All Stories

  1. Microneedle System for Transdermal Drug and Vaccine Delivery: Devices, Safety, and Prospects

    Article • Dose-Response, October 2019, SAGE Publications

    Professor Daming Wu

  2. Efficient preparation of PDMS-based conductive composites using self-designed automatic equipment and an application example

    Article • Journal of Polymer Engineering, September 2019, De Gruyter

    Jingyao Sun, Professor Daming Wu

  3. Tailoring the electrical and thermal conductivity of multi-component and multi-phase polymer composites

    Article • International Materials Reviews, March 2019, Taylor & Francis

    Professor Chris R Bowen, Professor Daming Wu

  4. A mathematical model for predicting conductivity of polymer composites with a forced assembly network obtained by SCFNA method

    Article • Polymer Composites, August 2018, Wiley

    Professor Daming Wu, Jingyao Sun

  5. Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly

    Article • Journal of Materials Science, June 2018, Springer Science + Business Media

    Professor Daming Wu

  6. Nanofiller Reinforced Biodegradable PLA/PHA Composites: Current Status and Future Trends

    Article • Polymers, May 2018, MDPI AG

    Professor Daming Wu

  7. Biomimetic Moth-eye Nanofabrication: Enhanced Antireflection with Superior Self-cleaning Characteristic

    Article • Scientific Reports, April 2018, Springer Science + Business Media

    Professor Daming Wu

  8. Polydimethylsiloxane/aluminum oxide composites prepared by spatial confining forced network assembly for heat conduction and dissipation

    Article • RSC Advances, January 2018, Royal Society of Chemistry

    Professor Daming Wu

  9. An enhansed electeic conductivity of CPCs up to 4 orders.

    Article • Composites Part A Applied Science and Manufacturing, November 2017, Elsevier

    Professor Daming Wu

  10. Thermal dissipation performance of metal-polymer composite heat exchanger with V-shape microgrooves: A numerical and experimental study

    Article • Applied Thermal Engineering, July 2017, Elsevier

    Professor Daming Wu

  11. hot embossing with a short cycle time (20 seconds)

    Article • Polymer Engineering & Science, June 2017, Wiley

    Professor Daming Wu, Jingyao Sun

  12. Rheological dependence of polypropylene melt through a micro die

    Article • Polymer Testing, May 2017, Elsevier

    Professor Daming Wu

  13. Numerical simulation and experimental study of filling process of micro prism by isothermal hot embossing in solid-like state

    Article • Advances in Polymer Technology, March 2017, Wiley

    Professor Daming Wu

  14. The research of soft matter properties by light scattering material adding drop additive

    Article • Science and Engineering of Composite Materials, January 2017, De Gruyter

    Ben Xu, Professor Daming Wu

  15. Increasing conductivity by forced assembly networking and bolting cloth

    Article • RSC Advances, January 2017, Royal Society of Chemistry

    Professor Daming Wu

  16. Comparisons of the rheological behaviors of polypropylene and polymethyl methacrylate in a capillary die

    Article • Journal of Applied Polymer Science, November 2016, Wiley

    Professor Daming Wu

  17. Fast way of replicating micro-nano structures by hot embossing

    Article • Polymer Engineering & Science, August 2016, Wiley

    Professor Daming Wu

  18. Influence of factors on heat dissipation performance of composite metal–polymer heat exchanger with rectangular microstructure

    Article • Applied Thermal Engineering, June 2016, Elsevier

    Professor Daming Wu

  19. Experimental investigation of the rheological behaviors of polypropylene in a capillary flow

    Article • Journal of Applied Polymer Science, February 2016, Wiley

    Professor Daming Wu

  20. NUMERICAL SIMULATION OF METAL-PLASTIC COMPOSITE HEAT RADIATOR WITH HEMISPHERICAL MICROSTRUCTURE ARRAY

    Article • Frontiers in Heat and Mass Transfer, November 2015, Global Digital Central

    Professor Daming Wu

  21. Preparation of polymeric superhydrophobic surfaces and analysis of their wettability

    Article • Heat and Mass Transfer, February 2015, Springer Science + Business Media

