All Stories

  1. Development of arc welding technique to preclude microsegregation in the dissimilar joint of Alloy C-2000 and C-276
  2. Prospects of pulsed current arc welding on aerospace grade Hastelloy X
  3. Innovation of thermoplastic polymers and metals hybrid structure using friction stir welding technique: challenges and future perspectives
  4. Effect of hot corrosion demeanour on aerospace-grade Hastelloy X made by pulsed and constant current arc welding in molten salts at 820 °C
  5. Effect of inclusions on microstructure and mechanical behavior of multi-pass welded naval grade steel
  6. Effect of Frequency on Microstructural and Corrosion Demeanour of Alloy C-276 Weldment
  7. Effect of Welding Speed on Aspect Ratio of Hastelloy X Weldment by Keyhole Plasma Arc Welding (K-PAW)
  8. Investigation of Air oxidation and hot corrosion behavior of Boiler grade material Austenitic stainless steel AISI 347
  9. Oxidation studies on nickel-base superalloy 617 OCC
  10. COMPARISON OF HOT CORROSION PERFORMANCE OF BARE AND NiCoCrAlY-COATED AUSTENITIC STAINLESS STEEL AISI 347 IN AGGRESSIVE WASTE HEAT INCINERATOR ENVIRONMENT AT 650∘C
  11. Studies on the effect of filler wires on micro level segregation of alloying elements in the alloy 617 weld fusion zone
  12. Investigation on Microstructure and Mechanical Properties of Corrosion Resistance Alloy C-2000 Fabricated by Conventional Arc Welding Technique
  13. Effect of hot corrosion on the bimetallic joints employed in the coal-fired boiler
  14. High Entropy Based Composites - An Overview
  15. An Overview of Quasicrystal Reinforced Magnesium Metal Matrix Composites
  16. Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 254
  17. Tribological Behaviour of Graphite-Reinforced FeNiCrCuMo High-Entropy Alloy Self-Lubricating Composites for Aircraft Braking Energy Applications
  18. Friction based joining process for high strength aerospace aluminium alloy
  19. Effect of Laser Shock Peening on Commercially Pure Titanium-1 Weldment Fabricated by Gas Tungsten Arc Welding Technique
  20. Investigation on the fusion zone microstructures and mechanical integrity of AISI 904L and Inconel 625 weld joints
  21. High temperature corrosion of alloy 617 OCC at 700 °C in simulated USC power plant environment
  22. Behaviour of Alloy 617 OCC Under Hot Corrosion Conditions Encountered in Boilers in A-USC Power Plants
  23. Effect of post-weld heat treatment on the microstructure and tensile properties of electron-beam-welded 21st century nickel-based super alloy 686
  24. Hot Corrosion Studies on Detonation-Gun-Sprayed NiCrAlY and 80Ni–20Cr Coatings on Alloy X22CrMoV12-1 at 600 °C
  25. Argon and argon-hydrogen shielding gas effects on the laves phase formation and corrosion behavior of Inconel 718 gas tungsten arc welds
  26. Failure evaluation of SA 210C riffle water wall tubes in 70 MW CFBC boiler
  27. Investigation of hot corrosion resistance of bare and Ni-20%Cr coated superalloy 825 to Na2SO4-60%V2O5 environment at 900°C
  28. Hot Corrosion of Alloy 617 OCC in Simulated USC Power Plant Environment
  29. Surface modification technique to enhance metallurgical and mechanical properties of alloy C-276 weldment by laser shock peening without coating
  30. Investigation on microstructure and tensile properties of dissimilar weld joints between AISI 316l and duplex 2205 stainless steel
  31. Characterization of microstructure and mechanical properties of nickel based superalloy 617 by pulsed current gas tungsten arc welding technique
  32. Investigation of metallurgical and mechanical properties of 21st century nickel-based superalloy 686 by electron beam welding technique
  33. Investigations on the microstructure and mechanical properties of dissimilar welds of inconel 718 and sulphur rich martensitic stainless steel, AISI 416
  34. Characterization of AA7075 Weldment using CMT Process
  35. Comparative Studies On Corrosion Of Alloy 617 OCC At 700°C In Air And Simulated Coal Ash Environments
