All Stories

  1. Accuracy of occlusal splints printed in different orientations by liquid crystal display technology: an in vitro study
  2. Effect of Abutment Tooth Geometry On The Accuracy of Fixed Prosthodontics Casts Obtained by Digital and Analog Workflows—In Vitro Study
  3. Effects of Cannabidiol on Bone Quality in Ovariectomized Rats
  4. Enhancing Removable Partial Dentures Hygiene: Investigating Mucolytic Agents and Biocides for Disrupting Biofilms and Improving Antimicrobial Efficacy
  5. Effect of disinfectants on multispecies biofilm, the physical and mechanical properties of polymethyl methacrylate, and the corrosion of cobalt chromium alloy
  6. Metronidazole Modified-Release Therapy Using Two Different Polymeric Systems Gels or Films: Clinical Study for the Treatment of Periodontitis
  7. Assessing the Accuracy, Completeness, and Reliability of Artificial Intelligence-Generated Responses in Dentistry: A Pilot Study Evaluating the ChatGPT Model
  8. Insights into Hypertension: Microbial Load, Salivary Cytokine Levels and Salivary Flow in Edentulous Patients With Complete Dentures: a Case-Control Study
  9. Cafeteria Diet Can Affect Bone Microarchitecture in Sedentary and Trained Male Rats
  10. An in vitro study using confocal laser scanning microscopy to evaluate the marginal misfits of different implant‐supported frameworks
  11. Effectiveness of experimental dentifrices based on essential oils on biofilm on complete dentures: an in vitro study
  12. Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures
  13. Influence of the frameworks of implant-supported prostheses and implant connections on stress distribution
  14. A Cross-Over Randomized Controlled Clinical Trial for Evaluation of Two Hygiene Protocols on Microbial Load, Tissue Health, and Opinion of Ocular Prosthesis Wearers
  15. Risk factors and immunological biomarkers in denture stomatitis: An observational cross-sectional study
  16. Antimicrobial Activity of Experimental Chitosan Solutions on Acrylic Resin and Cobalt-Chromium Surfaces
  17. The long-term effect of sub-boiling water on dental unit waterlines and its ability to control cross-contamination in dentistry
  18. Analysis of stress/strain distribution in dental mini‐implants manufactured by additive manufacturing and machining
  19. Mechanical comparison of milled fiber-reinforced resin composite and Co–Cr frameworks with different connector cross-sectional geometries: An in vitro study
  20. Wear Behavior of Monolithic Zirconia after Staining, Glazing, and Polishing Opposing Dental Restorative Materials: An In Vitro Study
  21. Action of chitosan‐based solutions against a model four‐species biofilm formed on cobalt‐chromium and acrylic resin surfaces
  22. Comparative analysis of Candida spp. isolated from complete denture wearers with and without an HIV diagnosis
  23. Development of an intervertebral disc prosthesis prototype for the canine cervical spine
  24. Finite element analysis of a new intervertebral disc prosthesis developed for the canine cervical spine
  25. Relation between the risk factors for the severity of denture stomatitis and quality of life of complete edentulous individuals: a cross-sectional study
  26. Latex–collagen membrane: an alternative treatment for tibial bone defects
  27. Effect of local hygiene protocols on denture-related stomatitis, biofilm, microbial load, and odor: A randomized controlled trial
  28. Preliminary study on a novel dedicated plate for iliac fractures in dogs
  29. Evaluation of Biomechanical and Stress Distribution of Different Dental Implant Designs: Primary Stability and Photoelastic Analysis
  30. Effect of Denture Hygiene Protocols on Patient Satisfaction, Oral Health‐Related Quality of Life, and Salivary Parameters: A Randomized Clinical Trial
  31. Impact of Endodontic Kinematics on Stress Distribution During Root Canal Treatment: Analysis of Photoelastic Stress
  32. In vitro assessment of polyetheretherketone for an attachment component for an implant-retained overdenture
  33. Electrochemical Behavior of Co-Cr Alloy in Hygienic Tablets Solution
  34. Influence of the Commercial Mouthwashes on the Corrosion Behaviour of Dental Alloy
