All Stories

  1. The effect of absorbed moisture and resin pressure on porosity in autoclave cured epoxy resin
  2. A finite element model for the prediction of porosity in autoclave cured composites
  3. An Overview of the Measurement of Permeability of Composite Reinforcements
  4. The Role of 3D Printing in the Development of a Catalytic System for the Heterogeneous Fenton Process
  5. Age-Related Properties of Aquaponics-Derived Tilapia Skin (Oreochromis niloticus): A Structural and Compositional Study
  6. Rotational moulding of poly-lactic acid; effect of plasticization and degree of crystallinity
  7. The Sorption of Amoxicillin on Engineered Polyethylene Terephthalate Microplastics
  8. A general approach to calculate the stiffness tensor of short‐fiber composites using the fabric tensor determined by X‐ray computed tomography
  9. Shear buckling of aerospace panels made by induction welded thermoplastic matrix composite elements
  10. Autofluorescence of Model Polyethylene Terephthalate Nanoplastics for Cell Interaction Studies
  11. Production and Characterization of Polyethylene Terephthalate Nanoparticles
  12. Time-dependent shape of bistable unsymmetric carbon fibers-epoxy thin laminates
  13. Correlation between elastic properties and morphology in short fiber composites by X-ray computed micro-tomography
  14. Experimental and Numerical Study of Vacuum Resin Infusion of Stiffened Carbon Fiber Reinforced Panels
  15. Deep Control of Linear Oligomerization of Glycerol Using Lanthanum Catalyst on Mesoporous Silica Gel
  16. 3D Printing of Polymer Waste for Improving People’s Awareness about Marine Litter
  17. Out-Of-Plane Permeability Evaluation of Carbon Fiber Preforms by Ultrasonic Wave Propagation
  18. Active SHM for composite pipes using piezoelectric sensors
  19. Stress relaxation in asymmetric bistable composites: Experiments and simulations
  20. Reversible techniques for FRP-confinement of masonry columns
  21. Reliability of Protective Coatings for Flexible Piezoelectric Transducers in Aqueous Environments
  22. A Study on Exfoliation of Expanded Graphite Stacks in Candelilla Wax
  23. Catalytic Activity of Oxidized Carbon Waste Ashes for the Crosslinking of Epoxy Resins
  24. Rheological analysis of thermo-responsive alginate/PNIPAAm graft copolymers synthesized by gamma radiation
  25. Processing of Super Tough Plasticized PLA by Rotational Molding
  26. Highly loaded hydroxyapatite microsphere/ PLA porous scaffolds obtained by fused deposition modelling
  27. Mechanical properties of poly(lactid acid) plasticized by cardanol derivatives
  28. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization
  29. Effects of Blank Quality on Press-Formed PEKK/Carbon Composite Parts
  30. Lay-Up and Consolidation of a Composite Pipe by In Situ Ultrasonic Welding of a Thermoplastic Matrix Composite Tape
  31. Mechanical characterization of bistable laminates for very small aircraft morphing applications
  32. One-step solvent-free process for the fabrication of high loaded PLA/HA composite filament for 3D printing
  33. Thermal analysis of poly(lactic acid) plasticized by cardanol derivatives
  34. Hybrid welding of carbon-fiber reinforced epoxy based composites
  35. Relaxation of residual stresses during curing of polymer matrix composites
  36. Synthesis, Curing, and Properties of an Epoxy Resin Derived from Gallic Acid
  37. UV and thermal stability of soft PVC plasticized with cardanol derivatives
  38. Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites
  39. PolyDiethyleneglycol–bisallyl carbonate matrix transparent nanocomposites reinforced with bacterial cellulose microfibrils
  40. Antimicrobial modified hydroxyapatite composite dental bite by stereolithography
  41. Adhesive joints with improved mechanical properties for aerospace applications
  42. Diffusion in oriented lamellar nanocomposite: Numerical analysis of the effects of dispersion and intercalation
  43. Catalytic Activity of Oxidized Carbon Black and Graphene Oxide for the Crosslinking of Epoxy Resins
  44. Finite element modeling of continuous induction welding of thermoplastic matrix composites
  45. Resin pressure evolution during autoclave curing of epoxy matrix composites
  46. Effect of binder powders added to carbon fiber reinforcements on the chemoreology of an epoxy resin for composites
  47. 3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
  48. Mechanical and durability properties of soft PVC plasticized by cardanol derivatives