  36. Comparative study on metallurgical and mechanical properties of laser and laser-arc-hybrid welding of HSLA steel
  37. Finite Element Analysis of Impression Creep
  38. Hot Corrosion Studies on Dissimilar Weldments C-22 and AISI 316L in the Molten Salt K2SO4 + 60%wt NaCl Environment
  39. Investigation on Microstructure, Micro segregation and Mechanical Properties of ATIG welded Alloy C-276
  40. Investigation on Microstructure, Micro-segregation and Mechanical Properties of Gas Tungsten Arc Weldment of Alloy 600 by ERNiCrMo-10
  41. Investigations on Mechanical and Metallurgical Properties of Pulsed GTA Welded Maraging Steel C300
  42. Investigations on the Microstructure, Microsegregation and Hardness Properties of Bead on Plasma Arc Welded C-276 Alloy
  43. Review on friction stir welding of steels
  44. Role of Process Parameters on Bead geometry and Metallurgical Characteristics in autogenous Gas Tungsten Arc Welding of Maraging Steels (250 grade)
  45. Studies on hot corrosion behaviour of A-TIG welded AISI 316 weldments
  46. Effect of filler metals on the mechanical properties of Inconel 625 and AISI 904L dissimilar weldments using gas tungsten arc welding
  47. Investigation on microstructure and mechanical properties on pulsed current gas tungsten arc welded super alloy 617
  48. Microstructural evolution and precipitation behavior in heat affected zone of Inconel 625 and AISI 904L dissimilar welds
  49. Potentiodynamic corrosion studies on laser beam welded austenitic stainless steel AISI 321
  50. The residual stress distribution of CO2 laser beam welded AISI 316 austenitic stainless steel and the effect of vibratory stress relief
  51. Characterization of Microstructure, Tensile Strength and Corrosion Behavior of Autogenous GTA Welds of Inconel X750 With and Without Activated Compound Flux
  52. The effect of post-weld heat treatment on microstructure and tensile properties of alloy C-276 welded joints fabricated by pulsed current gas tungsten arc welding
  53. Effect of Continuous and Pulsed Current GTA Welding on the Performance of Dissimilar Welds Involving Aerospace Grade Alloys
  54. Comparative Studies on Metallurgical and Mechanical Properties of Bimetallic Combination on Incoloy 800 and SS 316L Fabricated by Gas Metal and Shield Metal Arc Welding
  55. Hot Corrosion Studies on Alloy 617 OCC in the Context of Its Use in Advanced Ultra-Supercritical (A-USC) Power Plants
  56. Hot-corrosion resistance of dissimilar AISI 4340 and AISI 304L weldments in the molten salt environment at 600°C
  57. Analysis of Metallurgical and Mechanical Properties of Continuous and Pulsed Current Gas Tungsten Arc Welded Alloy C-276 with Duplex Stainless Steel
  58. Investigations on the microstructure, tensile strength and high temperature corrosion behaviour of Inconel 625 and Inconel 718 dissimilar joints
  59. Effect of fillers on the microstructure, mechanical properties, and hot corrosion behavior of Nb stabilized austenitic stainless steel welds
  60. Effects of filler metals on the segregation, mechanical properties and hot corrosion behaviour of pulsed current gas tungsten arc welded super-austenitic stainless steel
  61. High Temperature Corrosion studies on Pulsed Current Gas Tungsten Arc Welded Alloy C-276 in Molten Salt Environment
  62. Metallurgical and mechanical properties of laser welded high strength low alloy steel
  63. Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750
  64. Development of pulsed current gas tungsten arc welding technique for dissimilar joints of marine grade alloys
  65. Effect of flux addition on the microstructure and tensile strength of dissimilar weldments involving Inconel 718 and AISI 416
  66. Effect of Filler Metals on the Structure–Property Relationships of Continuous and Pulsed Current GTA Welds of AISI 430 and AISI 904L
  67. Experimental investigations on the SiO2 flux-assisted GTA welding of super-austenitic stainless steels
  68. Comparative studies on the weldability, microstructure and tensile properties of autogeneous TIG welded AISI 430 ferritic stainless steel with and without flux
