Alexandre Dolgui

All Stories

1. 
   Three parallel task assignment problems with shared resources

   Article • IISE Transactions, November 2019, Taylor & Francis

   Alexandre Dolgui

2. 
   Ripple effect quantification by supplier risk exposure assessment

   Article • International Journal of Production Research, October 2019, Taylor & Francis

   Alexandre Dolgui, Aseem Kinra

3. 
   Ripple effect modelling of supplier disruption: integrated Markov chain and dynamic Bayesian network approach

   Article • International Journal of Production Research, September 2019, Taylor & Francis

   Alexandre Dolgui, Seyedmohsen Hosseini

4. 
   Option contracts for online celebrities as retailers in supply chains

   Article • International Journal of Production Research, August 2019, Taylor & Francis

   Alexandre Dolgui

5. 
   Selected surveys on cutting edge problems in Production Research

   Article • International Journal of Production Research, August 2019, Taylor & Francis

   Alexandre Dolgui

6. 
   Optimisation of the aggregation and execution rates for intersecting operation sets: an example of machining process design

   Article • International Journal of Production Research, June 2019, Taylor & Francis

   Alexandre Dolgui

7. 
   Does the ripple effect influence the bullwhip effect? An integrated analysis of structural and operational dynamics in the supply chain

   Article • International Journal of Production Research, June 2019, Taylor & Francis

   Alexandre Dolgui

8. 
   Blockchain-oriented dynamic modelling of smart contract design and execution in the supply chain

   Article • International Journal of Production Research, June 2019, Taylor & Francis

   Prof. Dr. Frank Werner, Alexandre Dolgui

9. 
   Integrated production planning and quality control for linear production systems under uncertainties of cycle time and finished product quality

   Article • International Journal of Production Research, May 2019, Taylor & Francis

   Alexandre Dolgui

10. 
    Design for manufacturing and assembly/disassembly: joint design of products and production systems

    Article • International Journal of Production Research, December 2018, Taylor & Francis

    Alexandre Dolgui

11. 
    Sample average approximation for multi-vehicle collection–disassembly problem under uncertainty

    Article • International Journal of Production Research, September 2018, Taylor & Francis

    Alexandre Dolgui

12. 
    Low-Certainty-Need (LCN) supply chains: a new perspective in managing disruption risks and resilience

    Article • International Journal of Production Research, September 2018, Taylor & Francis

    Alexandre Dolgui

13. 
    Comparative Analysis of Heuristic Algorithms Used for Solving a Production and Maintenance Planning Problem (PMPP)

    Article • Applied Sciences, July 2018, MDPI AG

    Alexandre Dolgui

14. 
    The impact of digital technology and Industry 4.0 on the ripple effect and supply chain risk analytics

    Article • International Journal of Production Research, June 2018, Taylor & Francis

    Alexandre Dolgui

15. 
    General parametric scheme for the online uniform machine scheduling problem with two different speeds

    Article • Information Processing Letters, June 2018, Elsevier

    Alexandre Dolgui

16. 
    Minimizing the Number of Workers in a Paced Mixed-Model Assembly Line

    Article • European Journal of Operational Research, June 2018, Elsevier

    Alexandre Dolgui

17. 
    Optimal Control Algorithms and Their Analysis for Short-Term Scheduling in Manufacturing Systems

    Article • Algorithms, May 2018, MDPI AG

    Alexandre Dolgui

18. 
    Dynamic optimisation for highly agile supply chains in e-procurement context

    Article • International Journal of Production Research, April 2018, Taylor & Francis

    Alexandre Dolgui

19. 
    Scheduling in production, supply chain and Industry 4.0 systems by optimal control: fundamentals, state-of-the-art and applications

    Article • International Journal of Production Research, March 2018, Taylor & Francis

    Alexandre Dolgui

20. 
    Recent advances and opportunities in sustainable food supply chain: a model-oriented review

    Article • International Journal of Production Research, January 2018, Taylor & Francis

    Alexandre Dolgui

21. 
    Leading scholars in Production Research for the 55th volume anniversary of IJPR

    Article • International Journal of Production Research, January 2018, Taylor & Francis

    Alexandre Dolgui

22. 
    Profit-oriented partial disassembly line design: dealing with hazardous parts and task processing times uncertainty