  49. Curing and viscoelasticity of vitrimers
  50. Effect of the epoxidation yield of a cardanol derivative on the plasticization and durability of soft PVC
  51. The feasibility of printing polylactic acid-nanohydroxyapatite composites using a low-cost fused deposition modeling 3D printer
  52. Use of cardanol derivatives as plasticizers for PVC
  53. Epoxy Resin Catalyzed by Graphite-Based Nanofillers
  54. Solubility and Durability of Cardanol Derived Plasticizers for Soft PVC
  55. Smoldering and Flame Resistant Textiles via Conformal Barrier Formation
  56. Orientation of Graphene Nanoplatelets in Thermosetting Matrices
  57. Cardanol derivatives as innovative bio-plasticizers for poly-(lactic acid)
  58. A Measure of CNTs Dispersion in Polymers With Branched Molecular Architectures by UDMA
  59. Nanostructured active chitosan-based films for food packaging applications: Effect of graphene stacks on mechanical properties
  60. Development of hybrid cotton/hydrogel yarns with improved absorption properties for biomedical applications
  61. A mathematical modeling approach to optimize composite parts placement in autoclave
  62. Effect of multi-scale diffusion on the permeability behavior of intercalated nanocomposites
  63. Modeling of continuous ultrasonic impregnation and consolidation of thermoplastic matrix composites
  64. A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation
  65. Rotational moulding of poly-lactic acid
  66. Resin flow and void formation in an autoclave cure cycle
  67. Graphene oxide as a catalyst for ring opening reactions in amine crosslinking of epoxy resins
  68. SOLUBILITY AND DURABILITY OF CARDANOL DERIVED PLASTICIZERS FOR SOFT PVC
  69. Rotational Molding of Poly(lactic acid): Effect of Polymer Grade and Granulometry
  70. Finite element simulation and analytical modeling of 3D multi scale diffusion in nanocomposites with permeable stacks
  71. Mechanical behavior of fibers and films based on PP/Quartz composites
  72. Rotational molding of biodegradable composites obtained with PLA reinforced by the wooden backbone of opuntia ficus indica cladodes
  73. Fabrication of a thermoplastic matrix composite stiffened panel by induction welding
  74. Structural behaviour modelling of bolted joints in composite laminates subjected to cyclic loading
  75. Ultrasonic Assisted Consolidation of Commingled Thermoplastic/Glass Fiber Rovings
  76. Analysis of the Suitability of Poly(lactic acid) in Rotational Molding Process
  77. Processing and characterization of amorphous polyethylene terephthalate fibers for the alignment of carbon nanofillers in thermosetting resins
  78. A magnetic and highly reusable macroporous superhydrophobic/superoleophilic PDMS/MWNT nanocomposite for oil sorption from water
  79. Solubility and durability of cardanol derived plasticizers for soft PVC
  80. Cure reaction of epoxy resins catalyzed by graphite-based nanofiller
  81. Finite Element Modeling of Multiscale Diffusion in Intercalated Nanocomposites
  82. Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering
  83. Mechanical properties of basalt fibers and their adhesion to polypropylene matrices
  84. Catalytic activity of graphite-based nanofillers on cure reaction of epoxy resins
  85. A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation
  86. A methodology to orient carbon nanotubes in a thermosetting matrix
  87. Sintering of PLLA powders for rotational molding
  88. Analysis and Characterization of the Mechanical Structure for the I-Tracker of the Mu2e Experiment
  89. Rotational molding of bio-polymers
  90. Carbon nanotube alignment in a thermosetting resin
  91. Rotational molding of pultruded profiles reinforced polyethylene
  92. Development of semi- and grafted interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and collagen
  93. Selective reinforcement of LLDPE components produced by rotational molding with thermoplastic matrix pultruded profiles
  94. Replicating degradable artefacts. A project for analysis and exhibition of early medieval objects from the Byzantine village at Scorpo (Supersano, Italy)
  95. Monitoring the Cure State of Thermosetting Resins by Ultrasound
  96. Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae
  97. Experimental measurement of transversal micro- and macro permeability during compression molding of PP/Glass composites
  98. Transport properties of graphite/epoxy composites: Thermal, permeability and dielectric characterization
  99. Ultra-low mass drift chambers
