Professor Chong Soo Lee

All Stories

1. 
   Enhanced kinetics of microstructural evolution in Ti–6Al–4V through electropulsing treatment

   Article • Journal of Materials Research and Technology, September 2023, Elsevier

   Professor Chong Soo Lee

2. 
   The astonishing effect of Si addition on low-cycle fatigue life in a metastable high-entropy alloy

   Article • Materials Science and Engineering A, July 2023, Elsevier

   Professor Chong Soo Lee

3. 
   Hetero-Deformation Induced Hardening in a CoCrFeNiMn High-Entropy Alloy

   Article • Crystals, May 2023, MDPI AG

   Professor Chong Soo Lee

4. 
   Heterogeneous-structured Ti-6Al-4V with enhanced mechanical properties in monotonic and cyclic deformation modes

   Article • Journal of Materials Research and Technology, January 2023, Elsevier

   Professor Chong Soo Lee

5. 
   Increasing the resistance to hydrogen embrittlement in martensitic steel by partial phase transformation and tempering

   Article • Materials Science and Engineering A, October 2022, Elsevier

   Professor Chong Soo Lee

6. 
   Low-cycle fatigue behavior and surface treatment of a twinning-induced plasticity high-entropy alloy

   Article • Materials Science and Engineering A, September 2022, Elsevier

   Professor Chong Soo Lee

7. 
   Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel

   Article • Materials Science and Engineering A, July 2022, Elsevier

   Professor Chong Soo Lee

8. 
   Origin of superior low-cycle fatigue resistance of an interstitial metastable high-entropy alloy

   Article • Journal of Material Science and Technology, July 2022, Elsevier

   Professor Chong Soo Lee

9. 
   Publisher Correction: Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy

   Article • Nature Communications, February 2022, Springer Science + Business Media

   Professor Chong Soo Lee

10. 
    Comparative study of tensile and high-cycle fatigue properties of extruded AZ91 and AZ91–0.3Ca–0.2Y alloys

    Article • Journal of Material Science and Technology, December 2021, Elsevier

    Professor Chong Soo Lee

11. 
    Microstructural evolution and mechanical properties of nanocrystalline Fe–Mn–Al–C steel processed by high-pressure torsion

    Article • Materials Science and Engineering A, October 2021, Elsevier

    Professor Chong Soo Lee

12. 
    Effect of type-C liquid metal embrittlement on mechanical properties of spot-welded TRIP steel

    Article • Journal of Materials Research and Technology, July 2021, Elsevier

    Professor Chong Soo Lee

13. 
    Effect of bainite fraction on hydrogen embrittlement of bainite/martensite steel

    Article • Materials Science and Engineering A, May 2021, Elsevier

    Professor Chong Soo Lee

14. 
    Effect of tempering duration on hydrogen embrittlement of vanadium-added tempered martensitic steel

    Article • International Journal of Hydrogen Energy, May 2021, Elsevier

    Professor Chong Soo Lee

15. 
    Effect of grain size on the low-cycle fatigue behavior of carbon-containing high-entropy alloys

    Article • Materials Science and Engineering A, April 2021, Elsevier

    Professor Chong Soo Lee

16. 
    Tailoring Extra-Strength of a TWIP Steel by Combination of Multi-Pass Equal-Channel Angular Pressing and Warm Rolling

    Article • Metals, March 2021, MDPI AG

    Professor Chong Soo Lee

17. 
    Effect of Type-B liquid metal embrittlement cracks on high-cycle fatigue properties of spot-welded 1180 TRIP steel

    Article • Science and Technology of Welding & Joining, January 2021, Taylor & Francis

    Professor Chong Soo Lee

18. 
    Enhancing low-cycle fatigue life of commercially-pure Ti by deformation at cryogenic temperature

    Article • Materials Science and Engineering A, January 2021, Elsevier

    Professor Chong Soo Lee

19. 
    Graded Grain Structure to Improve Hydrogen-Embrittlement Resistance of TWIP Steel

    Article • Crystals, November 2020, MDPI AG

    Professor Chong Soo Lee

20. 
    Constitutive Analysis of the Anisotropic Flow Behavior of Commercially Pure Titanium

    Article • Applied Sciences, November 2020, MDPI AG

    Professor Chong Soo Lee

21. 
    Microstructural Influence on Stretch Flangeability of Ferrite–Martensite Dual-Phase Steels

    Article • Crystals, November 2020, MDPI AG

    Professor Chong Soo Lee

22. 
    Effect of V/Mo ratio on the evolution of carbide precipitates and hydrogen embrittlement of tempered martensitic steel

    Article • Corrosion Science, November 2020, Elsevier

    Professor Chong Soo Lee

23. 
    Recent Development in Micromanufacturing of Metallic Materials

    Article • Materials, September 2020, MDPI AG

    Professor Chong Soo Lee

24. 
    Low-cycle fatigue properties of CoCrFeMnNi high-entropy alloy compared with its conventional counterparts

    Article • Materials Science and Engineering A, August 2020, Elsevier

    Professor Chong Soo Lee

25. 
    Influence of Microstructure on Low-Cycle and Extremely-Low-Cycle Fatigue Resistance of Low-Carbon Steels

    Article • Metals and Materials International, July 2020, Springer Science + Business Media

    Professor Chong Soo Lee

26. 
    Effect of undissolved Nb carbides on mechanical properties of hydrogen-precharged tempered martensitic steel

    Article • Scientific Reports, July 2020, Springer Science + Business Media

    Professor Chong Soo Lee

27. 
    Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy

    Article • Nature Communications, June 2020, Springer Science + Business Media

    Professor Chong Soo Lee

28. 
    Ambivalent Role of Annealing in Tensile Properties of Step-Rolled Ti-6Al-4V with Ultrafine-Grained Structure

    Article • Metals, May 2020, MDPI AG

    Professor Chong Soo Lee

29. 
    The role of ultrasonic nanocrystalline surface modification at elevated temperature on the hydrogen charging behavior of high-Mn steels

    Article • Materialia, March 2020, Elsevier

    Professor Chong Soo Lee

30. 
    Orientation Dependence on Plastic Flow Behavior of Hydrogen-Precharged Micropillars of High-Mn Steel

    Article • Metals and Materials International, November 2019, Springer Science + Business Media

    Professor Chong Soo Lee

31. 
    Superplasticity of V10Cr15Mn5Fe35Co10Ni25 high-entropy alloy processed using high-pressure torsion

    Article • Materials Science and Engineering A, September 2019, Elsevier

    Professor Chong Soo Lee

32. 
    Hydrogen Embrittlement Behavior of 18Ni 300 Maraging Steel Produced by Selective Laser Melting

    Article • Materials, July 2019, MDPI AG

    Professor Chong Soo Lee

33. 
    Dynamic deformation behavior and microstructural evolution during high-speed rolling of Mg alloy having non-basal texture

    Article • Journal of Material Science and Technology, April 2019, Elsevier

    Professor Chong Soo Lee

34. 
    Comparative study on the effects of Cr, V, and Mo carbides for hydrogen-embrittlement resistance of tempered martensitic steel

    Article • Scientific Reports, March 2019, Springer Science + Business Media

    Professor Chong Soo Lee

35. 
    Simultaneous Improvement in the Strength and Formability of Commercially Pure Titanium via Twinning-induced Crystallographic Texture Control

    Article • Scientific Reports, February 2019, Springer Science + Business Media

    Professor Chong Soo Lee

36. 
    High strain-rate superplasticity of AZ91 alloy achieved by rapidly solidified flaky powder metallurgy

    Article • Materials Letters, January 2019, Elsevier

    Professor Chong Soo Lee

37. 
    Improved cold-rollability of duplex lightweight steels utilizing deformation-induced ferritic transformation

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Professor Chong Soo Lee

38. 
    A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes

    Article • International Journal of Plasticity, December 2018, Elsevier

    Dr Youngung Jeong, Professor Chong Soo Lee

39. 
    Dynamic recrystallization behavior and microstructural evolution of Mg alloy AZ31 through high-speed rolling

    Article • Journal of Material Science and Technology, October 2018, Elsevier

    Professor Chong Soo Lee

40. 
    Effect of grain boundary engineering on hydrogen embrittlement in Fe-Mn-C TWIP steel at various strain rates

    Article • Corrosion Science, September 2018, Elsevier

    Professor Chong Soo Lee

41. 
    Ultrahigh-strength CoCrFeMnNi high-entropy alloy wire rod with excellent resistance to hydrogen embrittlement

    Article • Materials Science and Engineering A, August 2018, Elsevier

    Professor Chong Soo Lee

42. 
    Enhancing Superplasticity of Ultrafine-Grained Ti-6Al-4V without Imposing Severe Plastic Deformation

    Article • Advanced Engineering Materials, June 2018, Wiley

    Professor Chong Soo Lee

43. 
    Influence of hydrogen on the grain boundary crack propagation in bcc iron: A molecular dynamics simulation

    Article • Computational Materials Science, June 2018, Elsevier

    Professor Chong Soo Lee

44. 
    Grain boundary engineering approach to improve hydrogen embrittlement resistance in Fe Mn C TWIP steel

    Article • International Journal of Hydrogen Energy, May 2018, Elsevier

    Professor Chong Soo Lee

45. 
    Effects of carbon content on the tensile and fatigue properties in hydrogen-charged Fe-17Mn-xC steels: The opposing trends

    Article • Materials Science and Engineering A, May 2018, Elsevier

    Professor Chong Soo Lee

46. 
    Correction to: Structure and Stoichiometry of MgxZny in Hot-Dipped Zn–Mg–Al Coating Layer on Interstitial-Free Steel

    Article • Metals and Materials International, April 2018, Springer Science + Business Media

    Professor Chong Soo Lee

47. 
    Structure and Stoichiometry of MgxZny in Hot-Dipped Zn–Mg–Al Coating Layer on Interstitial-Free Steel

    Article • Metals and Materials International, March 2018, Springer Science + Business Media

    Professor Chong Soo Lee

48. 
    Coarsening kinetics of primary alpha in a near alpha titanium alloy

    Article • Journal of Alloys and Compounds, February 2018, Elsevier

    Professor Chong Soo Lee

49. 
    Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties

    Article • Metals and Materials International, January 2018, Springer Science + Business Media

    Professor Chong Soo Lee

50. 
    Effects of drawing strain and post-annealing conditions on microstructural evolution and tensile properties of medium- and high-carbon steels

    Article • Metals and Materials International, November 2017, Springer Science + Business Media

    Professor Chong Soo Lee

51. 
    Event-triggered proportional-derivative control for nonlinear network systems with a novel event-triggering scheme: Differential of triggered state consideration

    Article • Advances in Mechanical Engineering, September 2017, SAGE Publications

    Prof. Sangmoon Lee, Professor Chong Soo Lee

52. 
    Enhanced Resistance to Delayed Cracking in Deep-drawn Lean Duplex Stainless Steel: the Role of Residual Stress

    Article • Korean Journal of Metals and Materials, August 2017, The Korean Institute of Metals and Materials

    Professor Chong Soo Lee

53. 
    Anisotropic in-plane fatigue behavior of rolled magnesium alloy with {10−12} twins

    Article • Materials Science and Engineering A, July 2017, Elsevier

    Professor Chong Soo Lee

54. 
    Increased resistance to hydrogen embrittlement in high-strength steels composed of granular bainite

    Article • Materials Science and Engineering A, July 2017, Elsevier

    Professor Chong Soo Lee

55. 
    Anisotropic twinning and slip behaviors and their relative activities in rolled alpha-phase titanium

    Article • Materials Science and Engineering A, June 2017, Elsevier

    Professor Chong Soo Lee

56. 
    Effect of the amount and temperature of prestrain on tensile and low-cycle fatigue properties of Fe-17Mn-0.5C TRIP/TWIP steel

    Article • Materials Science and Engineering A, June 2017, Elsevier

    Professor Chong Soo Lee

57. 
    Relationship between mechanical properties and high-cycle fatigue strength of medium-carbon steels

    Article • Materials Science and Engineering A, April 2017, Elsevier

    Professor Chong Soo Lee

58. 
    Mechanism of Martensitic to Equiaxed Microstructure Evolution during Hot Deformation of a Near-Alpha Ti Alloy

    Article • Metallurgical and Materials Transactions A, March 2017, Springer Science + Business Media

    Professor Chong Soo Lee

59. 
    Multicriteria Adaptive Observers for Singular Systems with Unknown Time-Varying Parameters

    Article • Mathematical Problems in Engineering, January 2017, Hindawi Publishing Corporation

