All Stories

  1. Amperometric nonenzymatic glucose biosensor based on graphite rod electrode modified by Ni-nanoparticle/polypyrrole composite
  2. Towards supercapacitors: Cyclic voltammetry and fast Fourier transform electrochemical impedance spectroscopy based evaluation of polypyrrole electrochemically deposited on the pencil graphite electrode
  3. Conducting Polymers in the Design of Biosensors and Biofuel Cells
  4. Formation and Electrochemical Evaluation of Polyaniline and Polypyrrole Nanocomposites Based on Glucose Oxidase and Gold Nanostructures
  5. Influence of PDA Coating on the Structural, Optical and Surface Properties of ZnO Nanostructures
  6. Formation and Electrochemical Characterisation of Enzyme-Assisted Formation of Polypyrrole and Polyaniline Nanocomposites with Embedded Glucose Oxidase and Gold Nanoparticles
  7. Polyethylene-Carbon Composite (Velostat®) Based Tactile Sensor
  8. Progress and Insights in the Application of MXenes as New 2D Nano-Materials Suitable for Biosensors and Biofuel Cell Design
  9. Cobalt hexacyanoferrate based optical sensor for continuous optical sensing of hydrogen peroxide
  10. Evaluation of electrochemical quartz crystal microbalance based sensor modified by uric acid-imprinted polypyrrole
  11. Insights in the Application of Stoichiometric and Non-Stoichiometric Titanium Oxides for the Design of Sensors for the Determination of Gases and VOCs (TiO2−x and TinO2n−1 vs. TiO2)
  12. Electrodeposited Gold Nanostructures for the Enhancement of Electrochromic Properties of PANI–PEDOT Film Deposited on Transparent Electrode
  13. Scanning electrochemical microscopy for the investigation of redox potential of human myocardium-derived mesenchymal stem cells grown at 2D and 3D conditions
  14. Porous Aluminium Oxide Coating for the Development of Spectroscopic Ellipsometry Based Biosensor: Evaluation of Human Serum Albumin Adsorption
  15. Electrochromic Textile Composites Based on Polyaniline-Coated Metallized Conductive Fabrics
  16. Whispering gallery mode resonator and glucose oxidase based glucose biosensor
  17. Application of ZnO Nanorods Based Whispering Gallery Mode Resonator in Optical Immunosensors
  18. Tuning the Photo-Luminescence Properties of WO3 Layers by the Adjustment of Layer Formation Conditions
  19. Synthesis of Heterogeneously Conductive Polypyrrole Layer from Non-Aqueous Solution Using The Double-Step Potential Technique
  20. Towards Microorganism-Based Biofuel Cells: The Viability of Saccharomyces cerevisiae Modified by Multiwalled Carbon Nanotubes
  21. Multiwavelength optical sensor based on a gradient photonic crystal with a hexagonal plasmonic array
  22. Towards the application of fast Fourier transform - scanning electrochemical impedance microscopy (FFT-SEIM)
  23. Selectivity of Tungsten Oxide Synthesized by Sol-Gel Method Towards Some Volatile Organic Compounds and Gaseous Materials in a Broad Range of Temperatures
  24. Silane-based self-assembled monolayer deposited on fluorine doped tin oxide as model system for pharmaceutical and biomedical analysis
  25. Microbial Fuel Cell-Based Toxicity Sensor
  26. TiO2-x/TiO2-Structure Based ‘Self-Heated’ Sensor for the Determination of Some Reducing Gases
  27. TiO2-x/TiO2-Structure Based ‘Self-Heated’ Sensor for the Determination of Some Reducing Gases
  28. Photoelectrochemical Bisphenol S Sensor Based on ZnO‐Nanoroads Modified by Molecularly Imprinted Polypyrrole
  29. Evaluation of carbon-based nanostructures suitable for the development of black pigments and glazes
  30. Modelling of immunosensor response: the evaluation of binding kinetics between an immobilized receptor and structurally-different genetically engineered ligands
  31. Enzymatic Formation of Polyaniline, Polypyrrole, and Polythiophene Nanoparticles with Embedded Glucose Oxidase
  32. Electrochemical Deposition and Investigation of Poly-9,10-Phenanthrenequinone Layer
