Contact

All Stories

  1. Quantitative analysis of dribble volumes and rates using three-dimensional reconstruction of X-ray and diffused back-illumination images of diesel sprays

    Article • International Journal of Engine Research, July 2019, SAGE Publications

    Professor Raul Payri, Prof. Cyril Crua

  2. Effect of the scale resolution on the two phase coupling characteristics of high speed evaporating sprays using LES / Eulerian-Lagrangian methodologies

    Article • International Journal of Multiphase Flow, June 2019, Elsevier

    Prof. Cyril Crua

  3. Change of evaporation rate of single monocomponent droplet with temperature using time-resolved phase rainbow refractometry

    Article • Proceedings of the Combustion Institute, January 2019, Elsevier

    Prof. Cyril Crua

  4. Temperature measurements under diesel engine conditions using laser induced grating spectroscopy

    Article • Combustion and Flame, January 2019, Elsevier

    Prof. Cyril Crua

  5. Investigation of Puffing and Micro-Explosion of Water-in-Diesel Emulsion Spray Using Shadow Imaging

    Article • Energies, August 2018, MDPI AG

    Prof. Cyril Crua

  6. Simultaneous measurement of monocomponent droplet temperature/refractive index, size and evaporation rate with phase rainbow refractometry

    Article • Journal of Quantitative Spectroscopy and Radiative Transfer, July 2018, Elsevier

    Prof. Cyril Crua

  7. The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions

    Article • Applied Energy, July 2018, Elsevier

    Prof. Cyril Crua

  8. The Effect of Fuel Injection Equipment of Water-In-Diesel Emulsions on Micro-Explosion Behaviour

    Article • Energies, June 2018, MDPI AG

    Prof. Cyril Crua

  9. On the transcritical mixing of fuels at diesel engine conditions

    Article • Fuel, November 2017, Elsevier

    Prof. Cyril Crua

  10. Time-resolved gas thermometry by laser-induced grating spectroscopy with a high-repetition rate laser system

    Article • Experiments in Fluids, June 2017, Springer Science + Business Media

    Prof. Cyril Crua

  11. Mathematical modelling of heating and evaporation of a spheroidal droplet

    Article • International Journal of Heat and Mass Transfer, May 2017, Elsevier

    Prof. Cyril Crua

  12. A model for droplet heating and its implementation into ANSYS Fluent

    Article • International Communications in Heat and Mass Transfer, August 2016, Elsevier

    Prof. Cyril Crua

  13. Aerodynamical phenomena in a large top covered wind mill with vertical axis wind turbine

    Article • International Journal of Numerical Methods for Heat &amp Fluid Flow, January 2016, Emerald

    Prof. Cyril Crua

  14. Designing and Demonstrating a Master Student Project To Explore Carbon Dioxide Capture Technology

    Article • Journal of Chemical Education, December 2015, American Chemical Society (ACS)

    Prof. Cyril Crua, Dr habilited Sébastien Leveneur, Alain LEDOUX

  15. Modelling of gasoline fuel droplets heating and evaporation

    Article • Fuel, November 2015, Elsevier

    Prof. Cyril Crua

  16. Microscopic imaging of the initial stage of diesel spray formation

    Article • Fuel, October 2015, Elsevier

    Prof. Cyril Crua

  17. Modelling of biodiesel fuel droplet heating and evaporation: Effects of fuel composition

    Article • Fuel, August 2015, Elsevier

    Prof. Cyril Crua

  18. Thermal risk assessment of vegetable oil epoxidation

    Article • Journal of Thermal Analysis and Calorimetry, June 2015, Springer Science + Business Media

    Prof. Cyril Crua, Dr habilited Sébastien Leveneur

  19. Time-resolved fuel injector flow characterisation based on 3D laser Doppler vibrometry

    Article • Measurement Science and Technology, October 2014, Institute of Physics Publishing

    Prof. Cyril Crua

  20. Jet and Vortex Ring-Like Structures in Internal Combustion Engines: Stability Analysis and Analytical Solutions

    Article • Procedia IUTAM, January 2013, Elsevier

    Prof. Cyril Crua

  21. A breakup model for transient Diesel fuel sprays

    Article • Fuel, July 2012, Elsevier

    Prof. Cyril Crua

  22. Tools and Techniques for Intelligent Characterization of Fuels

    Article • January 2011, Springer Science + Business Media

    Prof. Cyril Crua

  23. High-Speed Microscopic Imaging of the Initial Stage of Diesel Spray Formation and Primary Breakup

    Article • October 2010, SAE International

    Prof. Cyril Crua

  24. Laser-Induced Fluorescence Investigation of Nitric Oxide Formation and Hydroxyl Radicals in a Diesel Rapid Compression Machine

    Article • May 2010, SAE International

    Prof. Cyril Crua

  25. Grouping and trapping of evaporating droplets in an oscillating gas flow

    Article • International Journal of Heat and Fluid Flow, April 2008, Elsevier

    Prof. Cyril Crua

  26. Diesel fuel spray penetration, heating, evaporation and ignition: modelling vs. experimentation

    Article • International Journal of Engineering Systems Modelling and Simulation, January 2008, Inderscience Publishers

    Prof. Cyril Crua

  27. The effect of compression ratio on exhaust emissions from a PCCI diesel engine

    Article • Energy Conversion and Management, November 2007, Elsevier

    Prof. Cyril Crua

  28. MODELING AND CONTROL OF INTERNAL COMBUSTION ENGINES USING INTELLIGENT TECHNIQUES

    Article • Cybernetics & Systems, June 2007, Taylor & Francis

    Prof. Cyril Crua

  29. Fuzzy Logic and Neuro-fuzzy Modelling of Diesel Spray Penetration

    Article • January 2005, Springer Science + Business Media

    Prof. Cyril Crua

  30. Diesel autogignition at elevated in-cylinder pressueres

    Article • International Journal of Engine Research, August 2004, SAGE Publications

    Prof. Cyril Crua

  31. Laser-induced incandescence study of diesel soot formation in a rapid compression machine at elevated pressures

    Article • Combustion and Flame, December 2003, Elsevier

    Prof. Cyril Crua

  32. Characterisation of the Soot Formation Processes in a High Pressure Combusting Diesel Fuel Spray

    Article • October 2003, SAE International

    Prof. Cyril Crua

  33. PDA Characterisation of Dense Diesel Sprays Using a Common-Rail Injection System

    Article • October 2003, SAE International

    Prof. Cyril Crua

  34. The initial stage of fuel spray penetration☆

    Article • Fuel, May 2003, Elsevier

    Prof. Cyril Crua

  35. In-Cylinder Penetration and Break-Up of Diesel Sprays Using a Common-Rail Injection System

    Article • May 2002, SAE International

    Prof. Cyril Crua

  36. Article • Flow Turbulence and Combustion, January 2002, Springer Science + Business Media

    Prof. Cyril Crua

  37. The Influence of Injector Parameters on the Formation and Break-Up of a Diesel Spray

    Article • March 2001, SAE International

    Prof. Cyril Crua