  100. Polymer Nanocomposites Characterized by Thermal Analysis Techniques
  101. A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers
  102. Potential of Cellulose-Based Superabsorbent Hydrogels as Water Reservoir in Agriculture
  103. Development and Characterization of Amorphous Thermoplastic Matrix Graphene Nanocomposites
  104. Monitoring Wood Degradation during Weathering by Cellulose Crystallinity
  105. Effect of the addition of organically modified nanofiller on the relaxation behavior of a thermoplastic amorphous matrix
  106. Antibacterial natural leather for application in the public transport system
  107. An Overview of Progress and Current Challenges in Ultrasonic Treatment of Polymer Melts
  108. The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks
  109. Echographic detectability of optoacoustic signals from low-concentration PEG-coated gold nanorods
  110. Thermoplastic Composite Manufacturing Cost Analysis
  111. Thermoforming of Thermoplastics Matrix Composites
  112. Rotational Molding of Polyamide-6 Nanocomposites with Improved Flame Retardancy
  113. Optimization of Parts Placement in Autoclave Processing of Composites
  114. Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix
  115. Low-velocity impact response in composite plates embedding shape memory alloy wires
  116. Silver-coated wool yarns with durable antibacterial properties
  117. Analysis of ageing of amorphous thermoplastic polymers by PVT analysis
  118. Engineering Nanostructured Silver Coatings for Antimicrobial Applications
  119. Ultrasonic transducers for cure monitoring: design, modelling and validation
  120. Micro- and macro-impregnation of fabrics using thermoplastic matrices
  121. Processing and Properties of a Polymer/Composite Double-Layer Laminate
  122. An investigation into sintering of PA6 nanocomposite powders for rotational molding
  123. Curing Agent
  124. Antibacterial coatings on haemodialysis catheters by photochemical deposition of silver nanoparticles
  125. On-line Consolidation of Commingled Polypropylene/Glass Roving During Filament Winding
  126. Effects of diffusion of a naturally-derived plasticizer from soft PVC
  127. Hepatic Vessel Segmentation for 3D Planning of Liver Surgery
  128. Assessment of the relevance of sintering in thermoplastic commingled yarn consolidation
  129. Evaluation of the degree of dispersion of nanofillers by mechanical, rheological, and permeability analysis
  130. Plasticizer for poly(vinyl chloride) from cardanol as a renewable resource material
  131. Dwarf-green coconut fibers: A versatile natural renewable raw bioresource. Treatment, morphology, and physicochemical properties
  132. Cardanol Based Matrix for Jute Reinforced Pipes
  133. Processing, mechanical properties, and interfacial bonding of a thermoplastic core-foam/composite-skin sandwich panel
  134. Analysis of the structure and mass transport properties of clay nanocomposites based on amorphous PET
  135. Numerical simulation of the microscale impregnation in commingled thermoplastic composite yarns
  136. Preface to the special issue: Thermoplastic composite materials
  137. Water Vapor Permeability of Clay Nanocomposites Based on Amorphous PET
  138. Development and characterization of cellulose-based hydrogels for use as dietary bulking agents
  139. Structural relaxation of amorphous PET matrix nanocomposites
  140. Nanofilled polyols for viscoelastic polyurethane foams
  141. Effect of a Nanodispersed Clay Fillers on Glass Transition of Thermosetting Polyurethane
  142. Effects of thermal history in the ring opening polymerization of CBT and its mixtures with montmorillonite on the crystallization of the resulting poly(butylene terephthalate)
  143. Analysis of the structure and mass transport properties of nanocomposite polyurethane
  144. Synthesis and characterization of optically transparent epoxy matrix nanocomposites
  145. Characterization of antibacterial silver coated yarns
  146. Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength
  147. Collagen- and gelatine-based films sealing vascular prostheses: evaluation of the degree of crosslinking for optimal blood impermeability
  148. UV-curable epoxy systems containing hyperbranched polymers: Kinetics investigation by photo-DSC and real-time FT-IR experiments
  149. Mechanical and Vibration Characteristics of Laminated Composite Plates Embedding Shape Memory Alloy Superelastic Wires
  150. Glass transition in thermosetting clay-nanocomposite polyurethanes
  151. Polymer characterization by ultrasonic wave propagation
  152. Embedding of Superelastic SMA Wires into Composite Structures: Evaluation of Impact Properties
  153. Development and characterisation of jute reinforced natural matrix composites
  154. Nonsupercritical synthesis of microporous gels
  155. Novel superabsorbent cellulose-based hydrogels crosslinked with citric acid
  156. Hydrogel based tissue mimicking phantom forin-vitroultrasound contrast agents studies
  157. Spring-in angle as molding distortion for thermoplastic matrix composite
  158. Photo – DSC and real time – FT-IR kinetic study of a UV curable epoxy resin containing o-Boehmites
  159. Efficient utilization of plastic waste through product design and process adaptation: A case study on stiffness enhancement of beams produced from plastic lumber
  160. Synthesis and characterization of clay-nanocomposite solvent-based polyurethane adhesives
  161. Correction of melting peaks of different PE grades accounting for heat transfer in DSC samples
  162. CLAY-NANOCOMPOSITES POLYURETHANE ADHESIVES : ANALYSIS OF THE RIGID AMORPHOUS FRACTION
  163. Acrylic-based hydrogel phantom forin vitroultrasound contrast agent characterization
  164. Spin coating cellulose derivatives on quartz crystal microbalance plates to obtain hydrogel-based fast sensors and actuators
  165. Air-Coupled Ultrasound: A Novel Technique for Monitoring the Curing of Thermosetting Matrices
  166. Flexural creep behaviour of PP matrix woven composite
  167. Air-Coupled Ultrasonic Cure Monitoring of Unsaturated Polyester Resins
  168. Synthesis of a novel cardanol-based benzoxazine monomer and environmentally sustainable production of polymers and bio-composites
  169. Air-coupled ultrasonic cure monitoring of composite matrices
  170. A preliminary study on bladder-assisted rotomolding of thermoplastic polymer composites
  171. Recycling of PP-based Sandwich Panels with Continuous Fiber Composite Skins
  172. Synthesis and characterization of macroporous poly(ethylene glycol)-based hydrogels for tissue engineering application
  173. Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis
  174. Ceramic Composites for Automotive Friction Devices
  175. Ceramic Composites for Automotive Friction Devices
  176. Free form fabrication of silica moulds for aluminium casting by stereolithography
  177. Ultrasonic investigation of wheat starch retrogradation
  178. Viscoelastic and thermal characterization of crosslinked PVC
  179. Temperature evolution during stereolithography building with a commercial epoxy resin
  180. A cellulose-based hydrogel as a potential bulking agent for hypocaloric diets: Anin vitro biocompatibility study on rat intestine
  181. Preformed microspherical inclusions for rheological control and physical property modification of epoxy resins
  182. Development of polymeric foams from recycled polyethylene and recycled gypsum
  183. Crosslinking of cellulose derivatives and hyaluronic acid with water-soluble carbodiimide
  184. Ultrasonic Dynamic Mechanical Analysis of Polymers
  185. Time–temperature and time-irradiation intensity superposition for photopolymerization of an epoxy based resin
  186. Silica moulds built by stereolithography
  187. Monitoring the drying process of lasagna pasta through a novel sensing device-based method
  188. Laser stereolithography of ZrO2 toughened Al2O3
  189. Polymeric meshes for internal sutures with differentiated adhesion on the two sides
  190. Ultrasonic monitoring of the network formation in superabsorbent cellulose based hydrogels
  191. The Retrogradation of Concentrated Wheat Starch Systems
  192. Relaxations during the postcure of unsaturated polyester networks by ultrasonic wave propagation, dynamic mechanical analysis, and dielectric analysis
  193. Simultaneous gravimetric and calorimetric analysis of chloroform sorption in nanoporous semicrystalline sPS
  194. Laser stereolithography of ZrO2 toughened Al2O3
  195. Porous Garnet Coatings Tailoring the Emissivity of Thermostructural Materials
  196. Kinetic Studies of Liquid Crystalline and Isotropic Vinyl Ester Resins
  197. Cardanol based matrix biocomposites reinforced with natural fibres
  198. Phase transformations during the cure of unsaturated polyester resins
  199. Powder-shape analysis and sintering behavior of high-density polyethylene powders for rotational molding
  200. Processing-properties relationship of sandwich panels with polypropylene-core and polypropylene-matrix composite skins