  33. Comparative study of polyaniline (PANI), poly(3,4-ethylenedioxythiophene) (PEDOT) and PANI-PEDOT films electrochemically deposited on transparent indium thin oxide based electrodes
  34. Photoluminescence immunosensor based on bovine leukemia virus proteins immobilized on the ZnO nanorods
  35. Cell-assisted synthesis of conducting polymer – polypyrrole – for the improvement of electric charge transfer through fungal cell wall
  36. Formation of Polyaniline and Polypyrrole Nanocomposites with Embedded Glucose Oxidase and Gold Nanoparticles
  37. Method for Living Cell Mechanical Properties Evaluation from Force-Indentation Curves
  38. An Application of Conducting Polymer Polypyrrole for the Design of Electrochromic pH and CO2Sensors
  39. Organic Semiconductors with Carbazole and Triphenylamine Moieties for Glucose Oxidase-Based Biosensors
  40. Prussian White-Based Optical Glucose Biosensor
  41. Redox-probe-free scanning electrochemical microscopy combined with fast Fourier transform electrochemical impedance spectroscopy
  42. Towards direct enzyme wiring: a theoretical investigation of charge carrier transfer mechanisms between glucose oxidase and organic semiconductors
  43. Physicochemical Characteristics of Polypyrrole/(Glucose oxidase)/(Prussian Blue)-based Biosensor Modified with Ni- and Co-Hexacyanoferrates
  44. Electrochemical Formation and Evaluation of Poly-9,10-Phenanthrenequinone of Layer
  45. Electrochromic Sensors Based on Conducting Polymers, Metal Oxides, and Coordination Complexes
  46. Towards electrochromic ammonium ion sensors
  47. Influence of ZnO/graphene nanolaminate periodicity on their structural and mechanical properties
  48. Experimental and Theoretical Investigations of an Electrochromic Azobenzene and 3,4-Ethylenedioxythiophene-based Electrochemically Formed Polymeric Semiconductor
  49. Synthesis of Polypyrrole Induced by [Fe(CN)6]3− and Redox Cycling of [Fe(CN)6]4−/[Fe(CN)6]3−
  50. In-vitro model for assessing glucose diffusion through skin
  51. Modification of Aspergillus niger by conducting polymer, Polypyrrole, and the evaluation of electrochemical properties of modified cells
  52. EDTA-modified PANI/SWNTs nanocomposite for differential pulse voltammetry based determination of Cu(II) ions
  53. Fluorescence Quenching-Based Evaluation of Glucose Oxidase Composite with Conducting Polymer, Polypyrrole
  54. Compact high-sensitivity potentiometer for detection of low ion concentrations in liquids
  55. Insights into a hole transfer mechanism between glucose oxidase and a p-type organic semiconductor
  56. Porous silicon based photoluminescence immunosensor for rapid and highly-sensitive detection of Ochratoxin A
  57. Yeast-assisted synthesis of polypyrrole: Quantification and influence on the mechanical properties of the cell wall
  58. An Amperometric Glucose Biosensor Based on Poly (Pyrrole-2-Carboxylic Acid)/Glucose Oxidase Biocomposite
  59. Surfaces functionalized by graphene oxide nanosheets for single cell investigations
  60. Composites Based on Conducting Polymers and Carbon Nanomaterials for Heavy Metal Ion Sensing (Review)
  61. Large-scale self-organized gold nanostructures with bidirectional plasmon resonances for SERS
  62. Analytical Evaluation of Optical pH-Sensitivity of Polyaniline Layer Electrochemically Deposited on ITO Electrode
  63. Analytical, thermodynamical and kinetic characteristics of photoluminescence immunosensor for the determination of Ochratoxin A
  64. EDA modified PANI/SWNTs nanocomposite for determination of Ni(II) metal ions
  65. EDTA_PANI/SWCNTs nanocomposite modified electrode for electrochemical determination of copper (II), lead (II) and mercury (II) ions
  66. Interaction mechanism between TiO2 nanostructures and bovine leukemia virus proteins in photoluminescence-based immunosensors
