All Stories

  1. Study of mechanical properties of in-situ developed epoxy/bagasse/carbonized eggshell composite by hand lay up method

    Article • January 2024, American Institute of Physics

    Prof (Dr.) Ashish Kumar Srivastava

  2. Fabrication and evaluation of mechanical properties of Al6061-SiC-TiB2 hybrid composites synthesized through stir casting method

    Article • January 2024, American Institute of Physics

    Prof (Dr.) Ashish Kumar Srivastava

  3. Bonding strength and microstructural features of Al5083-AZ31B alloys laminated sheet through friction stir additive manufacturing

    Article • Journal of Adhesion Science and Technology, July 2023, Taylor & Francis

    Prof (Dr.) Ashish Kumar Srivastava

  4. An investigation on microstructural features and bonding strength of magnesium-based multifunctional laminated composite developed by friction stir additive manufacturing

    Article • The International Journal of Advanced Manufacturing Technology, July 2023, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  5. Materials and Technology for Implant Manufacturing

    Article • June 2023, IGI Global

    Prof (Dr.) Ashish Kumar Srivastava

  6. Microwave-Assisted vs. Conventional Hydrothermal Synthesis, Morphology, Microstructure, and Surface Area Analysis of g-C3N4/MoS2 Nanocomposite

    Article • June 2023, IGI Global

    Prof (Dr.) Ashish Kumar Srivastava

  7. Review of Microstructural and Mechanical Properties of Microwave Welding of Lightweight Alloys

    Article • June 2023, IGI Global

    Prof (Dr.) Ashish Kumar Srivastava

  8. Microstructural, mechanical and tribological performance of a magnesium alloy AZ31B/Si3N4/eggshell surface composite produced by solid-state multi-pass friction stir processing

    Article • Materials Chemistry and Physics, June 2023, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  9. Effect of eggshell powder on the microstructural and thermal behavior of Al7075/waste eggshell surface composites produced by solid-state friction stir processing developed for potential thermal applications

    Article • The International Journal of Advanced Manufacturing Technology, May 2023, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  10. Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material

    Article • Materials, May 2023, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  11. Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities

    Article • Advances in Polymer Technology, May 2023, Hindawi Publishing Corporation

    Prof (Dr.) Ashish Kumar Srivastava

  12. Firefly Algorithm and Neural Network Employment for Dilution Analysis of Super Duplex Stainless Steel Clads over AISI 1020 Steel Using Gas Tungsten Arc Process

    Article • Coatings, April 2023, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  13. Modeling and analysis of K15 hollow glass microballoons filled epoxy syntactic foam for lightweight structures

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), April 2023, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  14. The Effect of Various Contaminants on the Surface Tribological Properties of Rail and Wheel Materials: An Experimental Approach

    Article • Coatings, March 2023, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  15. Research Progress in Metals and Alloys by Thermal Layering and Deposition

    Article • Coatings, February 2023, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  16. An Investigation for Minimizing the Wear Loss of Microwave-Assisted Synthesized g-C3N4/MoS2 Nanocomposite Coated Substrate

    Article • Coatings, January 2023, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  17. Color-Coded Light Signals for Swarm Robot Communication

    Article • Journal of Sensors, January 2023, Wiley

    Prof (Dr.) Ashish Kumar Srivastava

  18. Surface Modification and Parametric Optimization of Tensile Strength of Al6082/SiC/Waste Material Surface Composite Produced by Friction Stir Processing

    Article • Coatings, December 2022, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  19. Microwave-Assisted Synthesis, Characterization and Tribological Properties of a g-C3N4/MoS2 Nanocomposite for Low Friction Coatings

    Article • Coatings, November 2022, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  20. Tribological Characteristics of Al359/Si3N4/Eggshell Surface Composite Produced by Friction Stir Processing

    Article • Coatings, September 2022, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  21. Micro-Mechanical Finite Element Analysis on Mechanical Behavior of EN31 Steel-Based Metal Matrix Composite

