All Stories

  1. 9.4T Magnetic Resonance Imaging of the Mouse Circle of Willis Enables Serial Characterization of Flow-Induced Vascular Remodeling by Computational Fluid Dynamics
  2. Implementation of material decomposition using an EMCCD and CMOS-based micro-CT system
  3. 3D printed abdominal aortic aneurysm phantom for image guided surgical planning with a patient specific fenestrated endovascular graft system
  4. Design optimization for accurate flow simulations in 3D printed vascular phantoms derived from computed tomography angiography
  5. Initial simulated FFR investigation using flow measurements in patient- specific 3D printed coronary phantoms
  6. Three-dimensional printing of MRI-visible phantoms and MR image-guided therapy simulation
  7. 3D printed cardiac phantom for procedural planning of a transcatheter native mitral valve replacement
  8. Focal spot deblurring for high resolution direct conversion x-ray detectors
  9. Investigation of signal thresholding to reduce the effects of instrument noise of an EMCCD based micro-CT system
  10. Investigation of noise and contrast sensitivity of an electron multiplying charge-coupled device (EMCCD) based cone beam micro-CT system
  11. Advanced 3D mesh manipulation in stereolithographic files and post-print processing for the manufacturing of patient-specific vascular flow phantoms
  12. Assessment of Vascular Geometry for Bilateral Carotid Artery Ligation to Induce Early Basilar Terminus Aneurysmal Remodeling in Rats
  13. Time-Resolved Neurovascular 2D X-Ray Imaging
  14. 108 Spatially Different Temporal Filtering With X-Ray Attenuator
  15. Three-dimensional printing to facilitate anatomic study, device development, simulation, and planning in thoracic surgery
  16. Initial testing of a 3D printed perfusion phantom using digital subtraction angiography
  17. Angiographic analysis for phantom simulations of endovascular aneurysm treatments with a new fully retrievable asymmetric flow diverter
  18. Stent retriever thrombectomy with the Cover accessory device versus proximal protection with a balloon guide catheter: in vitro stroke model comparison
  19. Manufacturing Patient-Specific Phantoms to Treat Aneurysms Using Rotational Angiography and 3-D Modeling
  20. Material Defects in Ceramic Crowns Identification by Optical Coherence Tomography and MicroCT
  21. Primary stentriever versus combined stentriever plus aspiration thrombectomy approaches: in vitro stroke model comparison
  22. Detector system comparison using relative CNR for specific imaging tasks related to neuro-endovascular image-guided interventions (neuro-EIGIs)
  23. Effect of injection technique on temporal parametric imaging derived from digital subtraction angiography in patient specific phantoms
  24. Challenges and limitations of patient-specific vascular phantom fabrication using 3D Polyjet printing
  25. Evaluation of embolic deflection devices using optical particle tracking
  26. Dose reduction in fluoroscopic interventions using a combination of a region of interest (ROI) x-ray attenuator and spatially different, temporally variable temporal filtering
  27. Image acquisition, geometric correction and display of images from a 2x2 x-ray detector array based on electron multiplying charge coupled device (EMCCD) technology
  28. Quantitative analysis of an enlarged area solid state x-ray image intensifier (SSXII) detector based on electron multiplying charge coupled device (EMCCD) technology
  29. Design considerations for a new high resolution Micro-Angiographic Fluoroscope based on a CMOS sensor (MAF-CMOS)
  30. Signal characteristics study of continuous scintillator CCD-based single photon counting (SPC) detector
  31. Development of a small animal SPECT and CT dual function imager with a microcolumnar CsI(Tl) and CCD based detector
  32. Development and assessment of statistical iterative image reconstruction for CT on a small animal SPECT/CT dual-modality system
  33. Investigation of metrics to assess vascular flow modifications for diverter device designs using hydrodynamics and angiographic studies
  34. Evaluation of intracranial aneurysm coil embolization in phantoms and patients using a high resolution microangiographic fluoroscope (MAF)
  35. Region-of-interest micro-angiographic fluoroscope detector used in aneurysm and artery stenosis diagnoses and treatment
