. A Low-Profile Antenna for On-Body and Off-Body Applications in the Lower and Upper ISM and WLAN Bands
  29. Smart city lighthouse project towards sustainable urban development
  30. Metasurface-Inspired Flexible Wearable MIMO Antenna Array for Wireless Body Area Network Applications and Biomedical Telemetry Devices
  31. Characterization of Multilayer Coupling Based on Square Complementary Split Ring Resonator for Multiport Device Implementation
  32. Design, Assessment and Deployment of an Efficient Golf Game Dynamics Management System Based on Flexible Wireless Technologies
  33. Electronically reconfigurable and conformal triband antenna for wireless communications systems and portable devices
  34. 3-D Ray Launching MIMO Channel Geometric Estimation
  35. Electromagnetic Assessment of UHF-RFID Devices in Healthcare Environment
  36. Stripline Multilayer Devices Based on Complementary Split Ring Resonators
  37. Monitoring of Electric Buses Within an Urban Smart City Environment
  38. A 3-D Indoor Analysis of Path Loss Modeling Using Kriging Techniques
  39. Deterministic Wireless Channel Characterization towards the Integration of Communication Capabilities to Enable Context Aware Industrial Internet of Thing Environments
  40. Preface: Proceedings of the 8th International Electronic Conference on Sensors and Applications
  41. A Frequency Reconfigurable Compact Planar Inverted-F Antenna for Portable Devices
  42. 5G Spatial Modeling of Personal RF-EMF Assessment Within Aircrafts Cabin Environments
  43. A Compact CPW-Fed Ultra-Wideband Multi-Input-Multi-Output (MIMO) Antenna for Wireless Communication Networks
  44. Bi2Bi Communication: Toward Encouragement of Sustainable Smart Mobility
  45. Design and Implementation of a Feasible Model for the IoT Based Ubiquitous Healthcare Monitoring System for Rural and Urban Areas
  46. Electromagnetic Characterization of UHF-RFID Fixed Reader in Healthcare Centers Related to the Personal and Labor Health
  47. IoT-Based COVID-19 Diagnosing and Monitoring Systems: A Survey
  48. Novel Concentric Hexagonal-Shaped RFID Tag Antenna With T-Shaped Stub Matching
  49. Towards Environmental RF-EMF Assessment of mmWave High-Node Density Complex Heterogeneous Environments
  50. IoT Enabled Low Cost Distributed Angle Measurement Fault Detection System for LFR Plants
  51. Deterministic and Empirical Approach for Millimeter-Wave Complex Outdoor Smart Parking Solution Deployments
  52. Errealitate areagotuko sistema baten diseinu eta balioztatze esperimentala haririk gabeko integrazioarekin, auditoriumetan desgaitasuna pairatzen duten pertsonen esperientzia hobetzeko
  53. Antenna on Chip (AoC) Design Using Metasurface and SIW Technologies for THz Wireless Applications
  54. Spatial V2X Traffic Density Channel Characterization for Urban Environments
  55. Theoretical Study of the Input Impedance and Electromagnetic Field Distribution of a Dipole Antenna Printed on an Electrical/Magnetic Uniaxial Anisotropic Substrate
  56. A Novel Hook-Shaped Antenna Operating at 28 GHz for Future 5G mmwave Applications
  57. Preface: Proceedings of the 7th International Electronic Conference on Sensors and Applications
  58. Design and Realization of a Frequency Reconfigurable Multimode Antenna for ISM, 5G-Sub-6-GHz, and S-Band Applications
  59. Metamaterial Based Design of Compact UWB/MIMO Monopoles Antenna with Characteristic Mode Analysis
  60. Singular Integral Formulations for Electrodynamic Analysis of Metamaterial-Inspired Antenna Array
  61. A Metasurface-Based Single-Layered Compact AMC-Backed Dual-Band Antenna for Off-Body IoT Devices
  62. Analysis of the Combinatory Effect of Uniaxial Electrical and Magnetic Anisotropy on the Input Impedance and Mutual Coupling of a Printed Dipole Antenna
  63. Basketball Player On-Body Biophysical and Environmental Parameter Monitoring Based on Wireless Sensor Network Integration
  64. Design and Experimental Validation of an Augmented Reality System With Wireless Integration for Context Aware Enhanced Show Experience in Auditoriums
  65. Design of a Dual Band SNG Metamaterial Based Antenna for LTE 46/WLAN and Ka-Band Applications
  66. Empirical and Modeling Approach for Environmental Indoor RF-EMF Assessment in Complex High-Node Density Scenarios: Public Shopping Malls Case Study