    Article • Transactions of the Indian Institute of Metals, September 2022, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  22. Effective Evaluation of Elastic Properties of a Graphene and Ceramics Reinforced Epoxy Composite under a Thermal Environment Using the Impact Hammer Vibration Technique

    Article • Coatings, September 2022, MDPI AG

    Prof (Dr.) Ashish Kumar Srivastava

  23. A comparatively numerical investigation on heat transfer behavior of different materials used for internal combustion engines

    Article • International Journal of Engine Research, July 2022, SAGE Publications

    Prof (Dr.) Ashish Kumar Srivastava

  24. Wire Arc Additive Manufacturing – A revolutionary method in additive manufacturing

    Article • Materials Chemistry and Physics, June 2022, Elsevier

    PVS Mahesh, Prof (Dr.) Ashish Kumar Srivastava

  25. Review: Combating High Temperature Challenges using Pyrosic Material

    Article • February 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Prof (Dr.) Ashish Kumar Srivastava

  26. Modeling and parametric optimization of laser powder bed fusion 3D printing technique using artificial neural network for enhancing dimensional accuracy

    Article • Materials Today Proceedings, January 2022, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  27. Effect of eggshell waste and B4C particles on the mechanical and tribological properties of Al7075 alloy developed by friction stir processing

    Article • Metallurgical Research & Technology, January 2022, EDP Sciences

    Prof (Dr.) Ashish Kumar Srivastava

  28. Investigation on the friction stir assisted lap joining of pure copper and aluminium 6063 alloy

    Article • Materials Today Proceedings, January 2022, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  29. Investigation on the thermal behaviour of AZ31B/waste eggshell surface composites produced by friction stir processing

    Article • Composites Communications, December 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  30. Effect of friction stir processing on microstructural and mechanical properties of lightweight composites and cast metal alloys – A review

    Article • International Journal of Cast Metals Research, November 2021, Taylor & Francis

    Prof (Dr.) Ashish Kumar Srivastava

  31. Optimization of casting parameters for improved mechanical properties of eggshell reinforced composites

    Article • Materials Testing, November 2021, De Gruyter

    Prof (Dr.) Ashish Kumar Srivastava

  32. State of Art on Microstructural and Mechanical Characterization of Wire and Arc Additive Manufacturing (WAAM)

    Article • August 2021, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  33. A computational investigation on the influence of the l/d ratio and strain rate on the deformation behavior of rolled and homogeneous armor steel in the split Hopkinson pressure bar test process

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, August 2021, SAGE Publications

    Prof (Dr.) Ashish Kumar Srivastava

  34. Microstructural and X-ray Diffraction Analysis of Surface Composite AZ31b/MgO/B4C Produced by Friction Stir Processing

    Article • August 2021, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  35. Statistical Optimization of Process Parameters During the Friction Stir Processing of Al7075/Al2O3/waste Eggshell Surface Composite

    Article • August 2021, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  36. A review on elicit potentials in the brain to recognize Brain-Machine interface

    Article • Journal of Physics Conference Series, August 2021, Institute of Physics Publishing

    Prof (Dr.) Ashish Kumar Srivastava

  37. 20th Century Uninterrupted Growth in Friction Stir Processing of Lightweight Composites and Alloys

    Article • Materials Chemistry and Physics, July 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  38. Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite material

    Article • Materialwissenschaft und Werkstofftechnik, May 2021, Wiley

    Prof (Dr.) Ashish Kumar Srivastava

  39. Investigation on mechanical properties and deformation behavior of copper-based three-phase metal matrix composite: Experimental and micro-macro-mechanical finite element analysis

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, April 2021, SAGE Publications

    Prof (Dr.) Ashish Kumar Srivastava

  40. Investigation of effect of process variable on dimensional accuracy of FDM component using response surface methodology

    Article • World Journal of Engineering, April 2021, Emerald

    Prof (Dr.) Ashish Kumar Srivastava

  41. Statistical Optimization by Response Surface Methodology of Process Parameters During the CNC Turning Operation of Hybrid Metal Matrix Composite

    Article • Evergreen, March 2021, Japan Society of Ski Sciences

    Prof (Dr.) Ashish Kumar Srivastava

  42. Microstructural and Mechanical Properties of AZ31B/Graphene Nanocomposite Produced by Stir Casting

    Article • Revue des composites et des matériaux avancés, February 2021, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  43. Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite

    Article • International Journal of Cast Metals Research, January 2021, Taylor & Francis

    Prof (Dr.) Ashish Kumar Srivastava

  44. Microstructural and fractographic analysis of A359/Si3N4 surface composite produced by friction stir processing

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), January 2021, De Gruyter

    Prof (Dr.) Ashish Kumar Srivastava

  45. Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing

    Article • Materials Chemistry and Physics, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  46. Friction stir additive manufacturing – An innovative tool to enhance mechanical and microstructural properties

    Article • Materials Science and Engineering B, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  47. Design and optimization of the shape of electrostatic precipitator system

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  48. Effects of cutting parameters on aluminium alloys-A review

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  49. Microstructural and tensile behaviour of hybrid MMC Al7075/ SiC/B4C produced by mechanical stir casting

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  50. Numerical study of tensile strength and hardness of the AA1100/graphene MMC produced by stir casting

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  51. Parametric optimization of process parameters during the friction stir processing of Al7075/SiC/waste eggshell surface composite

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  52. Study of microstructural and mechanical properties of the component produced by friction stir additive manufacturing (FSAM)-A review

    Article • Materials Today Proceedings, January 2021, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  53. Effect of Multiple Passes on Microstructural and Mechanical Properties of Surface Composite Al 2024/SiC Produced by Friction Stir Processing

    Article • European Journal of Control, December 2020, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  54. Measurement of Form Errors and Comparative Cost Analysis for the Component Developed by Metal Printing (DMLS) and Stir Casting

    Article • Instrumentation Mesure Métrologie, November 2020, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  55. Modeling and optimization of fused deposition modeling (FDM) process through printing PLA implants using adaptive neuro-fuzzy inference system (ANFIS) model and whale optimization algorithm

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2020, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  56. Fabrication of AA7075 Hybrid Green Metal Matrix Composites by Friction Stir Processing Technique

    Article • European Journal of Control, September 2020, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  57. Effect of Graphene nanoparticles on microstructural and mechanical properties of aluminum based nanocomposites fabricated by stir casting

    Article • World Journal of Engineering, September 2020, Emerald

    Prof (Dr.) Ashish Kumar Srivastava

  58. Surface Roughness Report and 3D Surface Analysis of Hybrid Metal Matrix Composites (MMC) During Abrasive Water Jet (AWJ) Cutting

    Article • Revue des composites et des matériaux avancés, August 2020, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  59. 3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI

    Article • Evergreen, June 2020, Japan Society of Ski Sciences

    Prof (Dr.) Ashish Kumar Srivastava

  60. Influence of SD effect on Johnson–Cook hardening constitutive material model: Numerical and experimental investigation for armor steel

    Article • Mechanics of Advanced Materials and Structures, May 2020, Taylor & Francis

    Prof (Dr.) Ashish Kumar Srivastava

  61. Experimental and Numerical Investigation of Quasi-Static (10−3 s−1) Fracture Behavior of Armor Steel

    Article • Arabian Journal for Science and Engineering, April 2020, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  62. Experimental and computational investigation on dynamic fracture toughness (J) behavior of multi-pass SMA armor steel weldments

    Article • Theoretical and Applied Fracture Mechanics, April 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  63. Microstructure and Mechanical Behaviour of Al/SiC/Agro-Waste RHA Hybrid Metal Matrix Composite

    Article • Revue des composites et des matériaux avancés, March 2020, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  64. Utilization of Groundnut Shell as Reinforcement in Development of Aluminum Based Composite to Reduce Environment Pollution: a review

    Article • Evergreen, March 2020, Japan Society of Ski Sciences

    Prof (Dr.) Ashish Kumar Srivastava

  65. Assessment of mechanical properties and EDM machinability on Al6063/SiC MMC produced by stir casting

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  66. Development of duralumin alloy and its microstructural characterization by using grain refiner