  36. Endovascular coil embolization of a very small ruptured aneurysm using a novel microangiographic technique: technical note
  37. Optical investigations of various polymeric materials used in dental technology
  38. Ceramic and polymeric dental onlays evaluated by photo-elasticity, optical coherence tomography, and micro-computed tomography
  39. Biomedical implications of dental-ceramic defects investigated by numerical simulation, radiographic, microcomputer tomography, and time-domain optical coherence tomography
  40. Erratum: “A theoretical and experimental evaluation of the microangiographic fluoroscope: A high-resolution region-of-interest x-ray imager” [Med. Phys. 38, 4112-4126 (2011)]
  41. Evaluation of a Second-Generation Self-Expanding Variable-Porosity Flow Diverter in a Rabbit Elastase Aneurysm Model
  42. A theoretical and experimental evaluation of the microangiographic fluoroscope: A high-resolution region-of-interest x-ray imager
  43. Imagistic evaluation of direct dental restoration: en face OCT versus SEM and microCT
  44. Early characterization of occlusal overloaded cervical dental hard tissues by en face optical coherence tomography
  45. Use of the Micro-angiographic Fluoroscope for Coiling of Intracranial Aneurysms
  46. SEM and microCT validation for en face OCT imagistic evaluation of endodontically treated human teeth
  47. Study of stent deployment mechanics using a high-resolution x-ray imaging detector
  48. Angiographic imaging evaluation of patient-specific bifurcation-aneurysm phantom treatment with pre-shaped, self-expanding, flow-diverting stents: feasibility study
  49. Graphical user interface for a dual-module EMCCD x-ray detector array
  50. Early characterization of occlusal overloaded cervical dental hard tissues by en face optical coherence tomography
  51. Radiographic, microcomputer tomography, and optical coherence tomography investigations of ceramic interfaces
  52. Root canal filling evaluation using optical coherence tomography
  53. Morphological characterization of dental prostheses interfaces using optical coherence tomography
  54. Assessment of contrast flow modification in aneurysms treated with closed-cell self-deploying asymmetric vascular stents (SAVS)
  55. Analysis of dental abfractions by optical coherence tomography
  56. Radiographic, Micro Computer Tomography and Optical Coherence Tomography Investigations of Ceramic Interfaces
  57. Partially polyurethane-covered stent for cerebral aneurysm treatment
  58. Angiographic analysis of animal model aneurysms treated with novel polyurethane asymmetric vascular stent (P-AVS): feasibility study
  59. The Asymmetric Vascular Stent: Efficacy in a Rabbit Aneurysm Model
  60. Asymmetric Vascular Stent: Feasibility Study of a New Low-Porosity Patch-Containing Stent
  61. Evaluation of guidewire path reproducibility
  62. Evaluation of the effect of partial asymmetric stent coverage on neurovascular aneurysm hemodynamics using computer fluid dynamics (CFD) calculations
  63. Cone-Beam Micro-CT System Based on LabVIEW Software
  64. Flow modification in canine intracranial aneurysm model by an asymmetric stent: studies using digital subtraction angiography (DSA) and image-based computational fluid dynamics (CFD) analyses
  65. Evaluation of an asymmetric stent patch design for a patient specific intracranial aneurysm using computational fluid dynamic (CFD) calculations in the computed tomography (CT) derived lumen
  66. New light-amplifier-based detector designs for high spatial resolution and high sensitivity CBCT mammography and fluoroscopy
  67. Experimental comparison of cone beam CT (CBCT) reconstruction and multiview reconstruction (MVR) for microangiography (MA) detector system
  68. New microangiography system development providing improved small vessel imaging, increased contrast-to-noise ratios, and multiview 3D reconstructions
  69. Microangiographic image-guided localization of a new asymmetric stent for treatment of cerebral aneurysms
  70. Particle image velocimetry (PIV) evaluation of flow modification in aneurysm phantoms using asymmetric stents
  71. Angiographic analysis of blood flow modification in cerebral aneurysm models with a new asymmetric stent
  72. Micro-angiographic detector with fluoroscopic capability