  67. Enabling Customizable Services for Multimodal Smart Mobility With City-Platforms
  68. Future Smartphone: MIMO Antenna System for 5G Mobile Terminals
  69. Metasurface-Based Wideband MIMO Antenna for 5G Millimeter-Wave Systems
  70. Overcoming Inherent Narrow Bandwidth and Low Radiation Properties of Electrically Small Antennas by Using an Active Interior-Matching Circuit
  71. Propagation Models in Vehicular Communications
  72. Wireless Characterization and Assessment of an UWB-Based System in Industrial Environments
  73. Multimode HMSIW-Based Bandpass Filter with Improved Selectivity for Fifth-Generation (5G) RF Front-Ends
  74. Patient Tracking in a Multi-Building, Tunnel-Connected Hospital Complex
  75. Radio Wave Propagation in Vehicular Environments
  76. Design, Implementation, and Empirical Validation of an IoT Smart Irrigation System for Fog Computing Applications Based on LoRa and LoRaWAN Sensor Nodes
  77. Radio Wave Propagation and WSN Deployment in Complex Utility Tunnel Environments
  78. Analysis, Design and Practical Validation of an Augmented Reality Teaching System Based on Microsoft HoloLens 2 and Edge Computing
  79. Deterministic Propagation Approach for Millimeter-Wave Outdoor Smart Parking Solution Deployment
  80. Implementation of a WSN-Based IIoT Monitoring System within the Workshop of a Solar Protection Curtains Company
  81. Low-Cost Cloud-Enabled Wireless Monitoring System for Linear Fresnel Solar Plants
  82. Artificial Intelligence in Government
  83. Isolation Improvement in UWB-MIMO Antenna System Using Slotted Stub
  84. Fifth-Generation (5G) mmWave Spatial Channel Characterization for Urban Environments’ System Analysis
  85. Deterministic 3D Ray-Launching Millimeter Wave Channel Characterization for Vehicular Communications in Urban Environments
  86. Advances in Deterministic Wireless Channel Characterization for IoT Applications
  87. High-Gain On-Chip Antenna Design on Silicon Layer With Aperture Excitation for Terahertz Applications
  88. INTERACTIVE PROMOTION OF STEM UNIVERSITY DEGREES AMONG HIGH SCHOOL STUDENTS
  89. Impact of sensor data on intelligent environments
  90. Preface: Proceedings of the 6th International Electronic Conference on Sensors and Applications
  91. A Review of IoT Sensing Applications and Challenges Using RFID and Wireless Sensor Networks
  92. Design and Empirical Validation of a LoRaWAN IoT Smart Irrigation System
  93. Massive MIMO Systems: Present and Future
  94. A Comprehensive Survey of “Metamaterial Transmission-Line Based Antennas: Design, Challenges, and Applications”
  95. A Comprehensive Survey on “Various Decoupling Mechanisms With Focus on Metamaterial and Metasurface Principles Applicable to SAR and MIMO Antenna Systems”
  96. Metamaterial-Inspired Antenna Array for Application in Microwave Breast Imaging Systems for Tumor Detection
  97. A 3D Ray Launching Time-Frequency Channel Modeling Approach for UWB Ranging Applications
  98. Aggregator to Electric Vehicle LoRaWAN Based Communication Analysis in Vehicle-to-Grid Systems in Smart Cities
  99. Building Decentralized Fog Computing-Based Smart Parking Systems: From Deterministic Propagation Modeling to Practical Deployment
  100. Enhanced Wireless Channel Estimation Through Parametric Optimization of Hybrid Ray Launching-Collaborative Filtering Technique
  101. From 2G to 5G Spatial Modeling of Personal RF-EMF Exposure Within Urban Public Trams
  102. Implementation of an Interactive Environment With Multilevel Wireless Links for Distributed Botanical Garden in University Campus
  103. Miniaturization Trends in Substrate Integrated Waveguide (SIW) Filters: A Review
  104. Towards Sub-Meter Level UWB Indoor Localization Using Body Wearable Sensors
  105. Impact of Body Wearable Sensor Positions on UWB Ranging
  106. Hybrid Computational Techniques: Electromagnetic Propagation Analysis in Complex Indoor Environments
  107. Effects of the Body Wearable Sensor Position on the UWB Localization Accuracy
  108. Analysis and Design of IoT-Enabled, Low-Cost Distributed Angle Measurement System
  109. Millimeter Wave Spatial Channel Characterization for Vehicular Communications
  110. Multi-Level Internet of Things Communication Strategy for Microgrid Smart Network
  111. Wireless Channel Assessment of Auditoriums for the Deployment of Augmented Reality Systems for Enhanced Show Experience of Impaired Persons