    Professor Chong Soo Lee

60. 
    Effects of pre-tension on fatigue behavior of rolled magnesium alloy

    Article • Materials Science and Engineering A, January 2017, Elsevier

    Professor Chong Soo Lee

61. 
    Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steels

    Article • Materials Science and Engineering A, November 2016, Elsevier

    Professor Chong Soo Lee

62. 
    Anisotropy in twinning characteristics and texture evolution of rolling textured high purity alpha phase titanium

    Article • Journal of Alloys and Compounds, October 2016, Elsevier

    Professor Chong Soo Lee

63. 
    Role of deformation twins in static recrystallization kinetics of high-purity alpha titanium

    Article • Metals and Materials International, August 2016, Springer Science + Business Media

    Professor Chong Soo Lee

64. 
    Homogeneity of Microstructure and Mechanical Properties of Ultrafine Grained OFHC Cu Bars Processed by ECAP

    Article • Korean Journal of Metals and Materials, June 2016, The Korean Institute of Metals and Materials

    Professor Chong Soo Lee

65. 
    Influence of loading direction on the anisotropic fatigue properties of rolled magnesium alloy

    Article • International Journal of Fatigue, June 2016, Elsevier

    Professor Chong Soo Lee

66. 
    High Temperature Deformation Behavior and Microstructure Evolution of Ti-4Al-4Fe-0.25Si Alloy

    Article • Korean Journal of Metals and Materials, May 2016, The Korean Institute of Metals and Materials

    Professor Chong Soo Lee

67. 
    Effects of vanadium carbides on hydrogen embrittlement of tempered martensitic steel

    Article • Metals and Materials International, April 2016, Springer Science + Business Media

    Professor Chong Soo Lee

68. 
    Enhancing high-cycle fatigue properties of cold-drawn Fe–Mn–C TWIP steels

    Article • International Journal of Fatigue, April 2016, Elsevier

    Professor Chong Soo Lee

69. 
    Nanoscale graphene coating on commercially pure titanium for accelerated bone regeneration

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Chong Soo Lee

70. 
    Deformation anisotropy and associated mechanisms in rolling textured high purity titanium

    Article • Journal of Alloys and Compounds, December 2015, Elsevier

    Professor Chong Soo Lee

71. 
    Microstructure and deformation behavior of Ti-10V-2Fe-3Al alloy during hot forming process

    Article • Journal of Wuhan University of Technology-Mater Sci Ed, December 2015, Springer Science + Business Media

    Professor Chong Soo Lee

72. 
    Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti–13Nb–13Zr

    Article • Materials Science and Engineering A, November 2015, Elsevier

    Professor Chong Soo Lee

73. 
    Tribological and corrosion behaviors of warm- and hot-rolled Ti-13Nb-13Zr alloys in simulated body fluid conditions

    Article • International Journal of Nanomedicine, October 2015, Dove Medical Press

    Dr GEETHA MANIVASAGAM, Professor Chong Soo Lee

74. 
    Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys

    Article • Computational Materials Science, September 2015, Elsevier

    Professor Chong Soo Lee

75. 
    Anisotropic yielding behavior of rolling textured high purity titanium

    Article • Materials Science and Engineering A, June 2015, Elsevier

    Professor Chong Soo Lee

76. 
    Role of Cu on hydrogen embrittlement behavior in Fe–Mn–C–Cu TWIP steel

    Article • International Journal of Hydrogen Energy, June 2015, Elsevier

    Professor Chong Soo Lee

77. 
    Manufacturing Ultrafine-Grained Ti-6Al-4V Bulk Rod Using Multi-Pass Caliber-Rolling

    Article • Metals, May 2015, MDPI AG

    Professor Chong Soo Lee

78. 
    Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental Applications

    Article • ACS Applied Materials & Interfaces, May 2015, American Chemical Society (ACS)

    Professor Chong Soo Lee

79. 
    Abnormal texture evolution of rolled Mg–3Al–1Zn alloy containing initial {10-12} twins

    Article • Scripta Materialia, April 2015, Elsevier

    Professor Chong Soo Lee

80. 
    Effect of Si and Ce Addition on the Microstructure and Pitting Corrosion Resistance of Hyper-Duplex Stainless Steels

    Article • CORROSION, April 2015, NACE International

    Professor Chong Soo Lee

81. 
    Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method

    Article • Computational Materials Science, April 2015, Elsevier

    Professor Chong Soo Lee

82. 
    이종수 HE-1

    Article • Corrosion Reviews, January 2015, De Gruyter

    Professor Chong Soo Lee

83. 
    Phase transformation and its effect on mechanical characteristics in warm-deformed Ti-29Nb-13Ta-4.6Zr alloy

    Article • Metals and Materials International, January 2015, Springer Science + Business Media

    Professor Chong Soo Lee

84. 
    Enhancing yield strength by suppressing detwinning in a rolled Mg–3Al–1Zn alloy with {101¯...

    Article • Materials Science and Engineering A, December 2014, Elsevier

    Professor Chong Soo Lee

85. 
    Laser, tungsten inert gas, and metal active gas welding of DP780 steel: Comparison of hardness, tensile properties and fatigue resistance

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Professor Chong Soo Lee

86. 
    Enhanced low-cycle fatigue life by pre-straining in an Fe-17Mn-0.8C twinning induced plasticity steel

    Article • Metals and Materials International, November 2014, Springer Science + Business Media

    Professor Chong Soo Lee

87. 
    Integrated constitutive model for flow behavior of pure Titanium considering interstitial solute concentration

    Article • Metals and Materials International, November 2014, Springer Science + Business Media

    Professor Chong Soo Lee

88. 
    Role of rolling temperature in the precipitation hardening characteristics of Ti–Mo microalloyed hot-rolled high strength steel

    Article • Materials Science and Engineering A, October 2014, Elsevier

    Professor Chong Soo Lee

89. 
    Analysis on dynamic tensile extrusion behavior of UFG OFHC Cu

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Professor Chong Soo Lee

90. 
    Space-holder effect on designing pore structure and determining mechanical properties in porous titanium

    Article • Materials & Design (1980-2015), May 2014, Elsevier

    Professor Chong Soo Lee

91. 
    Effects of rolling temperature on the microstructure and mechanical properties of Ti–Mo microalloyed hot-rolled high strength steel

