All Stories

  1. Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers
  2. Effect of hydrogen peroxide on bovine serum albumin adsorption on Ti6Al4V alloy: A scanning Kelvin probe force microscopy study
  3. Effect of Fluid Flow on the Corrosion Performance of as-Cast and Heat-Treated Nickel Aluminum Bronze Alloy (UNS C95800) in Saline Solution
  4. Effect of Substrate Grain Size on Structural and Corrosion Properties of Electrodeposited Nickel Layer Protected with Self-Assembled Film of Stearic Acid
  5. Characterization of the passive layer on ferrite and austenite phases of super duplex stainless steel
  6. Compatibility of fabrication of superhydrophobic surfaces and addition of inhibitors in designing corrosion prevention strategies for electrodeposited nickel in saline solutions
  7. Microscale investigation of the correlation between microstructure and galvanic corrosion of low alloy steel A508 and its welded 309/308L stainless steel overlayer
  8. Synergistic effect of a crystal modifier and screw dislocation step defects on the formation mechanism of nickel micro-nanocone
  9. Characterization of the Native Passive Film on Ferrite and Austenite Phases of Sensitized 2205 Duplex Stainless Steel
  10. Recycled Cobalt from Spent Li-ion Batteries as a Superhydrophobic Coating for Corrosion Protection of Plain Carbon Steel
  11. Inhibitive effect of Clopidogrel as a green corrosion inhibitor for mild steel; statistical modeling and quantum Monte Carlo simulation studies
  12. Insights into Galvanic Corrosion Behavior of Ti-Cu Dissimilar Joint: Effect of Microstructure and Volta Potential
  13. Analysis of internal cracks in Type 304 austenitic stainless steel cladding wall of regenerator column in amine treating unit
  14. TiO2/Cu2O coupled oxide films in Cl− ion containing solution: Volta potential and electronic properties characterization by scanning probe microscopy
  15. Correlation between the histogram and power spectral density analysis of AFM and SKPFM images in an AA7023/AA5083 FSW joint
  16. Characterization of screw dislocation-driven growth in nickel micro-nanostructure electrodeposition process by AFM
  17. Shape evolution of water and saline droplets during icing/melting cycles on superhydrophobic surface
  18. Galvanic corrosion behavior of plain carbon steel-B4C composite
  19. Electrochemical Characterization of Natural Chalcopyrite Dissolution in Sulfuric Acid Solution in Presence of Peroxydisulfate
  20. Enhanced protective properties of epoxy/polyaniline-camphorsulfonate nanocomposite coating on an ultrafine-grained metallic surface
  21. Microstructure and corrosion characterization of the interfacial region in dissimilar friction stir welded AA5083 to AA7023
  22. Facile synthesis and investigation of 1,8-dioxooctahydroxanthene derivatives as corrosion inhibitors for mild steel in hydrochloric acid solution
  23. Electrochemical corrosion behavior of Pb–Ca–Sn–Sm grid alloy in H2SO4 solution
  24. Evaluation of corrosion resistance of polypyrrole/functionalized multi-walled carbon nanotubes composite coatings on 60Cu–40Zn brass alloy
  25. The influence of cold plastic deformation on passivity of Ti-6Al-4V alloy studied by electrochemical and local probing techniques
  26. Fabrication and electrochemical behavior of plain carbon Steel-B4C-W Composite in 3.5 wt % NaCl solution
  27. The Response Surface Method as an Experimental Design Technique to Explore and Model the Performance of Corrosion Inhibitors
  28. Microstructure characterization and electrochemical corrosion behavior of Zn and Zn/Mg alloys in H2SO4 solution
  29. Electrochemical and quantum chemical study of Thiazolo-pyrimidine derivatives as corrosion inhibitors on mild steel in 1M H2SO4
  30. Theoretical and experimental investigations on corrosion control of 65Cu–35Zn brass in nitric acid by two thiophenol derivatives
  31. Water-based acrylic copolymer as an environment-friendly corrosion inhibitor onto carbon steel in 1 M H2SO4 in static and dynamic conditions