  67. Real time study of amalgam formation and mercury adsorption on thin gold film by total internal reflection ellipsometry
  68. Towards the application of Al2O3/ZnO nanolaminates in immunosensors: total internal reflection spectroscopic ellipsometry based evaluation of BSA immobilization
  69. Antibacterial and antifungal activity of silver nanospheres synthesized by tri-sodium citrate assisted chemical approach
  70. Gold coated porous silicon nanocomposite as a substrate for photoluminescence-based immunosensor suitable for the determination of Aflatoxin B1
  71. Fast Fourier transformation electrochemical impedance spectroscopy for the investigation of inactivation of glucose biosensor based on graphite electrode modified by Prussian blue, polypyrrole and glucose oxidase
  72. Toward development of optical biosensors based on photoluminescence of TiO2 nanoparticles for the detection of Salmonella
  73. Hybrid system based on fast Fourier transform electrochemical impedance spectroscopy combined with scanning electrochemical microscopy
  74. Carbon nanostructures for electrochemical sensors
  75. Conducting polymers in the design of enzymatic sensors
  76. Hybrid electrochemical/electrochromic Cu(II) ion sensor prototype based on PANI/ITO-electrode
  77. Optical sensors based on electrochromic conducting polymers
  78. Photoluminescence ZnO nanorod biosensors for medical and food safety applications
  79. Towards electrochemical/electrochromic sensors based on polyaniline modified indium tin oxide electrodes
  80. Reagent-less amperometric glucose biosensor based on a graphite rod electrode layer-by-layer modified with 1,10-phenanthroline-5,6-dione and glucose oxidase
  81. ZnO films formed by atomic layer deposition as an optical biosensor platform for the detection of Grapevine virus A-type proteins
  82. Evaluation of enzymatic formation of polyaniline nanoparticles
  83. Evaluation of Enzymatic Kinetics of GOx-based Electrodes by Scanning Electrochemical Microscopy at Redox Competition Mode
  84. Single-step procedure for the modification of graphite electrode by composite layer based on polypyrrole, Prussian blue and glucose oxidase
  85. Simultaneous and Sequential Synthesis of Polyaniline-g-poly(ethylene glycol) by Combination of Oxidative Polymerization and CuAAC Click Chemistry: A Water-Soluble Instant Response Glucose Biosensor Material
  86. Study of Pyrotechnic Blue Strobe Compositions Based on Ammonium Perchlorate and Tetramethylammonium Nitrate
  87. Amperometric Glucose Biosensor Based on Electrochemically Deposited Gold Nanoparticles Covered by Polypyrrole
  88. Amperometric Glucose Biosensor Based on Titanium Electrode Modified with Prussian Blue Layer and Immobilized Glucose Oxidase
  89. Electrochemical detection of Hg (II) ions using EDTA-PANI/SWNTs nanocomposite modified SS electrode
  90. Electrochemical polypyrrole formation from pyrrole ‘adlayer’
  91. Evaluation of Electron Transfer in Electrochemical System Based on Immobilized Gold Nanoparticles and Glucose Oxidase
  92. Scanning electrochemical microscopy based evaluation of influence of pH on bioelectrochemical activity of yeast cells − Saccharomyces cerevisiae
  93. Rotating disk electrode-based investigation of electroluminescence of tris(2,2′-bipiridin)dichlorruthenium(II)hexahydrate, luminol, and N-(4-aminobuthyl)-N-ethyl-isoluminol
  94. Investigation of biocatalytic enlargement of gold nanoparticles using dynamic light scattering and atomic force microscopy
  95. Modelling of Scanning Electrochemical Microscopy at Redox Competition Mode Using Diffusion and Reaction Equations
  96. Tunable Bloch surface waves in anisotropic photonic crystals based on lithium niobate thin films
  97. Tuning of Structural and Optical Properties of Graphene/ZnO Nanolaminates
  98. 9,10-Phenanthrenequinone as a redox mediator for the imaging of yeast cells by scanning electrochemical microscopy