  112. Wireless Channel Characterization and System Analysis of Complex Utility Tunnel Environments
  113. A Radio Channel Model for D2D Communications Blocked by Single Trees in Forest Environments
  114. Effects of the Body Wearable Sensor Position on the UWB Localization Accuracy
  115. Implementation of Radiating Elements for Radiofrequency Front-Ends by Screen-Printing Techniques for Internet of Things Applications
  116. Performance Evaluation and Interference Characterization of Wireless Sensor Networks for Complex High-Node Density Scenarios
  117. Design and Experimental Validation of a LoRaWAN Fog Computing Based Architecture for IoT Enabled Smart Campus Applications
  118. High-Isolation Leaky-Wave Array Antenna Based on CRLH-Metamaterial Implemented on SIW with ±30o Frequency Beam-Scanning Capability at Millimetre-Waves
  119. FDTD and Empirical Exploration of Human Body and UWB Radiation Interaction on TOF Ranging
  120. Super-Wide Impedance Bandwidth Planar Antenna for Microwave and Millimeter-Wave Applications
  121. Super-Wide Impedance Bandwidth Planar Antenna Based on Metamaterial Concept for Microwave and Millimetre-Wave Applications
  122. Beam-Scanning Leaky-Wave Antenna Based on CRLH-Metamaterial for Millimeter-Wave Applications
  123. Preface: Proceedings of the 5th International Electronic Conference on Sensors and Applications
  124. Analysis, Design and Empirical Validation of a Smart Campus Based on LoRaWAN
  125. Performance Evaluation and Interference Characterization of Wireless Sensor Networks for Complex High-Node Density Scenarios
  126. Radio Channel Characterization in Dense Forest Environments for IoT-5G
  127. Integration of Autonomous Wireless Sensor Networks in Academic School Gardens
  128. Keynote Speech 2 Vehicular Context Aware Environments
  129. Antenna Mutual Coupling Suppression Over Wideband Using Embedded Periphery Slot for Antenna Arrays
  130. Antenna Mutual Coupling Suppression Over Wideband Using Embedded Periphery Slot for Antenna Arrays
  131. Study on Isolation Improvement Between Closely Packed Patch Antenna Arrays Based on Fractal Metamaterial Electromagnetic Bandgap Structures
  132. Narrowband Characterization of Near-Ground Radio Channel for Wireless Sensors Networks at 5G-IoT Bands
  133. Deterministic Propagation Modeling for Intelligent Vehicle Communication in Smart Cities
  134. Implementation and Operational Analysis of an Interactive Intensive Care Unit within a Smart Health Context
  135. Wideband Printed Monopole Antenna for Application in Wireless Communication Systems
  136. Characterization of Near-Ground Radio Propagation Channel for Wireless Sensor Network with Application in Smart Agriculture
  137. Deterministic Propagation Modeling for Intelligent Vehicle Communication in Smart Cities
  138. Integration of Autonomous Wireless Sensor Networks in Academic School Gardens
  139. Wireless System Integration to Enable Smart Cities and Smart Regions
  140. Challenges in Wireless System Integration as Enablers for Indoor Context Aware Environments
  141. Spatial Characterization of Radio Propagation Channel in Urban Vehicle-to-Infrastructure Environments to Support WSNs Deployment
  142. Response of complementary split ring resonators in composite stratified substrate integrated waveguide
  143. Gailu Elektrikoek sortutako Erradiazioaren Estimazio Determinista Metodo Hibrido berri baten bidez
  144. Electrical properties of materials, ninth edition, by Laszlo Solymar, Donald Walsh and Richard R. A. Syms
  145. Optimization and Design of Wireless Systems for the Implementation of Context Aware Scenarios in Railway Passenger Vehicles
  146. Analysis of Bluetooth-Based Wireless Sensor Networks Performance in Hospital Environments
  147. Characterization of Radio Propagation Channel in Urban Vehicle to Infrastructure Environments to Support WSNs
  148. Generation of circularly polarized waves based on electro inductive-wave (EIW) coupling to chains of complementary split ring resonators
  149. Challenges in Wireless System Integration in the Implementation of Smart City Environments
  150. Prediction in the Operation of RFID Vehicular Systems
  151. Implementation and Analysis of a Wireless Sensor Network-Based Pet Location Monitoring System for Domestic Scenarios
  152. Implementation and Analysis of ISM 2.4 GHz Wireless Sensor Network Systems in Judo Training Venues
  153. Evaluation of Deployment Challenges of Wireless Sensor Networks at Signalized Intersections
  154. Implementation of Wireless Sensor Network Architecture for Interactive Shopping Carts to Enable Context-Aware Commercial Areas
  155. Highly efficient error correcting codes for ubiquitous healthcare in Wireless Body Area Networks
  156. Characterisation of radio wave propagation in complex indoor environments with and accurate Ray Launching and UTD method
  157. Synthesis design of single notched-band UWB antenna using the CSRR dynamic resonance
  158. Implementation of Context Aware e-Health Environments Based on Social Sensor Networks
  159. SesToCross: Semantic Expert System to Manage Single-Lane Road Crossing
  160. Performance Analysis of ZigBee Wireless Networks for AAL through Hybrid Ray Launching and Collaborative Filtering
  161. A Hybrid Ray Launching-Diffusion Equation Approach for Propagation Prediction in Complex Indoor Environments
  162. Optimised Wireless Channel Characterisation in Large Complex Environments by Hybrid Ray Launching-Collaborative Filtering Approach
  163. Design and Implementation of Context Aware Applications with Wireless Sensor Network Support in Urban Train Transportation Environments
  164. An accurate UTD extension to a ray-launching algorithm for the analysis of complex indoor radio environments
  165. Characterization of Wireless Channel Impact on Wireless Sensor Network Performance in Public Transportation Buses
  166. Influence of impairments due to dispersive propagation on the antenna design for body-based applications
  167. Assessment of ISM 2.4 GHz Wireless Sensor Networks Performance in Judo Training Venues
  168. Radio Wave Characterization in Wireless Sensor Network-based Intelligent Transportation Systems for Traffic Light Control Systems
  169. Radio propagation analysis for ZigBee based indoor dog monitoring system
  170. Dense wireless sensor network design for the implementation of Smart Health environments
  171. Exposure assessment from s-Health solutions based on WLAN/WBAN systems
  172. Dosimetric assessment of RadioFrequency power leakage from microwave ovens in complex scenarios
  173. Stacked CPW-fed antenna for satellite applications with gain enhancement
  174. Challenges in the implementation of context-aware scenarios within emergency rooms
  175. Hybrid-based optimization of wireless channel characterization for health services in medical complex environments
  176. Analysis of wireless sensor network performance embedded in motorcycle communication system
  177. High gain leaky wave antenna operating at 0.566 THz
  178. Low Cost Real Time Location System Based in Radio Frequency Identification for the Provision of Social and Safety Services
  179. Wireless Systems Applied to e-Health: Radio-Planning, Energy Efficiency, and System Integration
  180. s-health as a driver towards better emergency response systems in urban environments
  181. Design and implementation of dual-band antennas based on a complementary split ring resonators
  182. Band-pass filter-like antenna validation in an ultra-wideband in-car wireless channel
  183. Analysis of Wireless Sensor Network Topology and Estimation of Optimal Network Deployment by Deterministic Radio Channel Characterization
  184. Operation, Analysis and Optimization of Wireless Sensor Devices in Health Oriented Monitoring Systems
  185. Analysis of topo-morphological influence of vineyards in the design of wireless sensor networks for smart viticultural management
  186. Evaluation of Electromagnetic Interference and Exposure Assessment from s-Health Solutions Based on Wi-Fi Devices
  187. Estimation of Radiofrequency Power Leakage from Microwave Ovens for Dosimetric Assessment at Nonionizing Radiation Exposure Levels
  188. Radio Characterization for ISM 2.4 GHz Wireless Sensor Networks for Judo Monitoring Applications
  189. Analysis of Radio Wave Propagation for ISM 2.4 GHz Wireless Sensor Networks in Inhomogeneous Vegetation Environments
  190. Understanding the evolution of ultrawideband pulses through naturally dispersive media
  191. Ultra wideband and tri-band antennas for satellite applications at C-, X-, and Ku bands
  192. Implementing artificial electromagnetic media and devices at UPNA