    Article • International Journal of Production Research, January 2018, Taylor & Francis

    Alexandre Dolgui

23. 
    Optimal workforce assignment to operations of a paced assembly line

    Article • European Journal of Operational Research, January 2018, Elsevier

    Alexandre Dolgui

24. 
    Simulation Vs. Optimization Approaches to Ripple Effect Modelling in the Supply Chain

    Article • January 2018, Springer Science + Business Media

    Alexandre Dolgui

25. 
    Optimal due date quoting for a risk-averse decision-maker under CVaR

    Article • International Journal of Production Research, December 2017, Taylor & Francis

    Alexandre Dolgui

26. 
    Scheduling of truck arrivals, truck departures and shop-floor operation in a cross-dock platform, based on trucks loading plans

    Article • International Journal of Production Economics, December 2017, Elsevier

    Alexandre Dolgui

27. 
    Optimising integrated inventory policy for perishable items in a multi-stage supply chain

    Article • International Journal of Production Research, November 2017, Taylor & Francis

    Alexandre Dolgui

28. 
    Scheduling of recovery actions in the supply chain with resilience analysis considerations

    Article • International Journal of Production Research, November 2017, Taylor & Francis

    Alexandre Dolgui

29. 
    Planned lead times optimization for multi-level assembly systems under uncertainties

    Article • Omega, November 2017, Elsevier

    Alexandre Dolgui

30. 
    Disruptions in logistics systems and how reduce them: a survey

    Article • International Journal of Production Research, October 2017, Taylor & Francis

    Alexandre Dolgui

31. 
    Artificial intelligence in engineering risk analytics

    Article • Engineering Applications of Artificial Intelligence, October 2017, Elsevier

    Alexandre Dolgui

32. 
    Supply chain coordination through integration of innovation effort and advertising support

    Article • Applied Mathematical Modelling, September 2017, Elsevier

    Alexandre Dolgui

33. 
    A multi-period inventory transportation model for tactical planning of food grain supply chain

    Article • Computers & Industrial Engineering, August 2017, Elsevier

    Alexandre Dolgui

34. 
    An efficient two-phase iterative heuristic for Collection-Disassembly problem

    Article • Computers & Industrial Engineering, August 2017, Elsevier

    Alexandre Dolgui

35. 
    Analysis of a multicriterial buffer capacity optimization problem for a production line

    Article • Automation and Remote Control, July 2017, Pleiades Publishing Ltd

    Alexandre Dolgui

36. 
    Optimal control representation of the mathematical programming model for supply chain dynamic reconfiguration

    Article • IFAC-PapersOnLine, July 2017, Elsevier

    Alexandre Dolgui

37. 
    Random lead times in replenishment planning for single-level assembly systems: The value of information

    Article • IFAC-PapersOnLine, July 2017, Elsevier

    Alexandre Dolgui

38. 
    Some new ideas for assembly line balancing research

    Article • IFAC-PapersOnLine, July 2017, Elsevier

    Alexandre Dolgui

39. 
    Literature review on disruption recovery in the supply chain

    Article • International Journal of Production Research, June 2017, Taylor & Francis

    Alexandre Dolgui

40. 
    Minimizing the number of stations and station activation costs for a production line

    Article • Computers & Operations Research, March 2017, Elsevier

    Alexandre Dolgui

41. 
    Using common weights and efficiency invariance principles for resource allocation and target setting

    Article • International Journal of Production Research, February 2017, Taylor & Francis

    Alexandre Dolgui

42. 
    A Dynamic Approach to Multi-stage Job Shop Scheduling in an Industry 4.0-Based Flexible Assembly System

    Article • January 2017, Springer Science + Business Media

    Alexandre Dolgui

43. 
    Collection-disassembly problem in reverse supply chain

    Article • International Journal of Production Economics, January 2017, Elsevier

    Alexandre Dolgui

44. 
    Hybrid Fuzzy-Probabilistic Approach to Supply Chain Resilience Assessment

    Article • IEEE Transactions on Engineering Management, January 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Alexandre Dolgui

45. 
    Approvisionnement d’une chaîne logistique agile. Une approche d’optimisation dynamique

    Article • Journal Européen des Systèmes Automatisés, December 2016, Lavoisier

    Alexandre Dolgui

46. 
    55th anniversary of Production Research

    Article • International Journal of Production Research, December 2016, Taylor & Francis