  201. Photopolymerization kinetics of an epoxy-based resin for stereolithography
  202. Cellulose Derivative−Hyaluronic Acid-Based Microporous Hydrogels Cross-Linked through Divinyl Sulfone (DVS) To Modulate Equilibrium Sorption Capacity and Network Stability
  203. Evaluation of the degree of cross-linking of cellulose-based superabsorbent hydrogels: a comparison between different techniques
  204. Introduction of molecular spacers between the crosslinks of a cellulose-based superabsorbent hydrogel: Effects on the equilibrium sorption properties
  205. Statistical and kinetic approaches for linear low-density polyethylene melting modeling
  206. The challenge of high-performance selective emitters for thermophotovoltaic applications
  207. Erbium containing ceramic emitters for thermophotovoltaic energy conversion
  208. Simulation of heat transfer during rotational molding
  209. Cure kinetics and properties of epoxy resins containing a phosphorous-based flame retardant
  210. Network development during epoxy curing: experimental ultrasonic data and theoretical predictions
  211. Ceramic Components Built by Stereolithography
  212. Influence of crystal and amorphous phase morphology on hydrolytic degradation of PLLA subjected to different processing conditions
  213. Correlation Between Ultrasonic and Static Mechanical Properties During Curing of Cold-Curing Epoxy Adhesives
  214. Effect of hydroxides and hydroxycarbonate structure on fire retardant effectiveness and mechanical properties in ethylene-vinyl acetate copolymer
  215. Glass–rubber phase transformation detected in polymers by means of ultrasonic waves
  216. Nondestructive and in-situ monitoring of mechanical property buildup in epoxy adhesives for civil applications by propagation of ultrasonic waves
  217. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation
  218. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation
  219. Ultrasonic characterization of the kinetics of water sorption in hydrogels
  220. Effect of irradiation intensity on the isothermal photopolymerization kinetics of acrylic resins for stereolithography
  221. Degradation behaviour of a composite material for thermal protection systemsPart II Process simulation
  222. Degradation behaviour of a composite material for thermal protection systems Part I–Experimental characterization
  223. Ultrasonic characterization of water sorption in poly(2-hydroxyethyl methacrylate) hydrogels
  224. Determination of the crystallization enthalpy of new-TPI
  225. A study of the water sorption kinetic of Poly(HEMA) hydrogels by SLAM and FT-IR measurements
  226. Polymerization kinetics of acrylic bone cements by differential scanning calorimetry
  227. Ultrasonic wave attenuation during water sorption in poly(2-hydroxyethyl methacrylate) hydrogels
  228. Bulk Crystllization Kinetics of New TPI (Thermoplastic Poly Imide) by Differential Calorimetric Analysis
  229. On the physical dimensions of the Avrami constant
  230. Thermal analysis of visible-light-activated dental composites
  231. A macrokinetic approach to crystallization applied to a new thermoplastic polyimide (New TPI) as a model polymer
  232. Cure behaviour of visible light activated dental composites
  233. Cure behaviour of visible light activated dental composites
  234. Process Modelling of Thermoset Based Composites
  235. Photopolymerization of dental composite matrices
  236. Determination of the water absorption kinetics in hydrogels by SLAM
  237. Correlation between dielectric and chemorheological properties during cure of epoxy-based composites
  238. A new kinetic model for polymer crystallization derived by calorimetric analysis
  239. The principles of dielectric measurements for in situ monitoring of composite processing
  240. Dielectric characterization of water sorption in epoxy resin matrices
  241. A macrokinetic approach to crystallization modelling of semicrystalline thermoplastic matrices for advanced composites
  242. Science and Technology of Polymer Composites
  243. Modeling of the dynamic mechanical properties of semicrystalline thermoplastic matrix composites
  244. Thermal analysis of thermoplastic matrices for advanced composite materials: poly(phenylene sulphide)
  245. Crystallization kinetics of poly(phenylene sulfide) (PPS) and PPS/carbon fiber composites
  246. Mathematical modeling of the pultrusion of epoxy based composites
  247. A model for the thermal and chemorheological behavior of thermoset processing: (II) Unsaturated polyester based composites