  193. Characterization of wireless channel response in in-vehicle environments
  194. Low profile THz periodic leaky-wave antenna
  195. Analysis of efficient dense wireless sensor network deployment in Smart City environments
  196. The role of university-industry liaisons to enhance engineering curricular development
  197. E-Government Interoperability: Linking Open and Smart Government
  198. A coplanar waveguide-fed printed antenna with complementary split ring resonator for wireless communication systems
  199. Radio channel characterization for bluetooth communication systems onboard commercial aircrafts
  200. ZigBee Radio Channel Analysis in a Complex Vehicular Environment [Wireless Corner]
  201. Smart health: A context-aware health paradigm within smart cities
  202. Review of specific absorption definition considering the evolution of the Brillouin precursors
  203. Estimation of wireless coverage in complex cave environments for speleology applications
  204. Analysis of radiopropagation of wireless transceivers in surfboards
  205. Topological dependence in the performance of deterministic wireless channel estimation
  206. Channel characterization in indoor wireless sensor network deployment in commercial environment
  207. Unidimensional artificial dielectric and metamaterial structures in planar circuit technology
  208. Assessment of electromagnetic dosimetric values from non-ionizing radiofrequency sources in a conventional road vehicle
  209. Radio Characterization for ISM 2.4 GHz Wireless Sensor Networks for Judo Applications
  210. Analysis of Radio Wave Propagation for ISM 2.4GHz Wireless Sensor Networks in Inhomogeneous Vegetation Environments
  211. Analysis of Wireless Sensor Network Topology and Estimation of Optimal Network Deployment by Deterministic Radio Channel Characterization
  212. The influence of gender in the adoption of engineering studies
  213. Fostering Industry-Academia synergies in the curricular development of engineering education
  214. Implementing context aware scenarios to enable smart health in complex urban environments
  215. Analysis of the use of simulation resources in the accomplishment of academic goals of electromagnetism in engineering curricula
  216. Ubiquitous Connected Train Based on Train-to-Ground and Intra-Wagon Communications Capable of Providing on Trip Customized Digital Services for Passengers
  217. A Ray Launching-Neural Network Approach for Radio Wave Propagation Analysis in Complex Indoor Environments
  218. High-Qseries coupled microstrip split-ring resonator device
  219. Radio channel characterization of intra-body propagation under frequency dispersive perspective
  220. The role of university-industry liaisons in achieving comprehensive curricula in engineering
  221. Seeking clues to promote the participation of women in electrical engineering studies
  222. Impact of wireless sensor network cluster architecture in wireless channel performance
  223. Dosimetric assessment for non-ionizing ISM 2.4 GHz wireless systems in a commercial passenger aircraft
  224. Proposal for Improving Connectivity and adding Authentication and Security to KNXNet/IP Protocol
  225. Analysis of estimation of electromagnetic dosimetric values from non-ionizing radiofrequency fields in conventional road vehicle environments
  226. Assessment of Statistical Distribution of Exposure to Electromagnetic Fields from Social Alarm Devices
  227. Frequency Selective Properties of Coaxial Transmission Lines Loaded with Combined Artificial Inclusions
  228. Analysis of challenges in the application of deterministic wireless channel modelling in the implementation of WLAN-based indoor location system in large complex scenarios
  229. Energy Management System proposal for efficient smart homes
  230. Impact of Wireless Sensor Networks in the advancement of Ambient Intelligence and Smart Cities
  231. Characterization and consideration of topological impact of wireless propagation in a commercial aircraft environment [wireless corner]
  232. Cooperative network solution and implementation for emergency applications with enhanced position estimation capability
  233. Evaluation of the Brillouin precursor performance for ultra wide band intra-body technologies
  234. Experimental demonstration of negative group delay on the coupled regime of extraordinary transmission hole arrays
  235. Metamaterial enhanced phased-array antenna
  236. Estimation of Electromagnetic Dosimetric Values from Non-Ionizing Radiofrequency Fields in an Indoor Commercial Airplane Environment
  237. Performance evaluation of medium-matched waveforms and pulse shaping for application in ultrawideband intra-body technologies
  238. Implementation of microstrip planar filters with dispersive and anti-dispersive features in microwave frequencies for analysis of precursor fields
  239. Equivalent circuit of the double-fishnet metamaterial
  240. Development of a Low Mobility IEEE 802.15.4 Compliant VANET System for Urban Environments
  241. An Easy to Deploy Street Light Control System Based on Wireless Communication and LED Technology
  242. Analysis and Description of HOLTIN Service Provision for AECG monitoring in Complex Indoor Environments
  243. Analysis of stripline configurations loaded with complementary split ring resonators
  244. Design of a new ultra wideband planar antenna for wireless communication systems
  245. Compact Ultra Wide Band Microstrip Bandpass Filter Based on Multiple-Mode Resonator and Modified Complementary Split Ring Resonator
  246. Low Cost and Easy to Deploy Real Time Location System Based in Radio Frequency Identification
  247. Towards a Traceability System Based on RFID Technology to Check the Content of Pallets within Electronic Devices Supply Chain
  248. Towards a Train-to-Ground and Intra-wagon Communications Solution Capable of Providing on Trip Customized Digital Services for Passengers
  249. A COMPACT SPLIT RING RESONATOR ANTENNA FOR WIRELESS COMMUNICATION SYSTEMS
  250. Temporal and Frequency Evolution of Brillouin and Sommerfeld Precursors Through Dispersive Media in THz-IR Bands
  251. Home automation based sensor system for monitoring elderly people safety
  252. Impact of High Power Interference Sources in Planning and Deployment of Wireless Sensor Networks and Devices in the 2.4 GHz Frequency Band in Heterogeneous Environments
  253. Improved metal-dielectric antennas in UMTS frequency band through extraordinary transmission elements
  254. Measurement and modeling of a UHF-RFID system in a metallic closed vehicle
  255. SimuMANET: Collaborative development of an open-source based remote tool for the lab
  256. Role of group evaluation and autoevaluation methods within the learnign process in engineering
  257. Dual-band phase offset line with required transmission phases at two operational frequencies
  258. IVAN: Intelligent Van for the Distribution of Pharmaceutical Drugs
  259. Developments in extraordinary transmission metallic lens
  260. Dipersive propagation of ultra wideband pulses through triply distilled water at PHz frequencies
  261. Analysis of an UHF-RFID system in a metallic closed vehicle
  262. Calculation of Doppler spectrum for simultaneous time varying conditions
  263. Downshifting extraordinary transmission by meander-lines in hole arrays
  264. Impact of material changes in electromagnetic dosimetry estimation of complex indoor scenarios
  265. Optimized dual-band planar THz waveguide
  266. Topological and morphological influence in the performance of MIMO techniques in complex indoor scenarios
  267. Easily Deployable Streetlight Intelligent Control System Based on Wireless Communication
  268. Gain Improvement of Dual Band Antenna Based on Complementary Rectangular Split-Ring Resonator
  269. Performance Analysis of IEEE 802.15.4 Compliant Wireless Devices for Heterogeneous Indoor Home Automation Environments
  270. EVALUATION OF ELECTROMAGNETIC DOSIMETRY OF WIRELESS SYSTEMS IN COMPLEX INDOOR SCENARIOS WITH HUMAN BODY INTERACTION
  271. Integration of hybrid sensing networks in indoor intelligent homes
  272. Analysis of topology and morphology influence in indoor millimeter wave wireless networks
  273. Implementation of extraordinary transmission based devices in millimeter wave bands
  274. Negative group delay through subwavelength hole arrays
  275. Mastering the Propagation Through Stacked Perforated Plates: Subwavelength Holes vs. Propagating Holes
  276. Novel antennas based upon extraordinary transmission metamaterial lenses
  277. University-Enterprise Educational models in Telecommunication Engineering Degree. The case of the Universidad Publica de Navarra in Spain.