    Professor Daming Wu

  22. Quantitative Analysis of Factors Influencing Heat Dissipation in a Metal-Plastic Composite Heat Radiator with a Hemispherical Microstructure Array

    Article • Mathematical Problems in Engineering, January 2015, Hindawi Publishing Corporation

    Professor Daming Wu

  23. Study of mapping relationship between surface micro-defect and haze of polycarbonate plate

    Article • International Journal of Simulation and Process Modelling, January 2015, Inderscience Publishers

    Professor Daming Wu

  24. The Polymerization of MMA and ST to Prepare Material with Gradient Refractive Index in Electric Field

    Article • Advances in Materials Science and Engineering, January 2015, Hindawi Publishing Corporation

    Professor Daming Wu

  25. Preparation and Mechanical Properties of Layered Double Hydrotalcides/ /Polystyrene Nanocomposites Prepared by an in-situ Bubble Stretching Method

    Article • Materials Science, December 2014, Publishing House Technologija

    Professor Daming Wu

  26. Investigation on optical property of diffuser with 3D microstructures

    Article • Optik, December 2014, Elsevier

    Professor Daming Wu

  27. Effect of surface tension on filling flow of carboxymethyl cellulose solution in microchannel

    Article • Materials Research Innovations, May 2014, Taylor & Francis

    Professor Daming Wu

  28. Visualization experiments on extrudate swell behavior at the microscale

    Article • Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanoengineering and Nanosystems, April 2014, SAGE Publications

    Professor Daming Wu

  29. Effects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection Molding

    Article • Key Engineering Materials, April 2014, Trans Tech Publications

    Professor Daming Wu

  30. Research of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection Molding

    Article • Key Engineering Materials, April 2014, Trans Tech Publications

    Professor Daming Wu

  31. Electrically conductive and super-tough polypropylene/carbon nanotube nanocomposites prepared by melt compounding

    Article • Composites Part B Engineering, January 2014, Elsevier

    Professor Daming Wu

  32. Artificial environment and the structure of gradient soft matter

    Article • Chemical Physics Letters, November 2013, Elsevier

    Professor Daming Wu

  33. Study on the Reflecting Properties of HFHIPS

    Article • Advanced Materials Research, October 2013, Trans Tech Publications

    Professor Daming Wu

  34. Design of Diffuse Reflection Composites and Study on Reflectivity Properties

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Daming Wu

  35. Light Distribution Design on Different LED Lamp

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Daming Wu

  36. Preparation and Testing of the Microstructure Diffuse Reflection Plate Based on the Continuous Extrusion

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor Daming Wu

  37. Research of Heat Transfer Performance on Tablet Microstructure Heat Exchanger Used for LED Lamps

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor Daming Wu

  38. Design of the Diffuse Reflector Cup with Microstructure and the Research on the Optical Performance

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor Daming Wu

  39. The Design of the Polymer Diffuse Material with Microstructure and the Research of the Reflection Properties of Materials

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Daming Wu

  40. The Mechanism of Quasi-Dynamic Expansion Method and the Design of the Equipment for Manufacturing Biaxial Oriented PVC Pipes

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor Daming Wu

  41. The Method of Improving Precision of Micro Injection Molding Machine Temperature Control

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor Daming Wu

  42. An Investigation into the Influencing Factors for Polymer Melt at the Filling Stage in Micro Injection Molding

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Daming Wu

  43. Design and Simulation Analysis of a New Type of Micro Metal-Plastic Heat Radiator

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Daming Wu

  44. Influence of Light Scattering Particles on Optical Properties of Polymer Diffusion Plate

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Daming Wu

  45. The Experiment Measuring Method of Polymer Melt Bulk Modulus by PVT Principle

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Daming Wu

  46. Effect of the Light Diffuser Plate of Micro V-Cut Prism Structure on the Optical Property of LED Daylight Lamp

    Article • Advanced Materials Research, June 2013, Trans Tech Publications

    Professor Daming Wu

  47. Research on the Key Technology in Ultra-Precision Machining of Optical Micro V-Groove Mold Roller

    Article • Advanced Materials Research, June 2013, Trans Tech Publications

    Professor Daming Wu

  48. Study on the Heat Transfer Performance of Two Kinds Material for Microstructure Heat Exchanger

    Article • Advanced Materials Research, June 2013, Trans Tech Publications

    Professor Daming Wu

  49. The Research on Structure Design of LED Fluorescent Lamp Microstructures Diffuser and the Effect on the Optical Properties