  32. Corrosion evaluation of multi-pass welded nickel–aluminum bronze alloy in 3.5% sodium chloride solution: A restorative application of gas tungsten arc welding process
  33. EIS assessment of critical pitting temperature of 2205 duplex stainless steel in acidified ferric chloride solution
  34. The role of constituent phases on corrosion initiation of NiAl bronze in acidic media studied by SEM–EDS, AFM and SKPFM
  35. Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM
  36. Studies on corrosion-inhibiting performance of antithyroid drugs on mild steel in hydrochloric acid
  37. Electrochemical and quantum chemical assessment of two organic compounds from pyridine derivatives as corrosion inhibitors for mild steel in HCl solution under stagnant condition and hydrodynamic flow
  38. The effect of grid configurations on potential and current density distributions in positive plate of lead–acid battery via numerical modeling
  39. Microstructure and corrosion behaviour of plain carbon steel–B 4 C composite
  40. Corrosion Inhibitive Evaluation of an Environmentally Friendly Water-Base Acrylic Terpolymer on Mild Steel in Hydrochloric Acid Media
  41. Imitating seasonal temperature fluctuations for the H2S corrosion of 304L and 316L austenitic stainless steels
  42. New High-Resolution Solution for Measuring Degree of Sensitization of Duplex Stainless Steel 2205 Using Double-Loop Electrochemical Potentiodynamic Reactivation Technique
  43. Water-base acrylic terpolymer as a corrosion inhibitor for SAE1018 in simulated sour petroleum solution in stagnant and hydrodynamic conditions
  44. An insight into the influence of morphological and compositional heterogeneity of an individual intermetallic particle on aluminium alloy corrosion initiation
  45. Theoretical and electrochemical assessment of inhibitive behavior of some thiophenol derivatives on mild steel in HCl
  46. Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3·5%NaCl
  47. Galvanic corrosion of gas tungsten arc repair welds in 17-4PH stainless steel in 3·5% NaCl solution
  48. Microstructural and mechanical properties of friction stir welded Cu–30Zn brass alloy at various feed speeds: Influence of stir bands
  49. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium
  50. Inhibitive effect of synthesized 2-(3-pyridyl)-3,4-dihydro-4-quinazolinone as a corrosion inhibitor for mild steel in hydrochloric acid
  51. Correlation between critical pitting temperature and degree of sensitisation on alloy 2205 duplex stainless steel
  52. Effect of thermomechanical parameters on dynamically recrystallized grain size of AZ91 magnesium alloy
  53. Minuscule device for hydrogen generation/electrical energy collection system on aluminum alloy surface
  54. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1M NaCl at various molybdate concentrations
  55. Improving the corrosion behaviour of powder metallurgical 316L alloy by prepassivation in 20% nitric acid
  56. A comparative H2S corrosion study of 304L and 316L stainless steels in acidic media
  57. Tuning DOS measuring parameters based on double-loop EPR in H2SO4 containing KSCN by Taguchi method
  58. The effect of homogenization on microstructure and hot ductility behaviour of AZ91 magnesium alloy
  59. Developing an AFM-Based SECM System; Instrumental Setup, SECM Simulation, Characterization, and Calibration
  60. Multianalytical and In Situ Studies of Localized Corrosion of EN AW-3003 Alloy—Influence of Intermetallic Particles
  61. The Role of Intermetallic Particles in Localized Corrosion of an Aluminum Alloy Studied by SKPFM and Integrated AFM/SECM
  62. Integrated AFM and SECM for in situ studies of localized corrosion of Al alloys
  63. Probing of local dissolution of Al-alloys in chloride solutions by AFM and SECM
  64. In Situ Investigation of Localized Corrosion of Aluminum Alloys in Chloride Solution Using Integrated EC-AFM/SECM Techniques