  278. Route for Bulk Millimeter Wave and Terahertz Metamaterial Design
  279. Enhanced gain dual band patch antenna based on complementary rectangular split-ring resonators
  280. DUPLEXERS AND MULTIPLEXERS BASED ON MICROSTRIP LINE LOADED WITH COMPLEMENTARY SPLIT RING RESONATORS
  281. TRANSMISSION PROPERTIES OF STACKED SRR METASURFACES IN FREE SPACE
  282. Analysis of topology considerations in indoor ZigBee meshed networks
  283. Slow light propagation in stacked complementary metasurfaces at microwave frequencies
  284. EBG and metamaterial devices and phenomena in planar and volumetric configurations
  285. Wireless channel modeling for campus sensor networks
  286. Development and Characterization of Quasi-Optical Mesh Filters and Metastructures for Subterahertz and Terahertz Applications
  287. Stacked complementary metasurfaces for ultraslow microwave metamaterials
  288. Use of e-learning functionalities: Results of a survey along Spain
  289. Practice and research in engineering education: Activities of the CESEI Technical Committee
  290. Engineering education research in Spain: A review through the education awards of CESEI — IEEE
  291. Single negative birefringence in stacked spoof plasmon metasurfaces by prism experiment
  292. Comments on “A High-Gain Antenna Consisting of Two Slot Elements With a Space Larger Than a Wavelength”
  293. WiMAX, LTE, and WiFi Interworking
  294. Selective dual-band subwavelength-hole-arrays-based polariser
  295. POLARIZATION-TUNABLE NEGATIVE OR POSITIVE REFRACTION IN SELF-COMPLEMENTARINESS-BASED EXTRAORDINARY TRANSMISSION PRISM
  296. Dual band patch antenna based on complementary rectangular split-ring resonators
  297. Novel metamaterials at millimeter and terahertz waves and lenses applications
  298. Extraordinary Transmission surfaces as superstrate
  299. Implementation of effective negative ɛ transmission line in stripline technology
  300. Planar horn antenna: Application of periodic stacked subwavelength hole array with metamaterials proprieties
  301. Simulation and analysis of performance of LTE in indoor environments
  302. Simulation and analysis of performance of indoor meshed ZigBee networks
  303. Wave propagation properties in stacked SRR/CSRR metasurfaces at microwave frequencies
  304. Application of Electromagnetic Band Gaps to Microwave Circuit Design
  305. Broadband spoof plasmons and subwavelength electromagnetic energy confinement on ultrathin metafilms
  306. Connection between extraordinary transmission and negative refraction in a prism of stacked sub-wavelength hole arrays
  307. Electroinductive waves role in left-handed stacked complementary split rings resonators
  308. ULTRA-WIDEBAND METAMATERIAL FILTER BASED ON ELECTROINDUCTIVE-WAVE COUPLING BETWEEN MICROSTRIPS
  309. Metamaterial multiresonances in waveguide and metasurfaces
  310. Comment on “A waveguide slit array antenna fabricated with subwavelength periodic grooves Appl. Phys. Lett. 91, 143512 (2007)”
  311. A Series Solution for the Single-Mode Synthesis Problem Based on the Coupled-Mode Theory
  312. Modeling the best practices towards the adaptation to the European credit transfer system in technical degrees within the IEEE ES chapter
  313. Parametrical study of left-handed or right-handed propagation by stacking hole arrays
  314. Low Pass Filter with Wide Rejection Band in Microstrip Technology
  315. Molding Left- or Right-Handed Metamaterials by Stacked Cutoff Metallic Hole Arrays
  316. Extraordinary transmission and left-handed propagation in miniaturized stacks of doubly periodic subwavelength hole arrays
  317. Forward and backward leaky wave radiation in split-ring-resonator-based metamaterials
  318. Left-handed behavior in a microstrip line loaded with squared split-ring resonators and an EBG pattern
  319. Very Low Profile and Dielectric Loaded Feeder Antenna
  320. Enhanced transmission in photonic crystal of hole arrays
  321. Performance Analysis by Measurement Results in Operating 3G Network
  322. Electroinductive waves in chains of complementary metamaterial elements
  323. Dual-Band Low-Profile Corrugated Feeder Antenna