  35. Effect of oxidation heat treatment with airborne-particle abrasion on the shear bond strength of ceramic to base metal alloys
  36. Evaluation of misfit and stress distribution in implant-retained prosthesis obtained by different methods
  37. Evaluation of tissue in repair with natural latex and / or hyaluronic acid in surgical bone defects
  38. Effectiveness of Oil-Based Denture Dentifrices-Organoleptic Characteristics, Physicochemical Properties and Antimicrobial Action
  39. Distal radius fracture fixation using volar plate: A comparative study evaluating the biomechanical behavior of uni and bicortical distal screws
  40. Using Denture Cleansers to Control Biofilm from Dentures and Brushes: A Randomized Crossover Clinical Trial
  41. Adaptación marginal de coronas de disilicato de litio obtenidas mediante técnicas de escaneo (CAD/CAM): análisis in vitro con microscopía confocal
  42. The Impact of an Ocular Prosthesis on the Quality of Life, Perceived Stress, and Clinical Adaptation of Anophthalmic Patients: A Clinical and Longitudinal Trial
  43. Stress Distribution Analysis of Novel Dental Mini-Implant Designs to Support Overdenture Prosthesis
  44. Bacteriophage Cocktail-Mediated Inhibition of Pseudomonas aeruginosa Biofilm on Endotracheal Tube Surface
  45. Action of disinfectant solutions on adaptive capacity and virulence factors of the Candida spp. biofilms formed on acrylic resin
  46. Biomechanical evaluation of a new femoral stem design for total hip replacement in a canine model
  47. Complete denture hygiene solutions: antibiofilm activity and effects on physical and mechanical properties of acrylic resin
  48. Needle-free anesthesia: clinical efficacy of a mucoadhesive patch for atraumatic anesthesia in dental procedures
  49. Simplified Acid Treatment Technique in Cobalt-Chromium Alloys: Effect on Metal-Ceramic Bond Strength
  50. The effects of three disinfection protocols on Candida spp., denture stomatitis, and biofilm: A parallel group randomized controlled trial
  51. Effect of Cleanser Solutions on the Retention Force of O’ring Attachment: An in Vitro Study
  52. Prevalence and susceptibility profile of Candida spp. isolated from patients in cancer therapy
  53. Identification and Characterization of New Bacteriophages to Control Multidrug-Resistant Pseudomonas aeruginosa Biofilm on Endotracheal Tubes
  54. Antimicrobial activity of effervescent denture tablets on multispecies biofilms
  55. Genomic Evaluation of Formed Biofilm on Dental Implants with Different Surface Treatments Associated with Zirconia or Titanium Abutments: An In Vitro Study
  56. Brushing associated with oral irrigation in maintaining implants and overdentures hygiene – a randomized clinical trial
  57. Effectiveness of Brushing Associated With Oral Irrigation in Maintenance of Peri-Implant Tissues and Overdentures: Clinical Parameters and Patient Satisfaction
  58. Biosafety of Non-Return Valves for Infusion Systems in Radiology
  59. Local anesthetic improves individuals affected with herpes simplex type 1 labialis
  60. In Vitro Antimicrobial Activity of Effervescent Denture Tablets on the Components of Removable Partial Dentures
  61. Topical pilocarpine for xerostomia in patients with head and neck cancer treated with radiotherapy
  62. In vitro digital image correlation analysis of the strain transferred by screw-retained fixed partial dentures supported by short and conventional implants
  63. Adaptation accuracy of milled lithium disilicate crowns: A 2D and 3D microCT analysis
  64. Comparison of Conventional and Pontic Fixed Partial Dentures Over Implants Using the Finite Element Method: Three-Dimensional Analysis of Cortical and Medullary Bone Stress
  65. Influence of metal bar lever-arm on screws detorque for dental prosthesis implant supported
  66. Caries removal with Er:YAG laser followed by dentin biomodification with carbodiimide and chitosan: Wettability and surface morphology analysis
  67. Influence of Different Implants on the Biomechanical Behavior of Tooth-Implant Fixed Partial Dentures: A Three-Dimensional Finite Element Analysis.
