All Stories

  1. Numerical investigation of pre-flawed FGM tubes repaired with different composite jackets under sequential gaseous detonation loading

    Article • Results in Engineering, December 2024, Elsevier

    Carlos Cimini

  2. Bayesian data-driven framework for structural health monitoring of composite structures under limited experimental data

    Article • Structural Health Monitoring, April 2024, SAGE Publications

    Carlos Cimini

  3. Bayesian calibration for Lamb wave propagation on a composite plate using a machine learning surrogate model

    Article • Mechanical Systems and Signal Processing, February 2024, Elsevier

    Carlos Cimini

  4. Biomechanics of internal fixation in Hoffa fractures – A comparison of four different constructs

    Article • Injury, February 2024, Elsevier

    Carlos Cimini

  5. Busch-Hoffa fracture: A systematic review

    Article • Medicine, December 2023, Wolters Kluwer Health

    Carlos Cimini

  6. A Review on Industrial Perspectives and Challenges on Material, Manufacturing, Design and Development of Compressed Hydrogen Storage Tanks for the Transportation Sector

    Article • Energies, July 2022, MDPI AG

    Carlos Cimini

  7. Numerical analysis of an UAS impact in a reinforced wing fixed leading edge

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2021, Springer Science + Business Media

    Carlos Cimini, Dr. Marcelo Greco

  8. Experimental and Numerical Comparison of Impact Behavior between Thermoplastic and Thermoset Composite for Wind Turbine Blades

    Article • Materials, October 2021, MDPI AG

    Carlos Cimini

  9. Fiber waviness and its effect on the mechanical performance of fiber reinforced polymer composites: An enhanced review

    Article • Composites Part A Applied Science and Manufacturing, October 2021, Elsevier

    Carlos Cimini

  10. Comparison between a linear and cubic fiber angle variation on buckling response of variable angle tow composite panels

    Article • Latin American Journal of Solids and Structures, January 2021, FapUNIFESP (SciELO)

    Carlos Cimini

  11. A case for Tsai’s Modulus, an invariant-based approach to stiffness

    Article • Composite Structures, November 2020, Elsevier

    Carlos Cimini

  12. Bending behavior of CFRP cables in the nonlinear displacement range

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, December 2019, Springer Science + Business Media

    Carlos Cimini

  13. Development of an orthopedic system for physiotherapy and rehabilitation of the leg

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, December 2019, Springer Science + Business Media

    Carlos Cimini

  14. Deformation and fracture of cylindrical tubes under detonation loading: A review of numerical and experimental analyses

    Article • International Journal of Pressure Vessels and Piping, June 2019, Elsevier

    Carlos Cimini

  15. Numerical Analysis of Carbon Fiber Cables for Mooring Lines Under Tensile and Bending Loading

    Article • International Journal of Offshore and Polar Engineering, December 2018, International Society of Offshore and Polar Engineers

    Carlos Cimini

  16. Finite element evaluation of the effects of curvature in Lamb waves for composites structural health monitoring

    Article • Latin American Journal of Solids and Structures, October 2018, FapUNIFESP (SciELO)

    Carlos Cimini

  17. Strength analysis of composite cables

    Article • Latin American Journal of Solids and Structures, June 2018, FapUNIFESP (SciELO)

    Carlos Cimini

  18. Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method

    Article • Latin American Journal of Solids and Structures, April 2018, FapUNIFESP (SciELO)

    Dr. Marcelo Greco, Carlos Cimini

  19. Finite element analysis of a repaired thin-walled aluminum tube containing a longitudinal crack with composite patches under internal dynamic loading

    Article • Composite Structures, January 2018, Elsevier

    Carlos Cimini

  20. Metallic and composite cables: a brief review

    Article • International Journal of Computer Aided Engineering and Technology, January 2018, Inderscience Publishers

    Carlos Cimini

  21. Numerical and Experimental Analysis of the Tensile and Bending Behaviour of CFRP Cables

    Article • Polymers and Polymer Composites, November 2017, SAGE Publications

    Carlos Cimini

  22. Theory and validation of the master ply concept for invariant-based stiffness of composites

    Article • Journal of Composite Materials, September 2017, SAGE Publications

    Carlos Cimini

  23. A Brain Computer Interface Using VEP and MMSC for Driving a Mechanical Arm

    Article • January 2017, Springer Science + Business Media

    Carlos Cimini

  24. Effects of shallow angle on static strength and fatigue life of multi-directional laminates for wind turbine blades

    Article • Journal of Composite Materials, October 2016, SAGE Publications

    Carlos Cimini

  25. Characterization of moisture effect on static and fatigue performance of epoxy resin using thin-film specimen on dynamic mechanical analyzer

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    Carlos Cimini

  26. Boundary layer and panel methods using wing strip

    Article • Applied Mechanics and Materials, October 2015, Trans Tech Publications

    Carlos Cimini

  27. Evaluation of the Mechanical Behavior of an Epoxy Structural Adhesive under Shear Load

    Article • January 2015, SWGE Sistemas

    Carlos Cimini

  28. Evaluation of compressive strength for the wood Eucalyptus grandis using ultrasonic wave propagation

    Article • European Journal of Wood and Wood Products, October 2014, Springer Science + Business Media

    Carlos Cimini

  29. Low-Cost System to Evaluate Impact Localization in Composite Plates

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Carlos Cimini

  30. Application of the Radial Integration Method into Dynamic Formulation of Anisotropic Shallow Shells Using Boundary Element Method

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Carlos Cimini

  31. Assessment of a General Aviation Pilot Assisting System Influence on the Piloting Performance and Safety of Inexperienced Pilots

    Article • Advanced Materials Research, August 2014, Trans Tech Publications

    Carlos Cimini

  32. Probabilistic cumulative damage model to estimate fatigue life

    Article • Fatigue & Fracture of Engineering Materials & Structures, August 2013, Wiley

    Carlos Cimini

  33. Temperature profile of progressive damaged overhead electrical conductors

    Article • International Journal of Electrical Power & Energy Systems, July 2013, Elsevier

    Carlos Cimini

  34. Special Issue on First Brazilian Conference on Composite Materials – Editorial Forward

    Article • International Journal of Vehicle Structures and Systems, November 2012, MAFTREE

    Carlos Cimini

  35. Residual Stresses and Cracking in Dental Restorations due to Resin Contraction Considering In-Depth Young's Modulus Variation

    Article • March 2012, IntechOpen

    Carlos Cimini

  36. Thermal fatigue damage evaluation of a PWR NPP steam generator injection nozzle model subjected to thermal stratification phenomenon

    Article • Nuclear Engineering and Design, March 2011, Elsevier

    Carlos Cimini

  37. A damage prediction of high temperature polymer matrix composites

    Article • Science and Engineering of Composite Materials, January 2011, De Gruyter

    Carlos Cimini

  38. Strengths & Lives of Composites and Stephen Tsai

    Article • Journal of Composite Materials, September 2010, SAGE Publications

    Carlos Cimini

  39. 3D finite element analysis on esthetic indirect dental restorations under thermal and mechanical loading

    Article • Medical & Biological Engineering & Computing, July 2010, Springer Science + Business Media

    Carlos Cimini

  40. Evaluation of Notched Strength of Composite Laminates for Structural Design

    Article • Journal of Composite Materials, May 2010, SAGE Publications

    Carlos Cimini

  41. Evaluation of pitch up of two-axle solid waste collection compactor trucks in the static condition

    Article • Waste Management & Research The Journal for a Sustainable Circular Economy, April 2010, SAGE Publications

    Carlos Cimini

  42. Composite Material Property Database Using Smooth Specimens to Generate Design Allowables With Uncertainty Estimation

    Article • January 2010, ASME International

    Carlos Cimini

  43. Thermal Fatigue Analysis of a PWR NPP Steam Generator Injection Nozzle Model Subjected to the Thermal Stratification Phenomenon

    Article • January 2009, ASME International

    Carlos Cimini

  44. Influence of cavity preparations and restorative procedures on stress distribution by finite element method

    Article • The Journal of Indian Prosthodontic Society, January 2008, Medknow

    Carlos Cimini

  45. Railcar Hollow Axle

    Article • November 2007, SAE International

    Carlos Cimini

  46. Determination of tangential and normal components of oral forces

    Article • Journal of Applied Oral Science, February 2007, FapUNIFESP (SciELO)

    Carlos Cimini

  47. Method to evaluate takeoff distance for nose-gear light aircrafts

    Article • November 2006, SAE International

    Carlos Cimini

  48. Development of an UAV Aircraft for General Purposes

    Article • November 2006, SAE International

    Carlos Cimini

  49. Effect of the post geometry and material on the stress distribution of restored upper central incisors using 3D finite element models. Stress distribution on incisors with posts

    Article • The Journal of Indian Prosthodontic Society, January 2006, Medknow

    Carlos Cimini

  50. Complete characterization of oral occlusion loads acting in a human molar

    Article • Journal of Biomechanics, January 2006, Elsevier

    Carlos Cimini

  51. Stress analysis of an upper central incisor restored with different posts

    Article • Journal of Oral Rehabilitation, August 2003, Wiley

    Carlos Cimini

  52. Abfraction and Anisotropy--Effects of Prism Orientation on Stress Distribution

    Article • Computer Methods in Biomechanics & Biomedical Engineering, February 2003, Taylor & Francis

    Carlos Cimini

  53. Fracture mechanics via sensitivity analysis and numerical evaluation of J integral in cracked sheets

    Article • Journal of Constructional Steel Research, January 1994, Elsevier

    Carlos Cimini