  69. Structure–property relationships of PCGTA welds of Inconel X750 in as-welded and post-weld heat treated conditions—A comparative study
  70. Studies on microstructure and mechanical properties of keyhole mode Nd:YAG laser welded Inconel 625 and duplex stainless steel, SAF 2205
  71. Studies on the weldability, microstructure and mechanical properties of flux assisted Nd:YAG laser welds of AISI 904L
  72. Investigations on the microstructure and mechanical properties of multi-pass PCGTA welding of super-duplex stainless steel
  73. Metallurgical and mechanical characterization of dissimilar welds of austenitic stainless steel and super-duplex stainless steel – A comparative study
  74. Studies on the weldability, microstructure and mechanical properties of activated flux TIG weldments of Inconel 718
  75. Investigations on Structure–Property Relationships of Inconel 718 and AISI 430 Dissimilar Weldments
  76. Effect of autogeneous GTA welding with and without flux addition on the microstructure and mechanical properties of AISI 904L joints
  77. Investigations on structure–property relationships of activated flux TIG weldments of super-duplex/austenitic stainless steels
  78. Characterization of microstructure and mechanical properties of continuous and pulsed current gas tungsten arc welded superaustenitic stainless steel
  79. Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718
  80. Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel
  81. Characterization of metallurgical and mechanical properties on the multi-pass welding of Inconel 625 and AISI 316L
  82. Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205
  83. Effect of Filler Metals on the Weldability and Mechanical Properties of Multi-pass PCGTA Weldments of AISI 316L
  84. Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750
  85. Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints
  86. Characterization of weld strength and toughness in the multi-pass welding of Inconel 625 and Super-duplex stainless steel UNS S32750
  87. Improvement of Microstructure and Mechanical Behavior of Gas Tungsten Arc Weldments of Alloy C-276 by Current Pulsing
  88. Influence of Filler Metals in the Control of Deleterious Phases During the Multi-pass Welding of Inconel 718 Plates
  89. Investigations on the microstructure and mechanical properties of multi-pass pulsed current gas tungsten arc weldments of Monel 400 and Hastelloy C276
  90. Characterization of microstructure and mechanical properties of Super Ni 718 alloy and AISI 316L dissimilar weldments
  91. Role of pulsed current on metallurgical and mechanical properties of dissimilar metal gas tungsten arc welding of maraging steel to low alloy steel
  92. Influence of filler metals and welding techniques on the structure–property relationships of Inconel 718 and AISI 316L dissimilar weldments
  93. Metallurgical and mechanical characterization of electron beam welded super-duplex stainless steel UNS 32750
  94. Hot corrosion behavior of monel 400 and AISI 304 dissimilar weldments exposed in the molten salt environment containing Na2SO4 + 60% V2O5 at 600 °C
  95. Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques
  96. Characterization of Microstructure, Strength, and Toughness of Dissimilar Weldments of Inconel 625 and Duplex Stainless Steel SAF 2205
  97. Characterization of weld strength and impact toughness in the multi-pass welding of super-duplex stainless steel UNS 32750
  98. Numerical and experimental investigations on laser melting of stainless steel 316L metal powders
  99. Characterization of Microstructure and Mechanical Properties of Inconel 625 and AISI 304 Dissimilar Weldments
  100. Investigations on Mechanical and Metallurgical Properties of Dissimilar Continuous GTA Welds of Monel 400 and C-276
  101. Assessment of Mechanical Properties of AISI 4140 and AISI 316 Dissimilar Weldments
  102. Studies on Effect of Tool Design and Welding Parameters on the Friction Stir Welding of Dissimilar Aluminium Alloys AA 5052 – AA 6061