  99. Enhancement of Electronic and Optical Properties of ZnO/Al2O3 Nanolaminate Coated Electrospun Nanofibers
  100. Synthesis of polypyrrole microspheres by Streptomyces spp.
  101. Synthesis of polypyrrole within the cell wall of yeast by redox-cycling of [Fe(CN) 6 ] 3− /[Fe(CN) 6 ] 4−
  102. Evaluation of 1,10-phenanthroline-5,6-dione as redox mediator for glucose oxidase
  103. Evaluation of theophylline imprinted polypyrrole film
  104. Optical properties of ultrathin Al2O3/ZnO nanolaminates
  105. Oxidizer Ratio and Oxygen Balance Influence on the Emission Spectra of Green-Colored Pyrotechnic Flames
  106. Electrochemical determination of Cu(II) ions using glassy carbon electrode modified by some nanomaterials and 3-nitroaniline
  107. Evaluation of chemical synthesis of polypyrrole particles
  108. Copper(I) Bromide: An Alternative Emitter for Blue-Colored Flame Pyrotechnics
  109. The substrate matters in the Raman spectroscopy analysis of cells
  110. Deposition of silver nanoparticles from suspensions containing tannic acid
  111. The use of different glucose oxidases for the development of an amperometric reagentless glucose biosensor based on gold nanoparticles covered by polypyrrole
  112. Characterization of caffeine-imprinted polypyrrole by a quartz crystal microbalance and electrochemical impedance spectroscopy
  113. Effect of some redox mediators on FAD fluorescence of glucose oxidase from Penicillium adametzii LF F-2044.1
  114. Tailoring the Structural, Optical, and Photoluminescence Properties of Porous Silicon/TiO 2 Nanostructures
  115. Quartz Crystal Microbalance-Based Evaluation of the Electrochemical Formation of an Aggregated Polypyrrole Particle-Based Layer
  116. Biofuel cell based on glucose oxidase from Penicillium funiculosum 46.1 and horseradish peroxidase
  117. Impact of diamond nanoparticles on neural cells
  118. Scanning electrochemical impedance microscopy for investigation of glucose oxidase catalyzed reaction
  119. An electrochemical and computational study for discrimination ofd- andl-cystine by reduced graphene oxide/β-cyclodextrin
  120. The isotope method for the determination of stoichiometry between compounds forming the polypyrrole and glucose oxidase composite
  121. The influence of localized plasmons on the optical properties of Au/ZnO nanostructures
  122. Development of a reusable protein G based SPR immunosensor for direct human growth hormone detection in real samples
  123. Evaluation of poly(pyrrole-2-carboxylic acid) particles synthesized by enzymatic catalysis
  124. Impact of differently modified nanocrystalline diamond on the growth of neuroblastoma cells
  125. Permeabilization of yeast Saccharomyces cerevisiae cell walls using nanosecond high power electrical pulses
  126. An Immunosensing System for Antibody Detection Based on Capacitive Micromachined Ultrasound Transducer Resonance Sensors
  127. Electrochemical biosensor based on glucose oxidase encapsulated within enzymatically synthesized poly(1,10-phenanthroline-5,6-dione)
  128. Electrochemical deposition of gold nanoparticles on graphite rod for glucose biosensing
  129. Electrochemical Impedance Spectroscopy Based Evaluation of 1,10-Phenanthroline-5,6-dione and Glucose Oxidase Modified Graphite Electrode
  130. In situ study of ligand–receptor interaction by total internal reflection ellipsometry
  131. Evaluation of Histamine Imprinted Polypyrrole Deposited on Boron Doped Nanocrystalline Diamond
  132. A Spectrophotometric Study of Red Pyrotechnic Flame Properties Using Three Classical Oxidizers: Ammonium Perchlorate, Potassium Perchlorate, Potassium Chlorate
  133. Mediatorless Carbohydrate/Oxygen Biofuel Cells with Improved Cellobiose Dehydrogenase Based Bioanode
  134. Development of poly(3-aminophenylboronic acid) modified graphite rod electrode suitable for fluoride determination
  135. Electrochemical formation of polypyrrole-based layer for immunosensor design
  136. Evaluation of Some Redox Mediators in the Design of Reagentless Amperometric Glucose Biosensor
  137. Molecularly Imprinted Polypyrrole Based Impedimentric Sensor for Theophylline Determination
  138. Optical and structural properties of Al2 O3 /ZnO nanolaminates deposited by ALD method
  139. Resonant gravimetric immunosensing based on capacitive micromachined ultrasound transducers
  140. A QCM-D Study of Reduced Antibody Fragments Immobilized on Planar Gold and Gold Nanoparticle Modified Sensor Surfaces
  141. Enzymatic polymerization of polythiophene by immobilized glucose oxidase
  142. Tuning Optical Properties of Al 2 O 3 /ZnO Nanolaminates Synthesized by Atomic Layer Deposition