  324. Work in Progress: Modeling the best practices of adaptation to European credit transfer system in technical teachings as improvement to the mobility of students
  325. Novel microstrip backward coupler with metamaterial cells for fully planar fabrication techniques
  326. Microwave filters with improved stopband based on sub-wavelength resonators
  327. Equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar transmission lines
  328. Ab initio analysis of frequency selective surfaces based on conventional and complementary split ring resonators
  329. Comparison of electromagnetic band gap and split-ring resonator microstrip lines as stop band structures
  330. Application of complementary split-ring resonators to the design of compact narrow band-pass structures in microstrip technology
  331. Compact coplanar waveguide band-pass filter at the S-band
  332. Complementary split-ring resonator for compact waveguide filter design
  333. Low-Profile Corrugated Feeder Antenna
  334. Very Low-Profile “Bull's Eye” Feeder Antenna
  335. Babinet Principle Applied to the Design of Metasurfaces and Metamaterials
  336. Microstrip "wiggly-line" bandpass filters with multispurious rejection
  337. Spurious passband suppression in microstrip coupled line band pass filters by means of split ring resonators
  338. Stop-band and band-pass characteristics in coplanar waveguides coupled to spiral resonators
  339. Effective negative-/spl epsiv/ stopband microstrip lines based on complementary split ring resonators
  340. A new LC series element for compact bandpass filter design
  341. Analysis of doubly periodic electromagnetic bandgap filters in coplanar waveguide technology
  342. Implementation of negative μ medium in coplanar waveguide technology
  343. Multiple-tuned continuous electromagnetic bandgap structures in coplanar waveguide technology
  344. Simulation of EBG structures in coplanar waveguides with the aid of FDTD
  345. Left handed coplanar waveguide band pass filters based on bi-layer split ring resonators
  346. Stepped-impedance lowpass filters with spurious passband suppression
  347. Miniaturized coplanar waveguide stop band filters based on multiple tuned split ring resonators
  348. Split ring resonator-based left-handed coplanar waveguide
  349. Coplanar waveguide structures loaded with split-ring resonators
  350. Dual electromagnetic bandgap CPW structures for filter applications
  351. New CPW low-pass filter based on a slow wave structure
  352. New electromagnetic bandgap nonlinear coplanar waveguides
  353. Periodic-loaded sinusoidal patterned electromagnetic bandgap coplanar waveguides
  354. Compact spurious free CPW bandpass filters based on electromagnetic bandgap structures
  355. Analysis of the Reflection Properties in Electromagnetic Bandgap Coplanar Waveguides Loaded with Reactive Elements
  356. Frequency tuning in electromagnetic bandgap nonlinear transmission lines
  357. New periodic-loaded electromagnetic bandgap coplanar waveguide with complete spurious passband suppression
  358. Novel photonic crystal waveguide in microwave printed-circuit technology
  359. Novel 2D-Electromagnetic Crystal Waveguide in Microwave Printed Circuit Technology
  360. Novel photonic bandgap microstrip structures using network topology
  361. Optimization of compact photonic bandgap microstrip structures
  362. Study of the delay characteristics of 1-D photonic bandgap microstrip structures
  363. Compact photonic bandgap microstrip structures
  364. Extended model based on the coupled-mode theory in fiber gratings for the analysis and design of 1D photonic bandgap devices in microstrip technology
  365. Bandpass Filter in Microstrip Technology using Photonic Bandgap Reflectors
  366. Novel Wideband Photonic Bandgap Microstrip Structures
  367. 1-D and 2-D photonic bandgap microstrip structures
  368. Analysis and design of 1-D photonic bandgap microstrip structures using a fiber grating model
  369. Improved 2-D photonic bandgap structures in microstrip technology
  370. Metamaterials in microstrip technology for filter applications
  371. Split rings resonators: key particles for microwave device design
  372. Smart Government
  373. Smart Government: