All Stories

  1. An improved approach for the evaluation of the environmental impact of nano‐modified insulating oils in electrical transformers
  2. Investigation of home appliances industry and devices obsolescence considering energy consumption
  3. Failure causes and operational life of measuring transformers installed in 150 kV and 400 kV transmission network
  4. Liquid-solid interface diffusion behaviors of furfural in the insulation systems of natural ester-cellulose paper and mineral oil-cellulose paper
  5. Impact Assessment of Photovoltaic Panels with Life Cycle Analysis Techniques
  6. “3R” Practices Focused on Home Appliances Sector in Terms of Green Consumerism: Principles, Technical Dimensions, and Future Challenges
  7. Life Cycle Assessment applied to waste-to-energy technologies
  8. Active Autonomous Open-Loop Technique for Static and Dynamic Current Balancing of Parallel-Connected Silicon Carbide MOSFETs
  9. Microclimate Changes Due to the Operation of Energy Infrastructures
  10. Ecodesign for Industrial Furnaces and Ovens: A Review of the Current Environmental Legislation
  11. OpenEdgePMU: An Open PMU Architecture with Edge Processing for Future Resilient Smart Grids
  12. Advances in Industrial Waste Reduction
  13. Condition Assessment of Power Transformers through DGA Measurements Evaluation Using Adaptive Algorithms and Deep Learning
  14. Failure mapping and critical measurements for the operating condition assessment of power transformers
  15. Design of a Supraharmonic Monitoring System Based on an FPGA Device
  16. Active Auto-Suppression Current Unbalance Technique for Parallel-Connected Silicon Carbide MOSFETs
  17. Potentially recyclable and hazardous materials produced by recycling European distribution transformers at the end of life in the years 2020-2030
  18. Microgrids protection schemes, challenges and strategies
  19. A Novel ILP Formulation for PCB Maintenance Considering Electrical Measurements and Aging Factors: A “Right to Repair” Approach
  20. Supraharmonic emission from a three-phase PV system connected to the LV grid
  21. The role of energy recovery from wastes in the decarbonization efforts of the EU power sector
  22. A Binary Integer Programming Method for Optimal Wind Turbines Allocation
  23. Brushed DC Motor Drives for Industrial and Automobile Applications with Emphasis on Control Techniques: A Comprehensive Review
  24. An Insight into Ingredients of Toxicological Interest in Personal Care Products and A Small–Scale Sampling Survey of the Greek Market: Delineating a Potential Contamination Source for Water Resources
  25. Sustainable second-generation biofuel production potential in a developing country case study
  26. Investigating the Correlation of Purchase Power Parity (PPP) with the Adopted Waste Management Method in EU28
  27. A Review of the Potential for the Recovery of Wind Turbine Blade Waste Materials
  28. Study and analysis on EVs penetration scenarios based in prognostic tools
  29. Evaluating the energy demand for municipal solid wastes treatment facilities: A critical approach toward sustainable development
  30. Current balancing techniques of parallel-connected silicon carbide MOSFETs: A review
  31. A review on the latest trend of Solar Pavements in Urban Environment
  32. Crete – Peloponnese 150kV AC Interconnection. Simulation Results for Transient Phenomena in Main Switches
  33. Demand Response schemes in Energy Hubs: A comparison study
  34. Maximum Power Photovoltaic Units Penetration under Voltage Constraints Criteria in Distribution Network Using Probabilistic Load Flow
  35. Sustainable Energy Harvesting through Triboelectric Nano – Generators: A Review of current status and applications
  36. Wind turbine blade composite materials - End of life treatment methods
  37. Detection of transient signals based on the tricepstrum
  38. The Recycling Potential of Submersible Sewage Pumps in the EU
  39. Recycling potential for low voltage and high voltage high rupturing capacity fuse links
  40. A step by step selection method for the location and the size of a waste-to-energy facility targeting the maximum output energy and minimization of gate fee
  41. Implementing the EcoDesign Directive in distribution transformers: First impacts review
  42. WTE plants installed in European cities: a review of success stories
  43. Modern μcontroller implementation for interfacing and driving a 3-dimensional computer numerical control machine
  44. Use of waste derived fuels in cement industry: a review
  45. A Comparative Evaluation of Photovoltaic Electricity Production Assessment Software (PVGIS, PVWatts and RETScreen)
  46. The Combustion of As-received and Pre-processed (RDF/SRF) Municipal Solid Wastes as Fuel for the Power Sector
  47. An Evaluation of Standby Losses Effect in Power Demand in Greek Urban Households
  48. Electricity Distribution Network efficiency
  49. Residue Derived Fuels as an Alternative Fuel for the Hellenic Power Generation Sector and their Potential for Emissions ReductionConstantinos S. Psomopoulos
  50. Implementing the Ecodesign directive in distribution transformers. first impacts
  51. The Role of Waste to Energy Facilities in the Power Sector of EU
  52. Experimental and theoretical investigation of harmonic distortion in high voltage 3-phase transformers
  53. Dissolved gas analysis for the evaluation of the corrosive sulphur activity in oil insulated power transformers
  54. Experimental and theoretical investigation of the harmonic distortion in the 600V urban railways system of Athens
  55. The Contribution of Dissolved Gas Analysis as a Diagnostic Tool for the Evaluation of the Corrosive Sulphur activity in Oil Insulated Traction Transformers
  56. Experimental investigation on the fusion of thin wire elements exposed in air and silicon oxide granules environments
  57. The Power of Design: Product Innovation in Sustainable Energy Technologies. Edited by Angèle Reinders, Jan Carel Diehl, and Han Brezet
  58. Solar Energy: Harvesting the Sun’s Energy for Sustainable Future
  59. Testing wind variable speed driving systems for conducted interferences
  60. Investigation of the Possibility of Energy Saving in dc Motor Drive Systems in the Hellenic Territory: Methodology & Early Results
  61. Electricity savings and CO2 emissions reduction in buildings sector: How important the network losses are in the calculation?
  62. Waste-to-energy: A review of the status and benefits in USA
  63. Experimental investigation of the fusion in cylindrical exploding wires using high current densities with industrial frequency
  64. A MODEL OF ELECTRICAL CONTACTS WITH ADVANCED DEGRADATION
  65. Measurement of fusible elements during current interruption and interpretation of related phenomena
  66. Temperature distribution of fuse elements during the pre-arcing period
  67. An Evaluation Method for the Prediction of the Maximum Remaining Life of Measuring Transformers in 150Kv Power Systems
  68. Statistical Treatment of Insulation Failure Data With The Application of Simplified Regression Method in The High-Voltage Laboratory
  69. A theoretic and experimental investigation in stationary electric contacts
  70. Potential measurements on electric contacts
  71. Electricity Production from Small-Scale Photovoltaics in Urban Areas
  72. Temperature effects on partial discharges in the combined system of a solid-liquid dielectric during lightning impulse voltage
  73. Free electron energy during the aging of an organic dielectric under switching impulse voltages
  74. Partial discharges in solid insulators-an experimental investigation
  75. Electricity Production from Small-Scale Photovoltaics in Urban Areas