  143. Bioelectrocatalytic reduction of oxygen at gold nanoparticles modified with laccase
  144. Some biocompatibility aspects of conducting polymer polypyrrole evaluated with bone marrow-derived stem cells
  145. Development of an SPE method for the determination of zaleplon and zopiclone in hemolyzed blood using fast GC with negative-ion chemical ionization MS
  146. 1,10-Phenanthroline-5,6-dione and 9,10-phenanthrenequinone as redox mediators for amperometric glucose biosensors
  147. Antibody fragment immobilization on planar gold and gold nanoparticle modified quartz crystal microbalance with dissipation sensor surfaces for immunosensor applications
  148. Redox competition and generation-collection modes based scanning electrochemical microscopy for the evaluation of immobilised glucose oxidase-catalysed reactions
  149. Amperometric Glucose Biosensor Based on Glucose Oxidase, 1,10-Phenanthroline-5,6-dione and Carbon Nanotubes
  150. Comparison of Glucose Oxidases from Penicillium Adametzii, Penicillium Funiculosum and Aspergillus Niger in the Design of Amperometric Glucose Biosensors
  151. Deposition of gold nanoparticles on mica modified by poly(allylamine hydrochloride) monolayers
  152. Evaluation of the Redox Mediating Properties of 1,10-Phenanthroline-5,6-dione for Glucose Oxidase Modified Graphite Electrodes
  153. Application of oriented and random antibody immobilization methods in immunosensor design
  154. Gold nanoparticle and conducting polymer-polyaniline-based nanocomposites for glucose biosensor design
  155. Biofuel Cell Based on Anode and Cathode Modified by Glucose Oxidase
  156. Electric field-induced effects on yeast cell wall permeabilization
  157. Specificity of Glucose Oxidase from Penicillium funiculosum 46.1 Towards Some Redox Mediators
  158. Application of CMUT as immunosensor
  159. A New Experimental Model for Neuronal and Glial Differentiation Using Stem Cells Derived from Human Exfoliated Deciduous Teeth
  160. Magnetic gold nanoparticles in SERS-based sandwich immunoassay for antigen detection by well oriented antibodies
  161. Study of optical anisotropy in thin molecular layers by total internal reflection ellipsometry
  162. Evaluation of cytotoxicity of polypyrrole nanoparticles synthesized by oxidative polymerization
  163. Molecularly Imprinted Polypyrrole for DNA Determination
  164. Mixed-mode SPE for a multi-residue analysis of benzodiazepines in whole blood using rapid GC with negative-ion chemical ionization MS
  165. Electrochemical stability and repulsion of polypyrrole film
  166. Determination of antibodies against human growth hormone using a direct immunoassay format and different electrochemical methods
  167. A surface plasmon resonance immunosensor for human growth hormone based on fragmented antibodies
  168. Study of antibody/antigen binding kinetics by total internal reflection ellipsometry
  169. Glucose biosensor based on glucose oxidase and gold nanoparticles of different sizes covered by polypyrrole layer
  170. Copper nanoparticle modified carbon electrode for determination of dopamine
  171. Fluorescence study of glucose oxidase self-encapsulated within polypyrrole
  172. Comparative study of surface plasmon resonance, electrochemical and electroassisted chemiluminescence methods based immunosensor for the determination of antibodies against human growth hormone
  173. Phenanthroline derivatives electrochemically grafted to glassy carbon for Cu(II) ion detection
  174. Colorimetric Determination of Triacetin in Polymer-Composites
  175. Comparison of Oriented and Random Antibody Immobilization Techniques on the Efficiency of Immunosensor
  176. Conducting and Electrochemically Generated Polymers in Sensor Design (Mini Review)
  177. Gold Nanoparticles and Polypyrrole for Glucose Biosensor Design
  178. Evaluation of intact- and fragmented-antibody based immunosensors by total internal reflection ellipsometry
  179. Evaluation of amperometric glucose biosensors based on glucose oxidase encapsulated within enzymatically synthesized polyaniline and polypyrrole
  180. Assembly and Characterization of Polyurethane-Gold Nanoparticle Conjugates
  181. Polymerization Model for Hydrogen Peroxide Initiated Synthesis of Polypyrrole Nanoparticles
  182. 1,10-Phenanthroline modified glassy carbon electrode for voltammetric determination of cadmium(II) ions
  183. Square wave voltammetry based on determination of copper (II) ions by polyluteolin- and polykaempferol-modified electrodes
  184. Visualization of red-ox proteins on the gold surface using enzymatic polypyrrole formation