    Article • Materials Science and Engineering A, May 2014, Elsevier

    Professor Chong Soo Lee

92. 
    Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels

    Article • Corrosion Science, May 2014, Elsevier

    Professor Chong Soo Lee

93. 
    Effects of deformation parameters on formation of pro-eutectoid cementite in hypereutectoid steels

    Article • Journal of Central South University, April 2014, Springer Science + Business Media

    Professor Chong Soo Lee

94. 
    Hollow cone high-pressure torsion: Microstructure and tensile strength by unique severe plastic deformation

    Article • Scripta Materialia, January 2014, Elsevier

    Professor Chong Soo Lee

95. 
    Effects of dynamic recrystallisation during deep rolling of semisolid slab and heat treatment on microstructure and properties of AZ31 alloy

    Article • Materials Science and Technology, December 2013, Taylor & Francis

    Professor Chong Soo Lee

96. 
    Microstructure tailoring to enhance strength and ductility in Ti–13Nb–13Zr for biomedical applications

    Article • Scripta Materialia, December 2013, Elsevier

    Professor Chong Soo Lee

97. 
    Analysis of stress states in compression stage of high pressure torsion using slab analysis method and finite element method

    Article • Metals and Materials International, September 2013, Springer Science + Business Media

    Professor Chong Soo Lee

98. 
    Boundary layer and cooling rate and microstructure formation on the cooling sloping plate

    Article • Metals and Materials International, September 2013, Springer Science + Business Media

    Professor Chong Soo Lee

99. 
    Microstructure formation mechanism and properties of AZ61 alloy processed by melt treatment with vibrating cooling slope and semisolid rolling

    Article • Metals and Materials International, September 2013, Springer Science + Business Media

    Professor Chong Soo Lee

100. 
     Temperature distribution and its influence on microstructure of alloy AZ31 during semisolid rheo-rolling process

     Article • International Journal of Cast Metals Research, August 2013, Maney Publishing

     Professor Chong Soo Lee

101. 
     Effects of tungsten on continuous cooling transformation characteristics of microalloyed steels

     Article • Materials & Design (1980-2015), August 2013, Elsevier

     Professor Chong Soo Lee

102. 
     Enhanced stretch formability of rolled Mg–3Al–1Zn alloy at room temperature by initial {10–12} twins

     Article • Materials Science and Engineering A, August 2013, Elsevier

     Professor Chong Soo Lee

103. 
     Grain refinement effect on cryogenic tensile ductility in a Fe–Mn–C twinning-induced plasticity steel

     Article • Materials & Design (1980-2015), August 2013, Elsevier

     Professor Chong Soo Lee

104. 
     Effect of Ce addition on secondary phase transformation and mechanical properties of 27Cr–7Ni hyper duplex stainless steels

     Article • Materials Science and Engineering A, June 2013, Elsevier

     Professor Chong Soo Lee

105. 
     Formation of a submicrocrystalline structure in a two-phase titanium alloy without severe plastic deformation

     Article • Scripta Materialia, June 2013, Elsevier

     Professor Chong Soo Lee

106. 
     Effect of Texture and {10-12} Twin on the Low Cycle Fatigue Properties of Rolled AZ31 Mg Alloy

     Article • Korean Journal of Metals and Materials, May 2013, The Korean Institute of Metals and Materials

     Professor Chong Soo Lee

107. 
     Microstructure evolution during novel rheorolling process for producing A356 alloy strip

     Article • Materials Science and Technology, May 2013, Taylor & Francis

     Professor Chong Soo Lee

108. 
     Dynamic tensile extrusion behavior of coarse grained and ultrafine grained OFHC Cu

     Article • Materials Science and Engineering A, May 2013, Elsevier

     Professor Chong Soo Lee

109. 
     Enhancing impact fracture toughness and tensile properties of a microalloyed cast steel by hot forging and post-forging heat treatment processes

     Article • Materials & Design (1980-2015), May 2013, Elsevier

     Professor Chong Soo Lee

110. 
     In-plane anisotropic deformation behavior of rolled Mg–3Al–1Zn alloy by initial {10–12} twins

     Article • Materials Science and Engineering A, May 2013, Elsevier

     Professor Chong Soo Lee

111. 
     Effects of Tungsten Addition on the Microstructure and Mechanical Properties of Microalloyed Forging Steels

     Article • Metallurgical and Materials Transactions A, March 2013, Springer Science + Business Media

     Professor Chong Soo Lee

112. 
     A Novel Semisolid Rheo-Rolling Process of AZ31 Alloy with Vibrating Sloping Plate

     Article • Materials and Manufacturing Processes, March 2013, Taylor & Francis

     Professor Chong Soo Lee

113. 
     Development of Ti and Mo micro-alloyed hot-rolled high strength sheet steel by controlling thermomechanical controlled processing schedule

     Article • Materials Science and Engineering A, March 2013, Elsevier

     Professor Chong Soo Lee

114. 
     Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels

     Article • Materials Science and Engineering A, February 2013, Elsevier

     Professor Chong Soo Lee

115. 
     Internal-variable analysis of high-temperature deformation behavior of Ti–6Al–4V: A comparative study of the strain-rate-jump and load-relaxation tests

     Article • Materials Science and Engineering A, February 2013, Elsevier

     Professor Chong Soo Lee

116. 
     Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment

     Article • Materials Science and Engineering A, January 2013, Elsevier

     Professor Chong Soo Lee

117. 
     Microstructure and properties of Mg–3Sn–1Mn (wt%) alloy processed by a novel continuous shearing and rolling and heat treatment

     Article • Materials Science and Engineering A, January 2013, Elsevier

     Professor Chong Soo Lee

118. 
     Microstructure formation mechanism and properties of a Mg-3Sn-1Mn (wt%) magnesium alloy processed by a novel semisolid continuous shearing and rolling process

     Article • Metals and Materials International, January 2013, Springer Science + Business Media

     Professor Chong Soo Lee

119. 
     Process Design Strategies for Producing Heavy Section Steel with Improved Quality

     Article • Advanced Materials Research, January 2013, Trans Tech Publications

     Professor Chong Soo Lee

120. 
     Shear band formation during hot compression of AZ31 Mg alloy sheets

     Article • Materials Science and Engineering A, December 2012, Elsevier

     Professor Chong Soo Lee

121. 
     Hardness and microstructure of interstitial free steels in the early stage of high-pressure torsion

     Article • Journal of Materials Science, November 2012, Springer Science + Business Media

