All Stories

  1. Variables de diseño de cubiertas ventiladas metálicas en el clima cálido húmedo
  2. Thermal Assessment of a Ventilated Double Skin Façade Component with a Set of Air Filtering Photocatalytic Slats in the Cavity
  3. A UPC innovation teaching project for the incorporation of the gender perspective in nautical, marine and naval engineering
  4. Analysis and discussion of maritime accidents in the spanish fishing sector
  5. Monitoring and Calculation Study in Mediterranean Residential Spaces: Thermal Performance Comparison for the Winter Season
  6. The evolution of embodied energy in andean residential buildings. Methodology applied to Cuenca-Ecuador
  7. Data set of climatic factors measured in a low latitude region with warm and humid climate: Solar radiation, cloud cover and sky temperature
  8. From Barcelona to Sicily: An Investigation on the Relationship Between Composition and Daylight in Squares
  9. Renewable Land: Planning the Evolution of Logistic Areas
  10. Techno-economic optimization model for polygeneration hybrid energy storage systems using biogas and batteries
  11. The Energy Consumption of Terraces in the Barcelona Public Space: Heating the Street
  12. Evaluation of Three Lighting Software in the Use of Different Light Intensity Spaces
  13. Heat Flux Balance in Mediterranean Climates: Thermal Insulation Location in Building Enclosures
  14. The Role of Vegetation in Urban Comfort: Surface Temperature Assessment at Street Level
  15. A techno-economic optimization model of a biomass-based CCHP/heat pump system under evolving climate conditions
  16. Sistemas de poligeneración en el ámbito urbano: ventajas e inconvenientes en la actualidad
  17. How Much Does It Cost to Go Off-Grid with Renewables? A Case Study of a Polygeneration System for a Neighbourhood in Hermosillo, Mexico
  18. Buildingmass and Energy Demand in Conventional Housing Typologies of the Mediterranean City
  19. 3E-Analysis of a Bio-Solar CCHP System for the Andaman Islands, India—A Case Study
  20. Assessment of the reflectivity and emissivity impact on light metal roofs thermal behaviour, in warm and humid climate.
  21. Biomass-fired combined cooling, heating and power for small scale applications – A review
  22. Ordering kinetics evaluation of FeAl powders
  23. An Approach to Daylight Contrast Assessment in Mediterranean Urban Environments
  24. Side-View Atmospheres under Outdoor Midday High Luminance
  25. A digital image processing method for urban scenes brightness assessment
  26. Daylight Management in Mediterranean Cities: When Shortage Is Not the Issue
  27. Solar Energy as a Form Giver for Future Cities
  28. Better Than Optimum: Integrated. The Integration of Renewable Energy in Architecture as an Optimization Factor
  29. Behavior of NiTi Wires for Dampers and Actuators in Extreme Conditions
  30. Shape memory alloys as an effective tool to damp oscillations
  31. Functional fatigue recovery of superelastic cycled NiTi wires based on near 100 °C aging treatments
  32. Effect of Thermal Cycling on CuAlAg Shape Memory Alloys
  33. Effects of Strain Aging in NiTi SMA Wire for Dampers
  34. Microstructural effects of strain aging on NiTi pseudoelastic wires by synchrotron X-ray micro-diffraction
  35. Yellow is green: An opportunity for energy savings through colour in architectural spaces
  36. SMA Passive Elements for Damping in the Stayed Cables of Bridges
  37. Mechanical and nanoindentation behavior of TiC–NiTi thermal spray coatings
  38. Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations
  39. Avoiding the Possible Impact of Climate Change on the Built Environment: The Importance of the Building’s Energy Robustness
  40. Damping in civil engineering using SMA Part 2 – particular properties of NiTi for damping of stayed cables in bridges
  41. NiTi Splat Features during Vacuum Thermal Spraying onto Several Substrates
  42. Latin-American Buildings Energy Efficiency Policy: The Case of Chile
  43. Thermomechanical Fatigue Behavior of NiTi Wires
  44. SMA (NiTi): The Coupling between Time, Temperature and Cycling Frequency
  45. Metastable effects on martensitic transformation in SMA
  46. Fatigue of NiTi for Dampers and Actuators
  47. SMA Dampers for Cable Vibration: An Available Solution for Oscillation Mitigation of Stayed Cables in Bridges
  48. SMA (Cu-BASED, NiTi) FOR USE IN DAMPING: THE IMPLICATIONS OF RELIABILITY FOR LONG TIME APPLICATIONS AND AGING BEHAVIOR