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  67. Experimental observations of elements of surface integrity during conventional turning of commercial pure titanium

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  68. Experimental study on hardness and fatigue behavior in joining of AA5083 and AA6063 by friction stir welding

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  69. Machining and thermal behaviour of thermal power plant waste reinforced composite material

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  70. Methodology for GD&T verification in an innovative benchmark part for contactless scanning systems

    Article • FME Transaction, January 2020, Centre for Evaluation in Education and Science (CEON/CEES)

    Prof (Dr.) Ashish Kumar Srivastava

  71. Microstructure and mechanical behaviour of Al/SiC/Al2O3 hybrid metal matrix composite

    Article • Materials Today Proceedings, January 2020, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  72. Utilization of Chrome Containing Leather Waste in Development of Aluminium Based Green Composite Material

    Article • International Journal of Precision Engineering and Manufacturing-Green Technology, December 2019, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  73. Microstructure and Mechanical Properties of Al 6061/Al2O3/Fly-Ash Composite Fabricated Through Stir Casting

    Article • European Journal of Control, November 2019, International Information and Engineering Technology Association

    Prof (Dr.) Ashish Kumar Srivastava

  74. Metal matrix composites- a review on synthesis and characterization

    Article • IOP Conference Series Materials Science and Engineering, November 2019, Institute of Physics Publishing

    Prof (Dr.) Ashish Kumar Srivastava

  75. Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique

    Article • Materials Today Proceedings, September 2019, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  76. Surface integrity in wire-EDM tangential turning of in situ hybrid metal matrix composite A359/B4C/Al2O3

    Article • Science and Engineering of Composite Materials, January 2019, De Gruyter

    Prof (Dr.) Ashish Kumar Srivastava

  77. Hardness measurement of surfaces on hybrid metal matrix composite created by turning using an abrasive water jet and WED

    Article • Measurement, January 2019, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  78. Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite

    Article • September 2018, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  79. Parametric investigation on abrasive waterjet machining of alumina ceramic using response surface methodology

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Prof (Dr.) Ashish Kumar Srivastava

  80. Statistical Optimization of Wire-EDM During Processing of Hybrid MMC

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2018, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr Samuel Ratna Kumar P S, Prof (Dr.) Ashish Kumar Srivastava

  81. A Description of Surfaces Created on the Hybrid MMC by the AWJ Cutting Technology

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2018, Transstellar Journal Publications and Research Consultancy Private Limited

    Prof (Dr.) Ashish Kumar Srivastava

  82. Processing of alumina ceramics by abrasive waterjet- an experimental study

    Article • Materials Today Proceedings, January 2018, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  83. Surface Integrity analysis of Wire-EDM on in-situ hybrid composite A359/Al2O3/B4C

    Article • Materials Today Proceedings, January 2018, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  84. Effect of Water Pressure During Abrasive Waterjet Machining of Mg-Based Nanocomposite

    Article • November 2017, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  85. Influence of Abrasive Water Jet Turning Parameters on Variation of Diameter of Hybrid Metal Matrix Composite

    Article • November 2017, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  86. Hybrid aluminium matrix composite AWJ turning using olivine and Barton garnet

    Article • The International Journal of Advanced Manufacturing Technology, September 2017, Springer Science + Business Media

    Prof (Dr.) Ashish Kumar Srivastava

  87. Surface integrity in tangential turning of hybrid MMC A359/B4C/Al2O3 by abrasive waterjet

    Article • Journal of Manufacturing Processes, August 2017, Elsevier

    Prof (Dr.) Ashish Kumar Srivastava

  88. A review on the intensification of metal matrix composites and its nonconventional machining

    Article • Science and Engineering of Composite Materials, January 2016, De Gruyter

    Prof (Dr.) Ashish Kumar Srivastava

  89. An energy efficient framework for detection and monitoring of forest fire using mobile agent in wireless sensor networks

    Article • December 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Prof (Dr.) Ashish Kumar Srivastava