     Professor Chong Soo Lee

122. 
     Effect of aluminium on hydrogen-induced fracture behaviour in austenitic Fe-Mn-C steel

     Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, November 2012, Royal Society Publishing

     Professor Chong Soo Lee

123. 
     Effect of the casting temperature on temperature field and microstructure of A2017 alloy during an innovative continuous semisolid rolling process with a vibrating sloping plate device

     Article • The International Journal of Advanced Manufacturing Technology, October 2012, Springer Science + Business Media

     Professor Chong Soo Lee

124. 
     Caliber-rolled TWIP steel for high-strength wire rods with enhanced hydrogen-delayed fracture resistance

     Article • Scripta Materialia, October 2012, Elsevier

     Professor Chong Soo Lee

125. 
     Effects of process parameters on microstructure and properties of AZ91 alloy prepared by cooling/stirring and rolling process

     Article • International Journal of Cast Metals Research, August 2012, Maney Publishing

     Professor Chong Soo Lee

126. 
     High-cycle fatigue characteristics of non-heat-treated steels developed for bolt applications

     Article • Materials Science and Engineering A, July 2012, Elsevier

     Professor Chong Soo Lee

127. 
     Hydrogen Embrittlement Behavior of 430 and 445NF Ferritic Stainless Steels

     Article • Metallurgical and Materials Transactions A, June 2012, Springer Science + Business Media

     Professor Chong Soo Lee

128. 
     Delayed static failure of twinning-induced plasticity steels

     Article • Scripta Materialia, June 2012, Elsevier

     Professor Chong Soo Lee

129. 
     Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel

     Article • Acta Materialia, June 2012, Elsevier

     Professor Chong Soo Lee

130. 
     Mechanisms of tensile improvement in caliber-rolled high-carbon steel

     Article • Metals and Materials International, June 2012, Springer Science + Business Media

     Professor Chong Soo Lee

131. 
     Microstructure evolution and properties of Mg–3Sn–1Mn (wt%) alloy strip processed by semisolid rheo-rolling

     Article • Journal of Materials Processing Technology, June 2012, Elsevier

     Professor Chong Soo Lee

132. 
     The mechanism of enhanced resistance to the hydrogen delayed fracture in Al-added Fe–18Mn–0.6C twinning-induced plasticity steels

     Article • International Journal of Hydrogen Energy, June 2012, Elsevier

     Professor Chong Soo Lee

133. 
     Tensile deformation behavior of Fe–Mn–C TWIP steel with ultrafine elongated grain structure

     Article • Materials Letters, May 2012, Elsevier

     Professor Chong Soo Lee

134. 
     Effect of microstructure on deformation behavior of Ti–6Al–4V alloy during compressing process

     Article • Materials & Design (1980-2015), April 2012, Elsevier

     Professor Chong Soo Lee

135. 
     Effect of tungsten addition on the mechanical properties and corrosion resistance of S355NL forging steel

     Article • Metals and Materials International, April 2012, Springer Science + Business Media

     Professor Chong Soo Lee

136. 
     Multiple twinning modes in rolled Mg–3Al–1Zn alloy and their selection mechanism

     Article • Materials Science and Engineering A, January 2012, Elsevier

     Professor Chong Soo Lee

137. 
     Potential of ultrafine grained materials as high performance penetrator materials

     Article • EPJ Web of Conferences, January 2012, EDP Sciences

     Professor Chong Soo Lee

138. 
     Role of ɛ martensite in tensile properties and hydrogen degradation of high-Mn steels

     Article • Materials Science and Engineering A, January 2012, Elsevier

     Professor Chong Soo Lee

139. 
     Constitutive analysis of compressive deformation behavior of ELI-grade Ti–6Al–4V with different microstructures

     Article • Journal of Materials Science, December 2011, Springer Science + Business Media

     Professor Chong Soo Lee

140. 
     Mechanisms and Kinetics of Static Spheroidization of Hot-Worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a Lamellar Microstructure

     Article • Metallurgical and Materials Transactions A, November 2011, Springer Science + Business Media

     Professor Chong Soo Lee

141. 
     Effect of Wavelike Sloping Plate Rheocasting on Microstructures of Hypereutectic Al-18 pct Si-5 pct Fe Alloys

     Article • Metallurgical and Materials Transactions B, November 2011, Springer Science + Business Media

     Professor Chong Soo Lee

142. 
     Work hardening associated with ɛ-martensitic transformation, deformation twinning and dynamic strain aging in Fe–17Mn–0.6C and Fe–17Mn–0.8C TWIP steels

     Article • Materials Science and Engineering A, September 2011, Elsevier

     Professor Chong Soo Lee

143. 
     Characterization of the interface heat transfer coefficient during non-isothermal bulk forming of Ti–6Al–4 V alloy

     Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, August 2011, SAGE Publications

     Professor Chong Soo Lee

144. 
     Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbides

     Article • Materials Science and Engineering A, August 2011, Elsevier

     Professor Chong Soo Lee

145. 
     Surface structures and osteoblast response of hydrothermally produced CaTiO3 thin film on Ti–13Nb–13Zr alloy

     Article • Applied Surface Science, June 2011, Elsevier

     Professor Chong Soo Lee

146. 
     Energy-based approach to predict the fatigue life behavior of pre-strained Fe–18Mn TWIP steel

     Article • Materials Science and Engineering A, May 2011, Elsevier

     Professor Chong Soo Lee

147. 
     Hydrogen Embrittlement of Low Carbon HSLA Steel during Slow Strain Rate Test

     Article • Advanced Materials Research, February 2011, Trans Tech Publications

     Professor Chong Soo Lee

148. 
     Static and Dynamic Deformation of Fully Austenitic High Mn Steels

     Article • Procedia Engineering, January 2011, Elsevier

     Professor Chong Soo Lee

149. 
     A unified constitutive model for quasi-static flow responses of pure Ta and Ta–W alloys

     Article • Materials Science and Engineering A, January 2011, Elsevier

     Professor Chong Soo Lee

150. 
     Microstructural Aspects during the Preparation of Y<SUB>3</SUB>Al<SUB>5</SUB>O<SUB>12</SUB> by Combustion Synthesis and Temperature Field Simulation

     Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

     Professor Chong Soo Lee

151. 
     Role of initial texture on the plastic anisotropy of Mg–3Al–1Zn alloy at various temperatures

     Article • Materials Science and Engineering A, January 2011, Elsevier

     Professor Chong Soo Lee

152. 
     Strain path dependence of {10−12} twinning activity in a polycrystalline magnesium alloy

     Article • Scripta Materialia, January 2011, Elsevier

     Professor Chong Soo Lee

153. 
     A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4V

     Article • Metallurgical and Materials Transactions A, December 2010, Springer Science + Business Media

     Professor Chong Soo Lee

154. 
     Improved pre-osteoblast response and mechanical compatibility of ultrafine-grained Ti-13Nb-13Zr alloy

     Article • Clinical Oral Implants Research, December 2010, Wiley

     Professor Chong Soo Lee

155. 
     Low-cycle fatigue characteristics of rolled Mg–3Al–1Zn alloy

     Article • International Journal of Fatigue, November 2010, Elsevier

     Professor Chong Soo Lee

156. 
     Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy

     Article • Acta Materialia, October 2010, Elsevier

     Professor Chong Soo Lee

157. 
     Enhanced mechanical compatibility of submicrocrystalline Ti–13Nb–13Zr alloy

     Article • Materials Science and Engineering A, July 2010, Elsevier

     Professor Chong Soo Lee

158. 
     Low-temperature superplasticity and coarsening behavior of Ti–6Al–2Sn–4Zr–2Mo–0.1Si

     Article • Materials Science and Engineering A, July 2010, Elsevier

     Professor Chong Soo Lee

159. 
     Effect of thermo hydrogen treatment on lattice defects and microstructure refinement of Ti6Al4V alloy

     Article • International Journal of Hydrogen Energy, June 2010, Elsevier

     Professor Chong Soo Lee

160. 
     Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al addition

     Article • Materials Science and Engineering A, June 2010, Elsevier

     Professor Chong Soo Lee

161. 
     Anisotropic fatigue behavior of rolled Mg–3Al–1Zn alloy

     Article • Journal of Materials Research, May 2010, Springer Science + Business Media

     Professor Chong Soo Lee

162. 
     Role of initial {10−12} twin in the fatigue behavior of rolled Mg–3Al–1Zn alloy

     Article • Scripta Materialia, May 2010, Elsevier

     Professor Chong Soo Lee

163. 
     Effect of stress state on the high temperature workability of AZ31 Mg alloy

     Article • Metals and Materials International, April 2010, Springer Science + Business Media

     Professor Chong Soo Lee

164. 
     Enhancing the fatigue property of rolled AZ31 magnesium alloy by controlling {10-12} twinning-detwinning characteristics

     Article • Journal of Materials Research, April 2010, Springer Science + Business Media

     Professor Chong Soo Lee

165. 
     Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders

     Article • Journal of Materials Science, March 2010, Springer Science + Business Media

     Professor Chong Soo Lee

166. 
     Activation mode dependent {10−12} twinning characteristics in a polycrystalline magnesium alloy

     Article • Scripta Materialia, February 2010, Elsevier

     Professor Chong Soo Lee

167. 
     On the transitions of deformation modes of fully austenitic steels at room temperature

     Article • Metals and Materials International, February 2010, Springer Science + Business Media

     Professor Chong Soo Lee

168. 
     Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy

     Article • Materials Science and Engineering A, January 2010, Elsevier

     Professor Chong Soo Lee

169. 
     Effect of Heat Treatment on Mechanical Properties of Super Duplex Stainless Steel

     Article • Advanced Materials Research, January 2010, Trans Tech Publications

     Professor Chong Soo Lee

170. 
     FE Analysis of Microstructure Evolution during Ring Rolling Process of a Large-Scale Ti-6Al-4V Alloy Ring

     Article • Materials Science Forum, January 2010, Trans Tech Publications

     Professor Chong Soo Lee

171. 
     Factors Influencing Tensile Ductility of OFHC Cu Having Different Ultrafine Grained Structures

     Article • MATERIALS TRANSACTIONS, January 2010, Japan Institute of Metals

     Professor Chong Soo Lee

172. 
     Predicting the Adiabatic Temperature of Transparent Y<SUB>3</SUB>Al<SUB>5</SUB>O<SUB>12</SUB> Prepared via Combustion Synthesis under Ultra-High Gravity

     Article • MATERIALS TRANSACTIONS, January 2010, Japan Institute of Metals

     Professor Chong Soo Lee

173. 
     Tensile failure of 4130 steel having different ultrafine grained structures

     Article • Materials Science and Engineering A, January 2010, Elsevier

     Professor Chong Soo Lee

174. 
     Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography

     Article • Acta Biomaterialia, October 2009, Elsevier

     Professor Chong Soo Lee

175. 
     Osteoconductivity of hydrophilic microstructured titanium implants with phosphate ion chemistry

     Article • Acta Biomaterialia, July 2009, Elsevier

     Professor Chong Soo Lee

176. 
     Cavitation damage incorporating cavity growth in submicrometer-grained titanium alloy

     Article • Journal of Materials Research, June 2009, Springer Science + Business Media

     Professor Chong Soo Lee

177. 
     Microstructure prediction of two-phase titanium alloy during hot forging using artificial neural networks and FE simulation

     Article • Metals and Materials International, June 2009, Springer Science + Business Media

     Professor Chong Soo Lee

178. 
     Evaluation methods for the hoop strength of small-sized tubular ceramic components

     Article • Journal of Materials Research, April 2009, Springer Science + Business Media

     Professor Chong Soo Lee

179. 
     Microstructural influences on hydrogen delayed fracture of high strength steels

     Article • Materials Science and Engineering A, April 2009, Elsevier

     Professor Chong Soo Lee

180. 
     Hydrogen Delayed Fracture Properties and Internal Hydrogen Behavior of a Fe–18Mn–1.5Al–0.6C TWIP Steel

     Article • ISIJ International, January 2009, Iron and Steel Institute of Japan

     Professor Chong Soo Lee

181. 
     FATIGUE LIFE PREDICTION OF ROLLED AZ31 MAGNESIUM ALLOY USING AN ENERGY-BASED MODEL

     Article • International Journal of Modern Physics B, December 2008, World Scientific Pub Co Pte Lt