  49. SMA in Mitigation of Extreme Loads in Civil Engineering: Damping Actions in Stayed Cables
  50. SMA in Mitigation of Extreme Loads in Civil Engineering: Study of their Application in a Realistic Steel Portico
  51. Structure characterization and wear performance of NiTi thermal sprayed coatings
  52. Pseudoelastic fatigue of NiTi wires: frequency and size effects on damping capacity
  53. Damping in Civil Engineering Using SMA. Part I: Particular Properties of CuAIBe for Damping of Family Houses
  54. Wear and corrosion of metal-matrix (stainless steel or NiTi)-TiC coatings
  55. Comparison of mechanical and tribological properties of TiC–NiTi and TiC–
  56. Metastable effects on martensitic transformation in SMA
  57. Leyes de escala en los espacios urbanos
  58. Damping in Civil Engineering Using SMA. The Fatigue Behavior and Stability of CuAlBe and NiTi Alloys
  59. Oxidation Behaviour of Stainles Steel Matrix with TiC and TiC+TiB2 SHS Powders in a Thermal Spray Process
  60. NiTi thermal sprayed coatings characterization
  61. Low temperature aging behaviour of transformation temperatures in some Cu-based and NiTi SMA
  62. Wear of NiTi coatings obtained by thermal spraying
  63. Choice of SMAs for damping applications in Civil Engineering: simulations and realistic experiments
  64. The SMA properties in civil engineering applications. The SMARTeR project: Use of SMA in damping of stayed cables for bridges
  65. Damping by SMA in Civil Engineering Structures
  66. SMA Fatigue in Civil Engineering Applications
  67. Metastable effects on martensitic transformation in SMA part VII. Aging problems in NiTi
  68. Metastable effects on martensitic transformation in SMA
  69. SMA Fatigue in Civil Engineering Applications
  70. Damping by SMA in Civil Engineering Structures
  71. Metastable effects on martensitic transformation in SMA part V. fatigue-life and detailed hysteresis behavior in NiTi and Cu-based alloys
  72. Scaling laws and the modern city
  73. Built in dampers for family homes via SMA: An ANSYS computation scheme based on mesoscopic and microscopic experimental analyses
  74. Metastable effects on martensitic transformation in SMA
  75. Metastable effects on martensitic transformation in SMA
  76. Metastable effects onmartensitic transformation in SMA
  77. Conditioning treatments of Cu–Al–Be shape memory alloys for dampers
  78. SMA for Dampers in Civil Engineering
  79. Metastable effects on martensitic transformation in SMA (I) recoverable effects by the action of thermodynamic forces in parent phase
  80. Micro and macroscopic effects on the long time guaranteed behaviour of Cu-based shape memory alloys
  81. Physical constraints in SMA applications. One study case: dampers in civil engineering
  82. Shape memory alloys: From the physical properties of metastable phase transitions to dampers for civil engineering applications
  83. Fundamental aspects on the thermoelasticity and pseudoelasticity in single interface transformations
  84. Mesoscale observations and yearly effects in Cu-Zn-Al shape memory alloys: Representative model and predictable damping effects
  85. Damping via Cu-Zn-Al shape memory alloys (SMA): the action of diffusive effects on the macroscopic description
  86. Smart Materials-Fundamentals and Applications. Diffusion Effects on Transformation and Deformation Behavior in Copper-Based Shape Memory Alloys.
  87. Guaranteed behaviour of shape memory alloys : After quench and long time effects in CuZnAl SMA
  88. Model and constitutive equation describing the hysteretic behavior of single crystals in Cu-Zn-Al SMA: from single plate to a collective behavior
  89. Damping in single crystals of Cu-Zn-Al SMA: predictable effects related to external amplitudes and temperature
  90. Guaranteed behavior on SMA: mesoscopic and microscopic analysis of Cu-based alloys
  91. Sun Ducts
  92. Microstructure and Thermodynamics of the Martensitic Transformation
  93. Microstructure and Thermodynamics of the Martensitic Transformation
  94. Shape memory NiTi thin films deposited at low temperature
  95. Low temperature crystallised Ti-rich NiTi shape memory alloy films for microactuators
  96. The Mediterranean blind: Less light, better vision
  97. Experimental approach to the diffusion effects near room temperature in copper - zinc - aluminium shape memory alloys
  98. Ms-Evolution in Cu-Zn-Al SMA. Predictable Temperature and Time Actions on Parent Phase