  185. Electrochemical copper (II) sensor based on self-assembled 4-amino-6-hydroxy-2-mercaptopyrimidine monohydrate
  186. Electrochemical Determination of Cu(II) Ions by 4-Formylphenylboronic Acid Modified Gold Electrode
  187. Elastic properties of chemically modified baker's yeast cells studied by AFM
  188. Atomic Force Microscopy Study of Living Baker's Yeast Cells
  189. Polyphenol-modified glassy carbon electrodes for copper detection
  190. Studies of optical anisotropy in opals by normal incidence ellipsometry
  191. Total internal reflection ellipsometry of metal–organic compound structures modified with gold nanoparticles
  192. Electrochemical Glutathione Sensor Based on Electrochemically Deposited Poly-m-aminophenol
  193. Baker's Yeast Transformation Studies by Atomic Force Microscopy
  194. Direct electron transfer from glucose oxidase immobilized on polyphenanthroline-modified glassy carbon electrode
  195. Electrochemical modification of glassy carbon electrode by poly-4-nitroaniline and its application for determination of copper(II)
  196. The effect of colloidal solutions of gold nanoparticles on the performance of a glucose oxidase modified carbon electrode
  197. Enzymatically synthesized polyaniline layer for extension of linear detection region of amperometric glucose biosensor
  198. Immunosensor based on fluorescence quenching matrix of the conducting polymer polypyrrole
  199. 1,10-Phenanthroline derivatives as mediators for glucose oxidase
  200. Comparative Study of Random and Oriented Antibody Immobilization Techniques on the Binding Capacity of Immunosensor
  201. Electrochemical impedance spectroscopy of polypyrrole based electrochemical immunosensor
  202. Glucose biosensor based on graphite electrodes modified with glucose oxidase and colloidal gold nanoparticles
  203. Capacitive micromachined ultrasound transducer (cMUT) for immunosensor design
  204. Spectrophotometric evaluation of gold nanoparticles as red-ox mediator for glucose oxidase
  205. Polyaniline synthesis catalysed by glucose oxidase
  206. Stabilization of (CdSe)ZnS Quantum Dots with Polypyrrole Formed by UV/VIS Irradiation Initiated Polymerization
  207. Hemoproteins in Design of Biofuel Cells
  208. Surface plasmon resonance biosensor for direct detection of antibodies against human growth hormone
  209. Enzymatic biofuel cell based on anode and cathode powered by ethanol
  210. Amperometric immunosensor for diagnosis of BLV infection
  211. Self-encapsulation of oxidases as a basic approach to tune the upper detection limit of amperometric biosensors
  212. Conducting polymer based fluorescence quenching as a new approach to increase the selectivity of immunosensors
  213. Biocompatibility of polypyrrole particles: an in-vivo study in mice
  214. Amperometric biosensor for the determination of creatine
  215. Surface plasmon resonance label-free monitoring of antibody antigen interactions in real time
  216. Electrochemical sensors based on conducting polymer—polypyrrole
  217. AFM study of complement system assembly initiated by antigen-antibody complex
  218. AFM study of conducting polymer polypyrrole nanoparticles formed by redox enzyme – glucose oxidase – initiated polymerisation
  219. Redox enzyme – glucose oxidase – initiated synthesis of polypyrrole
  220. Current Trends in Enzymatic Determination of Glycerol
  221. Potentiometric study of quinohemoprotein alcohol dehydrogenase immobilized on the carbon rod electrode
  222. Polypyrrole-coated glucose oxidase nanoparticles for biosensor design
  223. Properties and analytical application of PQQ-dependent glycerol dehydrogenase from Gluconobacter sp. 33
  224. Conducting polymer-based nanostructurized materials: electrochemical aspects
  225. Biofuel cell based on direct bioelectrocatalysis
  226. Molecularly imprinted polypyrrole-based synthetic receptor for direct detection of bovine leukemia virus glycoproteins
  227. Wiring of PQQ–dehydrogenases
  228. Bioelectrochemical sensor based on PQQ-dependent glucose dehydrogenase
  229. Chronic caffeine intake affects lysozyme activity and immune cells in mice
  230. Pulsed amperometric detection of DNA with an ssDNA/polypyrrole-modified electrode
  231. Circulating immune complexes as indicators of environmental contamination
  232. Application of Polypyrrole for the Creation of Immunosensors
  233. Bioelectrochemical application of some PQQ-dependent enzymes
  234. Polypyrrole-Entrapped Quinohemoprotein Alcohol Dehydrogenase. Evidence for Direct Electron Transfer via Conducting-Polymer Chains
  235. Oxygen Insensitive Glucose Biosensor Based on PQQ-Dependent Glucose Dehydrogenase