All Stories

  1. Assessment of lithium slag as a supplementary cementitious material: Pozzolanic activity and microstructure development
  2. Acid resistance of alkali-activated composites containing waste glass as fine aggregate
  3. Fresh state and hydration properties of high-volume lithium slag cement composites
  4. Eco-Efficiency Assessment Utilizing Recycled Glass Aggregate in Concrete
  5. Effect of Elevated Temperature on the Behavior of Amorphous Metallic Fibre-Reinforced Cement and Geopolymer Composites
  6. The Effect of Recycled Waste Glass as a Coarse Aggregate on the Properties of Portland Cement Concrete and Geopolymer Concrete
  7. Microstructural investigation of lithium slag geopolymer pastes containing silica fume and fly ash as additive chemical modifiers
  8. Mechanical and durability properties of C–S–H-seeded cement mortar cured at fluctuating low temperatures with granulated blast furnace slag as fine aggregates
  9. Chloride-Induced Corrosion Resistance of High-Volume Slag and High-Volume Slag–Fly Ash Blended Concretes Containing Nanomaterials
  10. Mechanical Properties of Amorphous Metallic Fiber–Reinforced Geopolymer Composites
  11. A Review on the Performance Evaluation of Autonomous Self-Healing Bacterial Concrete: Mechanisms, Strength, Durability, and Microstructural Properties
  12. Compressive behavior of precast concrete sandwich panels containing recycled tyre crumb rubber core
  13. Structural behavior of recycled tire crumb rubber sandwich panel in flexural bending
  14. Experimental and numerical study on structural behaviour of tyre-bale sandwich wall under different loading conditions
  15. Review on Performance Evaluation of Autonomous Healing of Geopolymer Composites
  16. Experimental studies on rheological, mechanical, and microstructure properties of self‐compacting concrete containing perovskite nanomaterial
  17. Compressive strength development and durability properties of high volume slag and slag-fly ash blended concretes containing nano-CaCO3
  18. The effect of specimen geometry on the compressive and tensile strengths of self-compacting rubberised concrete containing waste rubber granules
  19. Fly ash and ground granulated blast furnace slag-based alkali-activated concrete: Mechanical, transport and microstructural properties
  20. Influence of nano silica on compressive strength, durability, and microstructure of high‐volume slag and high‐volume slag–fly ash blended concretes
  21. Characterization and properties of geopolymer nanocomposites with different contents of nano-CaCO3
  22. Tensile and flexural behaviour of recycled polyethylene terephthalate (PET) fibre reinforced geopolymer composites
  23. Environmental assessment of supplementary cementitious materials and engineered nanomaterials concrete
  24. RETRACTED: Influence of nano-CaCO3 addition on the compressive strength and microstructure of high volume slag and high volume slag-fly ash blended pastes
  25. Performance evaluation of Ultrahigh performance fibre reinforced concrete – A review
  26. Experimental study on shear property and rheological characteristic of superfine cement grouts with nano-SiO2 addition
  27. Effect of Nanosilica on Mechanical Properties and Microstructure of PVA Fiber-Reinforced Geopolymer Composite (PVA-FRGC)
  28. Mechanical properties and behaviour of high-strength plain and hybrid-fiber reinforced geopolymer composites under dynamic splitting tension
  29. High Volume Slag and Slag-Fly Ash Blended Cement Pastes Containing Nano Silica
  30. Behaviour of CFRP wrapped RC square columns under eccentric compressive loading
  31. Effect of nano silica on compressive strength and microstructures of high volume blast furnace slag and high volume blast furnace slag-fly ash blended pastes
  32. Microscopic Investigation of Rate Dependence on Three-Point Notched-Tip Bending Sandstone
  33. Pullout Behavior of Hook End Steel Fibers in Geopolymers
  34. Influence of Nano Silica Particles on Durability of Flax Fabric Reinforced Geopolymer Composites
  35. Effect of Nano Alumina on Compressive Strength and Microstructure of High Volume Slag and Slag-Fly Ash Blended Pastes
  36. Effect of cooling on the residual mechanical properties and cracking of plain and fibrous geopolymer concretes at elevated temperatures
  37. Effect of fly ash on compressive strength and chloride binding of seawater-mixed mortars
  38. Behavior of fly ash geopolymer as fire resistant coating for timber
  39. Effect of fly ash on tensile properties of ultra-high performance fiber reinforced cementitious composites (UHP-FRCC)
  40. Semi-green cementitious materials from waste granite by considering the environmental, economic, and health impacts: A review
  41. Effects of slag content on the residual mechanical properties of ambient air-cured geopolymers exposed to elevated temperatures
  42. Mechanical properties of ambient cured high-strength plain and hybrid fiber reinforced geopolymer composites from triaxial compressive tests
  43. Mechanical and Durability Properties of Green Star Concretes
  44. Flexural behavior of hybrid PVA fibers reinforced ferrocement panels at elevated temperatures
  45. The ASR mechanism of reactive aggregates in concrete and its mitigation by fly ash: A critical review
  46. Effects of silica fume fineness on mechanical properties of steel fiber reinforced lightweight concretes subjected to ambient and elevated temperatures exposure
  47. Comparative strain and deflection hardening behaviour of polyethylene fibre reinforced ambient air and heat cured geopolymer composites
  48. Effects of Curing Conditions and Sand-to-Binder Ratios on Compressive Strength Development of Fly Ash Geopolymer
  49. Flexural Behavior of Hybrid PVA Fiber and AR-Glass Textile Reinforced Geopolymer Composites