    Article • Advanced Materials Research, June 2013, Trans Tech Publications

    Professor Daming Wu

  50. Micro Injection Molding and Strength Check of Polymer Micro-Needle

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor Daming Wu

  51. Investigation on Transmittance and Uniformity of Light Diffuser Plate of Filling Coefficient of Microstructure

    Article • Advanced Materials Research, April 2013, Trans Tech Publications

    Professor Daming Wu

  52. Analysis of the Influence of Bar-Defects to Warping of PMMA Products

    Article • Applied Mechanics and Materials, January 2013, Trans Tech Publications

    Professor Daming Wu

  53. Microstructure and Wear Properties of TiC/Fe-Based Composite Coating Prepared by PTA Weld-Surfacing Process

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Professor Daming Wu

  54. The Mechanism of Quasi-Dynamic Expansion Method and the Design of the Equipment for Manufacturing Biaxial Oriented PVC Pipes

    Article • Applied Mechanics and Materials, December 2012, Trans Tech Publications

    Professor Daming Wu

  55. Study on the Reflecting Properties of PET Composites with TiO2, Glass Beads and Fluorescent Brightener

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Professor Daming Wu

  56. A Universal Reduced Rupture Creep Approach for Prediction of Long Term Failure Behavior of Aged Glass Polymers from the Short Term Test of Rupture Creep Compliance by the Unified Master Curved Extrapolation

    Article • Chinese Journal of Chemical Physics, October 2012, American Institute of Physics

    Professor Daming Wu

  57. Design and Analysis of Micro Plastic Heat Exchanger

    Article • Advanced Materials Research, August 2012, Trans Tech Publications

    Professor Daming Wu

  58. Preparation of Super Hydrophobic Surfaces by the Stainless Steel Wire Mesh as Templates

    Article • Advanced Materials Research, August 2012, Trans Tech Publications

    Professor Daming Wu

  59. Experimental Study of Rheological Characteristics of Polymer Melts in the Micro-Die

    Article • Advanced Materials Research, July 2012, Trans Tech Publications

    Professor Daming Wu

  60. Study of the Orientation Detection of PVC-O Pipe by Rayleigh Waves

    Article • Advanced Materials Research, July 2012, Trans Tech Publications

    Professor Daming Wu

  61. The Simulation Analysis of the Forming Process of Polymer Microlens during Roll-to-Roll Hot Imprint Process

    Article • Advanced Materials Research, July 2012, Trans Tech Publications

    Professor Daming Wu

  62. Effect of Micro Structures of Diffusers on Optical Properties of LED Light

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Professor Daming Wu

  63. Effects of Different Package Structures on Thermal Properties of High Power White LED

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Professor Daming Wu

  64. Investigation on Transmittance and Uniformity of Light Diffuser Plate of Scattering Optical Transmission Polymer

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Professor Daming Wu

  65. Optimal Design of Micro Plastic Heat Radiator

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Professor Daming Wu

  66. Simulation of Injection Molding of Ultra-Thin Light Guide Plate with Hemispherical Microstructures

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Professor Daming Wu

  67. Research of Precision Injection Control System Based on the on-Line Measurement of Polymer Melt Density

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Professor Daming Wu

  68. Electrical and dielectric properties of polypropylene nanocomposites based on carbon nanotubes and barium titanate nanoparticles