  68. Effects of latex membrane on guided regeneration of long bones
  69. Stress distribution of three-unit fixed partial prostheses (conventional and pontic) supported by three or two implants: 3D finite element analysis of ductile materials
  70. Effect of carbamide peroxide bleaching agent on the surface roughness and gloss of a pressable ceramic
  71. Effect of Er:YAG laser irradiation and chitosan biomodification on the stability of resin/demineralized bovine dentin bond
  72. Effect of Denture Cleansers on Cobalt‐Chromium Alloy Surface: A Simulated Period of 5 Years’ Use
  73. Evaluation of Marginal Misfit of Metal Frameworks Welded by Gas-Torch, Laser, and Tungsten Inert Gas Methods
  74. Evaluation of biofilm removal and adverse effects on acrylic resin by diluted concentrations of sodium hypochlorite and Ricinus communis solutions
  75. Effect of Alkaline Peroxides on the Surface of Cobalt Chrome Alloy: An In Vitro Study
  76. Effects of high-impact exercise on the physical properties of bones of ovariectomized rats fed to a high-protein diet
  77. Photoelastic analysis of mandibular full-arch implant-supported fixed dentures made with different bar materials and manufacturing techniques
  78. Low-intensity laser therapy efficacy evaluation in mice subjected to acute arthritis condition
  79. A Digital Image Correlation Analysis of Strain Generated by 3-Unit Implant-Supported Fixed Dental Prosthesis
  80. Comparative analysis of stress in a new proposal of dental implants
  81. Finite Element Analysis of Bone Stress in the Posterior Mandible Using Regular and Short Implants, in the Same Context, with Splinted and Nonsplinted Prostheses
  82. Effect of sodium hypochlorite and Ricinus communis solutions on control of denture biofilm: A randomized crossover clinical trial
  83. Low-intensity laser therapy efficacy evaluation in FVB mice subjected to acute and chronic arthritis
  84. A high-fat diet can affect bone healing in growing rats
  85. The dental alloys determine the choice of composite resins to be used.
  86. A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants
  87. Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses
  88. Effect of treatment with simvastatin on bone microarchitecture of the femoral head in an osteoporosis animal model
  89. Three-Dimensional Finite Element Analysis Surface Stress Distribution on Regular and Short Morse Taper Implants Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges
  90. Analysis of fracture healing in osteopenic bone caused by disuse: experimental study
  91. High-impact exercise in rats prior to and during suspension can prevent bone loss
  92. Influence of treadmill training on bone structure under osteometabolic alteration in rats subjected to high-fat diet
  93. Influence of Temporary Cements on the Bond Strength of Self-Adhesive Cement to the Metal Coronal Substrate
  94. Photoelastic comparison of as-cast and laser-welded implant frameworks
  95. Effects of swimming associated with risedronate in osteopenic bones: An experimental study with ovariectomized rats
  96. Effects of Denture Cleansers on Heat-Polymerized Acrylic Resin: A Five-Year-Simulated Period of Use
  97. Influence of Torsional Strength on Different Types of Dental Implant Platforms
  98. The effect of simvastatin treatment on bone repair of femoral fracture in animal model
  99. Biomechanical Evaluation of a Spinal Screw Fixation System by the Finite Element Method
  100. Biomechanical and microstructural benefits of physical exercise associated with risedronate in bones of ovariectomized rats
  101. Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study
  102. A three-dimensional finite element analysis of the stress distribution on morse taper implants surface
  103. Influence of the Ultimate Torsion on the Geometry of Dental Implants
  104. Retention and stress distribution in distal extension removable partial dentures with and without implant association
  105. Photoelastic Analysis of Stresses Transmitted by Universal Cast to Long Abutment on Implant-Supported Single Restorations Under Static Occlusal Loads
  106. Three-Dimensional Finite Element Analysis of Stress Distribution on Different Bony Ridges With Different Lengths of Morse Taper Implants and Prosthesis Dimensions
  107. Effect of fluoride sodium mouthwash solutions on cpTI: evaluation of physicochemical properties
  108. Abutment Rotational Freedom Evaluation of External Hexagon Single-Implant Restorations after Mechanical Cycling
  109. Effect of different investments and mold temperatures on titanium mechanical properties
  110. Effect of experimental Ricinus communis solution for denture cleaning on the properties of acrylic resin teeth
  111. Evaluation of experimental cleanser solution of Ricinus communis: effect on soft denture liner properties
  112. Comparative study of two commercially pure titanium casting methods
  113. Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents
  114. The Effect of Experimental Denture Cleanser Solution Ricinus communis on Acrylic Resin Properties
  115. Anin vitrostudy of non-axial forces upon the retention of an O-ring attachment
  116. Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists
  117. Bond Strength and Degree of Infiltration between Acrylic Resin Denture Liner after Immersion in Effervescent Denture Cleanser
  118. Effect of fluoride-containing solutions on the surface of cast commercially pure titanium
  119. Accuracy of stone casts obtained by different impression materials
  120. Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures