Contact

All Stories

  1. Multi-objective parameter optimization for four-stroke single-cylinder diesel engine with soyabean oil blends using NSGA-II

    Article • Engineering Research Express, October 2023, Institute of Physics Publishing

    Dr. Deepak Chhabra

  2. Additive Manufacturing Requirements for Dental Implementation

    Article • September 2023, Taylor & Francis

    Dr. Deepak Chhabra

  3. Identification and Overcoming Key Challenges in the 3D Printing Revolution

    Article • September 2023, Taylor & Francis

    Dr. Deepak Chhabra

  4. Effect of Speed, Acceleration, and Jerk on Surface Roughness of FDM-Fabricated Parts

    Article • Journal of Materials Engineering and Performance, July 2023, Springer Science + Business Media

    Dr. Deepak Chhabra

  5. Digging DEEP: Futuristic building blocks of omni-channel healthcare supply chains resiliency using machine learning approach

    Article • Journal of Business Research, July 2023, Elsevier

    Dr. Deepak Chhabra, Dr Sunil Luthra

  6. Fabrication and analysis of ABS-HDPE-PC composite polymer filament used for FDM printing using hybrid algorithm

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), June 2023, Springer Science + Business Media

    Dr. Deepak Chhabra

  7. Environmental and economic management study of phase change material integrated bifacial photovoltaic thermal-greenhouse drying system: A thermal approach

    Article • Energy Conversion and Management, June 2023, Elsevier

    Dr. Deepak Chhabra

  8. Experimentation and optimization of phase change material integrated passive bifacial photovoltaic thermal greenhouse dryer

    Article • Solar Energy, June 2023, Elsevier

    Dr. Deepak Chhabra

  9. Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system

    Article • Materials Today Communications, June 2023, Elsevier

    Dr. Deepak Chhabra

  10. Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing

    Article • Rapid Prototyping Journal, May 2023, Emerald

    Dr. Deepak Chhabra

  11. Parametric topology optimization approach for sustainable development of customized orthotic appliances using additive manufacturing

    Article • Mechanics of Advanced Materials and Structures, May 2023, Taylor & Francis

    Dr. Deepak Chhabra

  12. Recent developments on photovoltaic thermal drying systems: a clean energy production

    Article • Clean Technologies and Environmental Policy, April 2023, Springer Science + Business Media

    Dr. Deepak Chhabra

  13. Optimization of endoglucanase-lipase-amylase enzyme consortium from Thermomyces lanuginosus VAPS25 using Multi-Objective genetic algorithm and their bio-deinking applications

    Article • Bioresource Technology, February 2023, Elsevier

    Dr. Deepak Chhabra

  14. Analysis of fused filament fabrication parameters for sliding wear performance of carbon reinforced polyamide composite material fabricated parts using a hybrid heuristic tool

    Article • Polymer Testing, January 2023, Elsevier

    Dr. Deepak Chhabra

  15. Piezo-beam Structure in a Pipe with Turbulent Flow as Energy Harvester: Mathematical Modeling and Simulation

    Article • Journal of The Institution of Engineers (India) Series D, December 2022, Springer Science + Business Media

    Dr. Deepak Chhabra

  16. 3D Printable NiTi Alloys for Biomedical Applications: A State of Art

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Deepak Chhabra

  17. Advanced 3D body scanning techniques and its clinical applications

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Deepak Chhabra

  18. Enhancing dimensional accuracy of small parts through modelling and parametric optimization of the FDM 3D printing process using GA-ANN

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Deepak Chhabra

  19. Practicing Topology Optimization Workflow for Structural Simulation and Customized Splint Fabrication

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Deepak Chhabra

  20. Topological Simulation to Recognize the Steady State Thermal Behavior of Customized Finger Splint

    Article • December 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Deepak Chhabra

  21. Adopting additive manufacturing as a cleaner fabrication framework for topologically optimized orthotic devices: Implications over sustainable rehabilitation

    Article • Cleaner Engineering and Technology, October 2022, Elsevier

    Dr. Deepak Chhabra

  22. Experimental investigations of electrical discharge micro-drilling for Mg-alloy and multi-response optimization using MOGA-ANN

    Article • CIRP Journal of Manufacturing Science and Technology, August 2022, Elsevier

    Dr. Deepak Chhabra

  23. Improved deinking and biobleaching efficiency of enzyme consortium from Thermomyces lanuginosus VAPS25 using genetic Algorithm-Artificial neural network based tools

    Article • Bioresource Technology, April 2022, Elsevier

    Dr. Deepak Chhabra

  24. Multi-Objective Optimization Through Machine Learning Modeling for Production of Xylooligosaccharides from Alkali-Pretreated Corn-Cob Xylan Via Enzymatic Hydrolysis

    Article • Indian Journal of Microbiology, August 2021, Springer Science + Business Media

    Dr. Deepak Chhabra

  25. A multi-objective hybrid machine learning approach-based optimization for enhanced biomass and bioactive phycobiliproteins production in Nostoc sp. CCC-403

    Article • Bioresource Technology, June 2021, Elsevier

    Dr. Deepak Chhabra

  26. Role of nanotechnology behind the success of mRNA vaccines for COVID-19

    Article • Nano Today, June 2021, Elsevier

    Dr. Deepak Chhabra

  27. Thermal performance and kinetic analysis of vermicelli drying inside a greenhouse for sustainable development

    Article • Sustainable Energy Technologies and Assessments, April 2021, Elsevier

    Dr. Deepak Chhabra

  28. Low-cost media engineering for phosphate and IAA production by Kosakonia pseudosacchari TCPS-4 using Multi-objective Genetic Algorithm (MOGA) statistical tool

    Article • 3 Biotech, March 2021, Springer Science + Business Media

    Dr. Deepak Chhabra

  29. 3D FDM Printable Polymer Composites and Polymer Nanocomposites: State of the Art

    Article • Journal of Nano- and Electronic Physics, January 2021, Sumy State University

    Dr. Deepak Chhabra

  30. Modeling and Optimization of Piezoelectric Energy Harvesting System Under Dynamic Loading

    Article • January 2021, Springer Science + Business Media

    Dr. Deepak Chhabra

  31. Optimization of FDM Printing Parameters for Surface Quality Improvement of Carbon Based Nylon (PA-CF) Composite Material Fabricated Parts Using Evolutionary Algorithm

    Article • Journal of Nano- and Electronic Physics, January 2021, Sumy State University

    Dr. Deepak Chhabra

  32. Effectiveness of gamification for the rehabilitation of neurodegenerative disorders

    Article • Chaos Solitons & Fractals, November 2020, Elsevier

    Dr. Deepak Chhabra

  33. Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvement

    Article • CIRP Journal of Manufacturing Science and Technology, November 2020, Elsevier

    Dr. Deepak Chhabra

  34. Environmental and economic sustainability of PVT drying system: A heat transfer approach

    Article • Environmental Progress & Sustainable Energy, October 2020, Wiley

    Dr. Deepak Chhabra

  35. 3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy

    Article • Resources Policy, October 2020, Elsevier

    Dr. Deepak Chhabra

  36. Phycobiliproteins from Anabaena variabilis CCC421 and its production enhancement strategies using combinatory evolutionary algorithm approach

    Article • Bioresource Technology, August 2020, Elsevier

    Dr. Deepak Chhabra

  37. Smart diagnostics devices through artificial intelligence and mechanobiological approaches

    Article • 3 Biotech, July 2020, Springer Science + Business Media

    Dr. Deepak Chhabra

  38. Effect of carbon black on mechanical properties of Al7075/Al2O3/B4C reinforced aluminum composite

    Article • Materials Today Proceedings, May 2020, Elsevier

    Dr. Deepak Chhabra

  39. Physical and mechanical characterization of nanoalumina filled resin based dental composites

    Article • Materials Today Proceedings, May 2020, Elsevier

    Dr. Deepak Chhabra

  40. Optimization of significant factors for improving compressive strength of ABS in Fused Deposition Modeling by using GA & RSM

    Article • IOP Conference Series Materials Science and Engineering, February 2020, Institute of Physics Publishing

    Dr. Deepak Chhabra

  41. Improved Pullulan Production and Process Optimization Using Novel GA–ANN and GA–ANFIS Hybrid Statistical Tools

    Article • Biomolecules, January 2020, MDPI AG

    Dr. Deepak Chhabra

  42. Quest for dexterous prospects in AI regulated arena: opportunities and challenges in healthcare

    Article • International Journal of Healthcare Technology and Management, January 2020, Inderscience Publishers

    Dr. Deepak Chhabra

  43. Modeling and analysis of significant process parameters of FDM 3D printer using ANFIS

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr. Deepak Chhabra

  44. Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr. Deepak Chhabra

  45. Multilevel algorithms and evolutionary hybrid tools for enhanced production of arginine deiminase from Pseudomonas furukawaii RS3

    Article • Bioresource Technology, October 2019, Elsevier

    Dr. Deepak Chhabra

  46. Experimental & Mathematical Modeling and Analysis of Piezoelectric Energy Harvesting With Dynamic Periodic Loading

    Article • International Journal of Recent Technology and Engineering (IJRTE), September 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr. Deepak Chhabra

  47. Efficacious Study of Specific Co-Creation Policies in the Healthcare Ecosystem

    Article • September 2019, IGI Global

    Dr. Deepak Chhabra

  48. Modeling and simulation of an open channel PEHF system for efficient PVDF energy harvesting

    Article • Mechanics of Advanced Materials and Structures, April 2019, Taylor & Francis

    Dr. Deepak Chhabra, Dinesh Yadav

  49. Quest for cardiovascular interventions: precise modeling and 3D printing of heart valves

    Article • Journal of Biological Engineering, February 2019, Springer Science + Business Media

    Dr. Deepak Chhabra

  50. Modeling and parametric optimization of FDM 3D printing process using hybrid techniques for enhancing dimensional preciseness

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), January 2019, Springer Science + Business Media

    Dr. Deepak Chhabra

  51. Green energy generation through PEHF – a blueprint of alternate energy harvesting

    Article • International Journal of Green Energy, January 2019, Taylor & Francis

    Dr. Deepak Chhabra, Dinesh Yadav

  52. Improved biobleaching of mixed hardwood pulp and process optimization using novel GA-ANN and GA-ANFIS hybrid statistical tools

    Article • Bioresource Technology, January 2019, Elsevier

    Dr. Deepak Chhabra

  53. Artificial Intelligence Integration for Neurodegenerative Disorders

    Article • January 2019, Elsevier

    Dr. Deepak Chhabra

  54. Futuristic biosensors for cardiac health care: an artificial intelligence approach

    Article • 3 Biotech, August 2018, Springer Science + Business Media

    Dr. Deepak Chhabra

  55. Integrated Artificial Intelligence Approaches for Disease Diagnostics

    Article • Indian Journal of Microbiology, February 2018, Springer Science + Business Media

    Dr. Deepak Chhabra

  56. Experimental Investigations of Piezoelectric Energy Harvesting with Turbulent Flow

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2018, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr. Deepak Chhabra

  57. Xylanase production from Thermomyces lanuginosus VAPS-24 using low cost agro-industrial residues via hybrid optimization tools and its potential use for saccharification

    Article • Bioresource Technology, November 2017, Elsevier

    Dr. Deepak Chhabra

  58. Optimal placement of piezoelectric actuators on plate structures for active vibration control via modified control matrix and singular value decomposition approach using modified heuristic genetic algorithm

    Article • Mechanics of Advanced Materials and Structures, October 2015, Taylor & Francis

    Dr. Deepak Chhabra

  59. Active Vibration Control of the Smart Plate Using Artificial Neural Network Controller

    Article • Advances in Aerospace Engineering, January 2015, Hindawi Publishing Corporation

    Dr. Deepak Chhabra

  60. Multilevel optimization for the placement of piezo-actuators on plate structures for active vibration control using modified heuristic genetic algorithm

    Article • March 2014, SPIE

    Dr. Deepak Chhabra

  61. Optimal placement of piezoelectric actuators on plate structures for active vibration control using genetic algorithm

    Article • March 2014, SPIE

    Dr. Deepak Chhabra

  62. Optimization of Collocated/Noncollocated Sensors and Actuators along with Feedback Gain Using Hybrid Multiobjective Genetic Algorithm-Artificial Neural Network

    Article • Chinese Journal of Engineering, January 2014, Hindawi Publishing Corporation

    Dr. Deepak Chhabra