    Article • Composites Science and Technology, October 2011, Elsevier

    Professor Daming Wu

  69. The Research of the Extrusion Hot Embossing Process

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Professor Daming Wu

  70. Effect of Aspect Ratio of Micro Sphere Lens Arrays on the Optical Property of Diffuser

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Professor Daming Wu

  71. Fabrication of the polymer diffuser with surface microstructures by using the extrusion roller embossing process

    Article • July 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Daming Wu

  72. The research about ingredient of biaxial orientation pipe and the online detection of orientation by ultrasonic

    Article • July 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Daming Wu

  73. Designing Experiment Platform for Micro Heat Exchangers

    Article • Key Engineering Materials, June 2011, Trans Tech Publications

    Professor Daming Wu

  74. Design of a diffuser plate with micro-structures for direct type LED backlight

    Article • April 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Daming Wu

  75. Approach to improve the injection weight repeatability accuracy in the process of the precision injection molding

    Article • April 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Daming Wu

  76. Correlation of cooperatively localized rearrangement on the “fluidized domain” in glass substances (or polymers) to their fragility III: Theory of dynamic fragility at isochoric state

    Article • Science China Physics Mechanics and Astronomy, March 2011, Springer Science + Business Media

    Professor Daming Wu

  77. Research on Measurement Method for Polymer Melt Bulk Modulus of Elasticity

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Daming Wu

  78. Optimization and Design of LCD Diffuser Plate with Micro-Semisphere Structure

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Daming Wu

  79. Application of ultrasonic measurement technology in polymer precision injection molding processing

    Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Daming Wu

  80. Correlation of Cooperatively Localized Rearrangement on the “Fluidized Domain" of Polymers to Their Nonexponentially Viscoelastic Behavior and Lifetime at Double Aging Processes II: Estimation of Long-term Mechanical Behavior and Lifetime of Polymeric ...

    Article • Chinese Journal of Chemical Physics, April 2010, American Institute of Physics

    Professor Daming Wu

  81. Correlation of Cooperatively Localized Rearrangement on the “Fluidized Domain" of Polymers to Their Nonexponentially Viscoelastic Behaviors at Double Aging Processes (I): A Set of Reduced Universal Equations on the Stress Relaxation Modulus and Creep C...

    Article • Chinese Journal of Chemical Physics, February 2010, American Institute of Physics

    Professor Daming Wu

  82. Study of Solid-plug Conveying in a Centrifugal Extruder

    Article • International Polymer Processing, July 2008, Carl Hanser Verlag

    Professor Daming Wu

  83. Study of oriented polyvinyl chloride pipes by inner-pressing expansion

    Article • Advances in Polymer Technology, June 2008, Wiley

    Professor Daming Wu

  84. Dynamic Theory of Die Swell for Entangled Polymeric Liquids in Tube Extrusion: Correlations of Total and Ultimate Extrudate Swell Effects to Growth Time, Shear Stress and Aspect Ratio Under the Free States

    Article • Chinese Journal of Chemical Physics, February 2008, American Institute of Physics

    Professor Daming Wu

  85. Dynamic Theory of Die Swell for Entangled Polymeric Liquids in Tube Extrusions: New Set of Equations for the Growth and Ultimate Extrudate Swelling Ratios under the Free States

    Article • Chinese Journal of Chemical Physics, October 2007, American Institute of Physics

    Professor Daming Wu

  86. Mechanical properties of low-density polyethylene/nano-magnesium hydroxide composites prepared by an in situ bubble stretching method

    Article • Journal of Polymer Research, September 2007, Springer Science + Business Media

    Professor Daming Wu

  87. OSCILLATION PROCESS OF BUBBLE IN POLYMERS

    Article • International Journal of Modern Physics B, July 2006, World Scientific Pub Co Pte Lt

    Professor Daming Wu

  88. A study of bubble inflation in polymers and its applications

    Article • Physics Letters A, June 2004, Elsevier

    Professor Daming Wu

  89. In situ bubble-stretching dispersion mechanism for additives in polymers

    Article • Journal of Polymer Science Part B Polymer Physics, May 2003, Wiley

    Professor Daming Wu