     Professor Chong Soo Lee

182. 
     Enhanced superplasticity utilizing dynamic globularization of Ti–6Al–4V alloy

     Article • Materials Science and Engineering A, November 2008, Elsevier

     Professor Chong Soo Lee

183. 
     Evaluation of bone healing with eggshell-derived bone graft substitutes in rat calvaria: A pilot study

     Article • Journal of Biomedical Materials Research Part A, October 2008, Wiley

     Professor Chong Soo Lee

184. 
     Characterization of Deformation Behaviors and Elastic Moduli of Multilayered Films in Piezoelectric Inkjet Head

     Article • Journal of Microelectromechanical Systems, October 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Chong Soo Lee

185. 
     Factors influencing the equal-channel angular pressing of Ti–6Al–4V alloy having lamellar microstructure

     Article • Materials Science and Engineering A, October 2008, Elsevier

     Professor Chong Soo Lee

186. 
     Prediction of flow stress in Ti–6Al–4V alloy with an equiaxed α+β microstructure by artificial neural networks

     Article • Materials Science and Engineering A, September 2008, Elsevier

     Professor Chong Soo Lee

187. 
     Quantitative elemental analysis of FeZn-alloy coating by nondestructive method

     Article • X-Ray Spectrometry, September 2008, Wiley

     Professor Chong Soo Lee

188. 
     Deformation characteristics of submicrocrystalline Ti–6Al–4V

     Article • Scripta Materialia, June 2008, Elsevier

     Professor Chong Soo Lee

189. 
     High-temperature deformation and grain-boundary characteristics of titanium alloys with an equiaxed microstructure

     Article • Materials Science and Engineering A, June 2008, Elsevier

     Professor Chong Soo Lee

190. 
     High Temperature Deformation Behavior of Ti-6Al-4V Alloy with an Equiaxed Microstructure: a Neural Networks Analysis

     Article • Metals and Materials International, April 2008, Springer Science + Business Media

     Professor Chong Soo Lee

191. 
     Effects of Temperature and Strain Rate on the High-Temperature Workability of Strip-Cast Mg-3Al-1Zn Alloy

     Article • Metallurgical and Materials Transactions A, April 2008, Springer Science + Business Media

     Professor Chong Soo Lee

192. 
     Neural network modelling of flow stress in Ti–6Al–4V alloy with equiaxed and Widmanstätten microstructures

     Article • Materials Science and Technology, March 2008, Taylor & Francis

     Professor Chong Soo Lee

193. 
     Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy

     Article • MATERIALS TRANSACTIONS, January 2008, Japan Institute of Metals

     Professor Chong Soo Lee

194. 
     PRICM 6

     Article • October 2007, Trans Tech Publications

     Professor Chong Soo Lee

195. 
     Advanced Materials and Processing

     Article • October 2007, Trans Tech Publications

     Professor Chong Soo Lee

196. 
     Characterization of Dynamic Globularization Behavior during Hot Working of Ti-6Al-4V Alloy

     Article • Advanced Materials Research, October 2007, Trans Tech Publications

     Professor Chong Soo Lee

197. 
     Influence of Initial Texture on Twin Formation and Plastic Deformation of Rolled AZ31 Mg Alloy

     Article • Advanced Materials Research, October 2007, Trans Tech Publications

     Professor Chong Soo Lee

198. 
     Ring-Rolling Process for Manufacturing Ti-6Al-4V Plane and Profiled Ring-Products

     Article • Advanced Materials Research, October 2007, Trans Tech Publications

     Professor Chong Soo Lee

199. 
     Effect of volume fraction of undissolved cementite on the high cycle fatigue properties of high carbon steels

     Article • International Journal of Fatigue, September 2007, Elsevier

     Professor Chong Soo Lee

200. 
     Process Design of Profile Ring Rolling for Turbine Diaphragm Using FEM Simulation

     Article • Key Engineering Materials, August 2007, Trans Tech Publications

     Professor Chong Soo Lee

201. 
     Superplastic Behavior of Ultrafine Grained Al Alloys Fabricated by Severe Plastic Deformation

     Article • Key Engineering Materials, August 2007, Trans Tech Publications

     Professor Chong Soo Lee

202. 
     Continuum Damage Model of Creep-Fatigue Interaction in Ni-Base Superalloy

     Article • Key Engineering Materials, June 2007, Trans Tech Publications

     Professor Chong Soo Lee

203. 
     Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy

     Article • Key Engineering Materials, June 2007, Trans Tech Publications

     Professor Chong Soo Lee

204. 
     Ring-rolling design for a large-scale ring product of Ti–6Al–4V alloy

     Article • Journal of Materials Processing Technology, June 2007, Elsevier

     Professor Chong Soo Lee

205. 
     Constitutive Analysis of the High-Temperature Deformation Behavior of Single Phase α-Ti and α+β Ti-6Al-4V Alloy

     Article • Materials Science Forum, March 2007, Trans Tech Publications

     Professor Chong Soo Lee

206. 
     High Temperature Deformation Behavior of Beta-Gamma TiAl Alloy

     Article • Materials Science Forum, March 2007, Trans Tech Publications

     Professor Chong Soo Lee

207. 
     An Improved Process Design for the Hot Backward Extrusion of Ti-6Al-4V Tubes Using a Finite Element Method and Continuum Instability Criterion

     Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, February 2007, SAGE Publications

     Professor Chong Soo Lee

208. 
     Effect of Intergranular Ferrite on Hydrogen Delayed Fracture Resistance of Ultrahigh Strength Boron-added Steel