  99. L'Energia viatja als edificis : introducció a la física del transport d'energia
  100. Predictable behavior of smart materials (Cu-Zn-Al SMA)
  101. Arquitectura i màquina : principis d'instal·lacions als edificis
  102. Time Evolution in Static β-Phase and Dynamic β-Martensite Coexistence (Cu-Zn-Al SMA)
  103. Anisotropic Behaviour in Cu-Zn-Al SMA Due to the Oriented Growth of γ Precipitates
  104. Experimental Studies, Modelling and Simulation of the Hysteresis in SMA Single Crystals : The σ, ε, T and t Coordinate Space
  105. From adapted and computerized thermomechanical equipments to modelling and the time-evolution behaviour in Cu−Zn−Al shape memory alloys
  106. Interaction of single variant martensitic transformation with small γ type precipitates in CuZnAl
  107. Modelling and simulation in SMA
  108. γ precipitates in Cu based SMA: Interface effects and training processes
  109. Cu-Zn-Al SMA: Time dependent processes in the β - m coexistence
  110. Oriented growth of gamma precipitates and TWSME in Cu-Zn-Al
  111. High-resolution equipment for martensitic transformation in shape memory alloys: local studies in stress-strain-temperature
  112. Hysteresis loops in stress induced β-18R martensite transformation in CuZnAl
  113. Shape memory alloys: Local and global transformations by high resolution thermal analysis
  114. Automatic equipment with improved performances (ATD and DSC) in shape memory alloys studies
  115. Summer Comfort in Urban Environment
  116. SMA and SME in Cu-Zn-Al Alloys: Local Studies in α, ε, T Space
  117. Study of the spinodal decomposition of an Fe-28Cr-2Mo-4Ni-Nb alloy by small-angle neutron scattering
  118. Analysis of a martensitic transformation by optical microscopy, acoustic emission detection, resistance measurements and differential scanning calorimetry
  119. Influence of the plastic strain amplitude on the stability of the spinodal microstructure in the cyclic deformation of a Fe-28Cr-2Mo-4Ni-NiNb alloy
  120. The dynamics of bipyramidal ions in magnetoplumbite-like hexagonal ferrite systems revisited
  121. Magnetic frustration and lattice dimensionality in SrCr8Ga4O19
  122. Neutron diffraction study of the crystallographic and magnetic structures of the BaFe12−xMnxO19 m-type hexagonal ferrites
  123. Thermal behaviour of a medieval sheltered building
  124. Hexagonal ferrite particles for perpendicular recording prepared by the precursor method
  125. CEMs and Faraday rotation study of γ-Fe<inf>2</inf>O<inf>3</inf>- Fe<inf>3</inf>O<inf>4</inf>films obtained by a new pyrolisis technique
  126. Cation distribution and random spin canting in LaZnFe 11 O 19
  127. Propriétés magnétiques des ferrites hexagonaux: BaMg2–W et BaCo2–W
  128. Thermal conductivity measurements on samples with low cross-sections
  129. Exchange interactions in BaFe12O19
  130. Mössbauer study of the mixed ferrimagnetic-spin glass phase in SrFe12−x CrxO19 hexagonal ferrites
  131. Hyperfine fields and exchange interactions in BaLiFe17O27 W-type hexagonal ferrite
  132. THERMAL REGULATION OF ATTACHED SOLAR SPACES
  133. DIPOLAR MAGNETIC ANISOTROPY IN SOME UNIAXIAL HEXAGONAL FERRITES
  134. HIGH FIELD MAGNETIZATION STUDY OF SODIUM-ZINC SPINEL FERRITES
  135. PARTICLE SIZE AND MAGNETIC PROPERTIES OF BaFe12O19 PREPARED BY THE ORGANOMETALLIC PRECURSOR METHOD
  136. MAGNETIC PROPERTIES OF BaFe4Mn2O11 R-TYPE HEXAGONAL FERRITE
  137. A simple generalized model for the kinetics of crystallization in metallic glasses
  138. Spin glass behaviour in an antiferromagnetic non-frustrated lattice: Sr 2 FeNbO 6 perovskite
  139. Radioactividad natural en materiales de construcción
  140. On the amorphous to crystalline transformation of Fe80B20 by means of electrical and thermal conductivity, X-ray diffraction, and Mössbauer measurements
  141. Structural and magnetic properties of BaFe12-xMnxO19 hexagonal ferrites
  142. Cation distribution and high field magnetization studies on SrFe<inf>12-x</inf>Cr<inf>x</inf>O<inf>19</inf>
  143. Mössbauer study of bipyramidal site occupancy in BaFe12−xMnxO19
  144. Synthesis, crystal and molecular structure and spectroscopic studies (i.r., electronic,13C-n.m.r. and M�ssbauer) of the perchlorate of nitrosyltetracyanoiron(II)-?-cyano-pentaamminecobalt(III)trihydrate and its chromium(III) analogue
  145. Crystal structure and cationic distribution of BaFe4Ti2O11 R-type hexagonal ferrite
  146. MÖssbauer emission studies of LiNb03:57Co