  50. Effect of nano silica and fine silica sand on compressive strength of sodium and potassium activators synthesised fly ash geopolymer at elevated temperatures
  51. Mechanical properties of recycled aggregate concrete containing ternary blended cementitious materials
  52. Effects of fly ash fineness, nano silica, and curing types on mechanical and durability properties of fly ash mortars
  53. Mechanical properties of concrete containing recycled coarse aggregate at and after exposure to elevated temperatures
  54. Effect of mixing methods of nano silica on properties of recycled aggregate concrete
  55. Microstructure and Nanoscaled Characterization of HVFA Cement Paste Containing Nano-SiO2 and Nano-CaCO3
  56. Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag
  57. Ductile behavior of polyethylene fibre reinforced geopolymer composite
  58. Ductile fibre reinforced cementitious composites (DFRCC) for improved corrosion durability of reinforced concrete columns
  59. Experimental Study on Time-Dependent Behavior of Cracked UHP-FRCC Under Sustained Loads
  60. Compressive behaviour of sodium and potassium activators synthetized fly ash geopolymer at elevated temperatures: A comparative study
  61. Mechanical and durability properties of fly ash geopolymer concrete containing recycled coarse aggregates
  62. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash
  63. Effects of steel fibre and silica fume on impact behaviour of recycled aggregate concrete
  64. Mechanical properties of steel fibre reinforced geopolymer concretes at elevated temperatures
  65. Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar
  66. Characterizations of flax fabric reinforced nanoclay-geopolymer composites
  67. Laboratory Simulation of Corrosion Damage in Reinforced Concrete
  68. Effect of nano-clay on mechanical and thermal properties of geopolymer
  69. Effect of ultrafine fly ash on the properties of concretes containing construction and demolition wastes as coarse aggregates
  70. Effect of calcined nanoclay on the durability of NaOH treated hemp fabric-reinforced cement nanocomposites
  71. Chloride induced corrosion durability of high volume fly ash concretes containing nano particles
  72. Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite
  73. Effect of calcined nanoclay on microstructural and mechanical properties of chemically treated hemp fabric-reinforced cement nanocomposites
  74. Characterisation of mechanical and thermal properties in flax fabric reinforced geopolymer composites
  75. Corrosion Durability of Reinforcing Steel in Cracked High-Performance Fiber-Reinforced Cementitious Composite Beams
  76. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate
  77. Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA)
  78. Effect of nano silica on properties of concretes containing recycled coarse aggregates
  79. Effect of cooling methods on residual compressive strength and cracking behavior of fly ash concretes exposed at elevated temperatures
  80. Comparative deflection hardening behavior of short fiber reinforced geopolymer composites
  81. Mechanical and thermal properties of ambient cured cotton fabric-reinforced fly ash-based geopolymer composites
  82. Effect of cooling methods on residual compressive strength and cracking behavior of fly ash concretes exposed at elevated temperatures
  83. Mechanical properties of cotton fabric reinforced geopolymer composites at 200–1000 °C
  84. A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes
  85. Effect of Nano-CaCO<sub>3</sub> on Compressive Strength Development of High Volume Fly Ash Mortars and Concretes
  86. Durability properties of high volume fly ash concrete containing nano-silica
  87. Existence of Dividing Strength in Concrete Containing Recycled Coarse Aggregate
  88. Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites
  89. Compressive strength of fly-ash-based geopolymer concrete at elevated temperatures
  90. Advanced Composites with Natural Reinforcement
  91. Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar
  92. Fibre-reinforced geopolymer composites (FRGCs) for structural applications
  93. Properties of concrete containing recycled construction and demolition wastes as coarse aggregates
  94. Microstructures and mechanical properties of hemp fabric reinforced organoclay–cement nanocomposites
  95. Thermal and mechanical properties of hemp fabric-reinforced nanoclay–cement nanocomposites
  96. Deflection hardening behaviour of short fibre reinforced fly ash based geopolymer composites
  97. Thermal and mechanical properties of cotton fabric-reinforced geopolymer composites
  98. Review of mechanical properties of short fibre reinforced geopolymer composites
  99. Role of commercial software in teaching finite element analysis at undergraduate level: a case study
  100. Mechanical and Durability Properties of Mortars Modified with Combined Polymer and Supplementary Cementitious Materials
  101. Lightweight concrete incorporating pumice based blended cement and aggregate: Mechanical and durability characteristics
  102. Corrosion of Reinforcing Steel in Fiber Reinforced Cementitious Composites
  103. Strain hardening behavior of lightweight hybrid polyvinyl alcohol (PVA) fiber reinforced cement composites
  104. Restrained Shrinkage-Induced Cracking of Light Weight High Performance Fiber Reinforced Cementitious Composites
  105. Analytical Model for Tensile Strain Hardening and Multiple Cracking Behavior of Hybrid Fiber-Engineered Cementitious Composites
  106. Flexural responses of hybrid steel–polyethylene fiber reinforced cement composites containing high volume fly ash
  107. A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)
  108. Assessment of corrosion-induced damage and its effect on the structural behavior of RC beams containing supplementary cementitious materials
  109. Fiber Optic Sensing for Monitoring Corrosion-Induced Damage