     Article • ISIJ International, January 2007, Iron and Steel Institute of Japan

     Professor Chong Soo Lee

209. 
     High Temperature Deformation Behavior of Strip-Cast AZ31 Mg Alloy

     Article • Advanced Materials Research, February 2006, Trans Tech Publications

     Professor Chong Soo Lee

210. 
     High Temperature Deformation Behavior of AZ31 Mg Alloy

     Article • January 2005, CrossRef Test Account

     Professor Chong Soo Lee

211. 
     High Temperature Deformation Behavior of AZ31 Mg Alloy

     Article • Materials Science Forum, January 2005, Trans Tech Publications

     Professor Chong Soo Lee

212. 
     Deformation Behavior of Ti-6Al-4V and Ti-6.85Al-1.6V Alloy with a Globular Microstructure

     Article • Materials Science Forum, January 2005, Trans Tech Publications

     Professor Chong Soo Lee

213. 
     Load Relaxation Behavior of Ultra-Fine Grained Ti-6Al-4V Alloy

     Article • Materials Science Forum, January 2005, Trans Tech Publications

     Professor Chong Soo Lee

214. 
     On the Low Strain Rate Regime of Structural Superplasticity - an Internal Variable Approach

     Article • Materials Science Forum, January 2005, Trans Tech Publications

     Professor Chong Soo Lee

215. 
     Superplastic Behavior of As-Equal Channel Angular Pressed 5083 Al and 5083 Al-0.2 Sc Alloys

     Article • Materials Science Forum, January 2005, Trans Tech Publications

     Professor Chong Soo Lee

216. 
     Yield Stress Anomalous Behavior in β-CuZn Alloy

     Article • Materials Science Forum, March 2004, Trans Tech Publications

     Professor Chong Soo Lee

217. 
     Prediction of Microstructure During High Temperature Forming of Ti-6Al-4V Alloy

     Article • Materials Science Forum, March 2004, Trans Tech Publications

     Professor Chong Soo Lee

218. 
     High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Widmanstäten Microstructure

     Article • Materials Science Forum, August 2003, Trans Tech Publications

     Professor Chong Soo Lee

219. 
     Fatigue Crack Propagation Behavior of AZ91D Magnesium Alloy

     Article • Materials Science Forum, March 2003, Trans Tech Publications

     Professor Chong Soo Lee

220. 
     Effect of W-addition on low cycle fatigue behavior of high Cr ferritic steels

     Article • Metals and Materials, November 1999, Springer Science + Business Media

     Professor Chong Soo Lee

221. 
     Grain elongation in a superplastic 7075 Al alloy

     Article • Scripta Materialia, July 1999, Elsevier

     Professor Chong Soo Lee

222. 
     Acoustic Emission Behavior during Tensile Tests of Low Carbon Steel Welds.

     Article • ISIJ International, January 1999, Iron and Steel Institute of Japan

     Professor Chong Soo Lee

223. 
     Microstructural influence on sag resistance of Cr containing and Cr free spring steels

     Article • Materials Science and Technology, August 1998, Taylor & Francis

     Professor Chong Soo Lee

224. 
     A strain energy-based approach to the low-cycle fatigue damage mechanism in a high-strength spring steel

     Article • Metallurgical and Materials Transactions A, May 1998, Springer Science + Business Media

     Professor Chong Soo Lee

225. 
     Microstructural evolution during superplastic bulge forming of Ti–6Al–4V alloy

     Article • Materials Science and Engineering A, March 1998, Elsevier

     Professor Chong Soo Lee

226. 
     Article • Advanced Performance Materials, January 1998, Springer Science + Business Media

     Professor Chong Soo Lee

227. 
     Effects of morphology and volume fraction of α 2 phase on the fatigue crack propagation of a Ti-24Al-11Nb alloy

     Article • Metallurgical and Materials Transactions A, December 1997, Springer Science + Business Media

     Professor Chong Soo Lee

228. 
     Superplasticity of fine-grained 7475 Al alloy and a proposed new deformation mechanism

     Article • Acta Materialia, December 1997, Elsevier

     Professor Chong Soo Lee

229. 
     Acoustic emission characteristics associated with microstructures and plate orientations of an AlLi 8090 alloy

     Article • Materials Science and Engineering A, June 1997, Elsevier

     Professor Chong Soo Lee

230. 
     Improvement of sag resistance by the addition of tungsten in SiCrMoV steels

     Article • Scripta Materialia, June 1997, Elsevier

     Professor Chong Soo Lee

231. 
     Microstructural influence on the fatigue crack propagation of a γ-TiAl alloy

     Article • Scripta Materialia, April 1997, Elsevier

     Professor Chong Soo Lee

232. 
     Effects of W Addition and Heat-treatment on Corrosion Fatigue Crack Growth Behavior of Duplex Stainless Steels.

     Article • ISIJ International, January 1997, Iron and Steel Institute of Japan

     Professor Chong Soo Lee

233. 
     Dislocation structure associated with deformation behavior of Fe3Al alloys

     Article • Scripta Materialia, November 1996, Elsevier

     Professor Chong Soo Lee

234. 
     Precise determination of fatigue crack closure in Al alloys

     Article • Materials Science and Engineering A, October 1996, Elsevier

     Professor Chong Soo Lee

235. 
     Effect of interlamellar spacing on the delamination of pearlitic steel wires

     Article • Scripta Materialia, September 1996, Elsevier

     Professor Chong Soo Lee

236. 
     Plastic equation of state and load relaxation behavior of pure tin

     Article • Scripta Materialia, September 1996, Elsevier

     Professor Chong Soo Lee

237. 
     Fatigue crack propagation in Al-Li 8090 alloy at room (300K) and cryogenic (77K) temperatures

     Article • Scripta Materialia, January 1996, Elsevier

     Professor Chong Soo Lee

238. 
     Effects of microstructure and specimen thickness on the fatigue crack closure in Al-Li 8090 alloy

     Article • Scripta Metallurgica et Materialia, April 1995, Elsevier

     Professor Chong Soo Lee

239. 
     Acoustic emission measurement of fatigue crack closure

     Article • Scripta Metallurgica et Materialia, March 1995, Elsevier

     Professor Chong Soo Lee

240. 
     Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

     Article • Materials Science and Engineering A, January 1995, Elsevier

     Professor Chong Soo Lee

241. 
     Development of Inelastic Constitutive Relations

     Article • Key Engineering Materials, January 1991, Trans Tech Publications

     Professor Chong Soo Lee

242. 
     Direct Observation of Crack Tip Phenomena and a Dislocation Model of Fracture

     Article • Key Engineering Materials, January 1991, Trans Tech Publications

     Professor Chong Soo Lee

243. 
     Fracture Behaviors and Mechanical Properties of Metal Matrix Composites

     Article • Key Engineering Materials, January 1991, Trans Tech Publications

     Professor Chong Soo Lee

244. 
     The Effect of Microstructural Variation on the Mechanical Properties of Ti-10V-2Fe-3Al Alloy

     Article • Key Engineering Materials, January 1991, Trans Tech Publications

     Professor Chong Soo Lee