  103. Mechanical Characterization of Monel 400 and 316 Stainless Steel Weldments
  104. Assessment of Mechanical Properties of PCGTA Weldments of Inconel 625
  105. Investigations on Dissimilar Weldments of Inconel 625 and AISI 304
  106. Assessment on the Metallurgical and Mechanical Properties of SA 210 A1 Rifle Tubular Joints
  107. Comparative Studies of High and Low Frequency Pulsing on the Aspect Ratio of Weld Bead in Gas Tungsten Arc Welded AISI 304L Plates
  108. Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
  109. Influences of Tool Geometry on Metallurgical and Mechanical Properties of Friction Stir Welded Dissimilar AA 2024 and AA 5052
  110. Investigation on the Mechanical Properties of SA 210C Tubular Joints
  111. Micro-segregation Studies on the Continuous Nd: YAG Laser Beam Welded AISI 316L
  112. Optimization of the Pulsed Current Gas Tungsten Arc Welding Process Parameters for alloy C-276 using the Taguchi Method
  113. Studies on Friction Stir Welding of AA 2024 and AA 6061 Dissimilar Metals
  114. Studies on Welding of Maraging Steels
  115. Metallization of Iron Powders by Autocatalytic Copper Plating Process
  116. Comparative studies on GTA and PCGTA weldments of AISI 4140 and AISI 316 dissimilar metals
  117. Wear, Hardness and Corrosion Resistance Characteristics of Tungsten Sulfide Incorporated Electroless Ni-P Coatings
  118. Investigations on the Performance of Gta Welded Dissimilar Aisi 304 and Aisi 310s Subjected to Cyclic Hot Corrosion
  119. Effect of Filler Metal’s Choice on the Mechanical and Corrosion Properties of Gas Tungsten Arc Welded AISI 304l
  120. Effect of Filler Metal’s Choice on the Mechanical and Corrosion Properties of Gas Tungsten Arc Welded Aisi 304l
  121. Studies on Absorptivity and Marangoni Flow during Laser Sintering
  122. Hot Corrosion Behavior of Friction Welded AISI 4140 and AISI 304 in K2SO–60% NaCl Mixture
  123. Hot Corrosion Studies of GTA Welded Monel 400 Exposed to Thin Film of Molten Na2so4 - 60% V2O5 at 600°C
  124. Studies on Thin Film Oxide Formation on GTA Welded AISI 304 & AISI 310S Exposed at 600°C
  125. Effect of filler materials on the performance of gas tungsten arc welded AISI 304 and Monel 400
  126. Assessment of Mechanical and Corrosion Properties of GTA Welded Monel 400 Plates Exposed to Air Oxidation at 700°C
  127. Influence of Filler Materials on Mechanical and Hot Corrosion Properties of Gas Tungsten Arc Welded AISI 304
  128. Evolution of Microstructures on GTA Welded AISI304 Subjected to Hot Corrosion at 700°C under Na2SO4 + V2O5 (60%)
  129. High temperature corrosion studies on friction welded low alloy steel and stainless steel in air and molten salt environment at 650°C
  130. A Comparative Study of Oxidation and Hot Corrosion of Electron Beam Welded Low Alloy Steel and Stainless Steel in Different Corrosive Environments
  131. Hot Corrosion Studies on Gas Tungsten Arc Welded AISI 304 and AISI 4140 Dissimilar Joints
  132. Hot Corrosion Behavior of Dissimilar GTA Welded Monel 400 and AISI 304
  133. Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
  134. Development of Defect Free Monel 400 Welds for Marine Application
  135. Characterisation of Microstructure, Mechanical Properties and Corrosion Behaviour on GTA Welded AISI 310 and Inconel 800
  136. Corrosion Behaviour of Electron Beam Welded AISI 304 and AISI 4140
  137. Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
  138. Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
  139. Hot corrosion studies on dissimilar friction welded low alloy steel and austenitic stainless steel under chlorine containing salt deposits under cyclic conditions
  140. Performance of Al2O3-3%TiO2 Detonation gun coated ferritic steels in coal fired boiler
  141. An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 304
  142. A study on the hot corrosion behavior of Ti–6Al–4V alloy
  143. High temperature corrosion studies on friction-welded dissimilar metals