    Alexandre Dolgui

47. 
    Optimal supply planning for two-levels assembly system with stochastic lead-times and maintenance actions

    Article • December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Alexandre Dolgui

48. 
    Stability radii of optimal assembly line balances with a fixed workstation set

    Article • International Journal of Production Economics, December 2016, Elsevier

    Alexandre Dolgui

49. 
    Integrated process planning and system configuration for mixed-model machining on rotary transfer machine

    Article • International Journal of Computer Integrated Manufacturing, November 2016, Taylor & Francis

    Alexandre Dolgui

50. 
    Component replenishment planning for a single-level assembly system under random lead times: A chance constrained programming approach

    Article • International Journal of Production Economics, November 2016, Elsevier

    Alexandre Dolgui

51. 
    Prise en compte de l’état des produits pour la planification de leur désassemblage

    Article • Journal Européen des Systèmes Automatisés, October 2016, Lavoisier

    Alexandre Dolgui

52. 
    A solution approach based on beam search algorithm for disassembly line balancing problem

    Article • Journal of Manufacturing Systems, October 2016, Elsevier

    Alexandre Dolgui

53. 
    A new effective dynamic program for an investment optimization problem

    Article • Automation and Remote Control, September 2016, Pleiades Publishing Ltd

    Prof. Dr. Frank Werner, Alexandre Dolgui

54. 
    Decision support for design of reconfigurable rotary machining systems for family part production

    Article • International Journal of Production Research, August 2016, Taylor & Francis

    Alexandre Dolgui

55. 
    Maximizing the robustness for simple assembly lines with fixed cycle time and limited number of workstations

    Article • Discrete Applied Mathematics, July 2016, Elsevier

    Alexandre Dolgui

56. 
    Disruption-driven supply chain (re)-planning and performance impact assessment with consideration of pro-active and recovery policies

    Article • Transportation Research Part E Logistics and Transportation Review, June 2016, Elsevier

    Alexandre Dolgui

57. 
    Knapsack problem with objective value gaps

    Article • Optimization Letters, May 2016, Springer Science + Business Media

    Alexandre Dolgui

58. 
    Robust dynamic schedule coordination control in the supply chain

    Article • Computers & Industrial Engineering, April 2016, Elsevier

    Alexandre Dolgui

59. 
    Dynamic recovery policies for time-critical supply chains under conditions of ripple effect

    Article • International Journal of Production Research, March 2016, Taylor & Francis

    Alexandre Dolgui

60. 
    Low carbon economy and equitable society: production, supply chain, and operations management perspectives

    Article • Journal of Cleaner Production, March 2016, Elsevier

    Alexandre Dolgui, Dr. Zhi-Hai Zhang

61. 
    Schedule robustness analysis with the help of attainable sets in continuous flow problem under capacity disruptions

    Article • International Journal of Production Research, January 2016, Taylor & Francis

    Prof. Dr. Frank Werner, Alexandre Dolgui

62. 
    Optimization Approaches for Multi-level Assembly Systems Under Stochastic Lead Times

    Article • January 2016, Springer Science + Business Media

    Alexandre Dolgui

63. 
    A multi-objective approach for design of reconfigurable transfer lines

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

64. 
    Cross-docking Operation Scheduling: Truck Arrivals, Shop-Floor Activities and Truck Departures

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

65. 
    Design of a Multi-agent System to Manage Relay Intercity Freighting

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

66. 
    Disruptions in supply chains and recovery policies: state-of-the art review

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

67. 
    Heuristics for Batch Machining at Reconfigurable Rotary Transfer Machines

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

68. 
    Optimization of the Structure and Execution Modes of Intersecting Operation Sets

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Alexandre Dolgui

69. 
    Towards green automated production line with rotary transfer and turrets: a multi-objective approach using a binary scatter tabu search procedure

    Article • International Journal of Computer Integrated Manufacturing, December 2015, Taylor & Francis

    Alexandre Dolgui

70. 
    Workforce minimization for a mixed-model assembly line in the automotive industry

    Article • International Journal of Production Economics, December 2015, Elsevier

    Alexandre Dolgui

71. 
    Approximate solution of a profit maximization constrained virtual business planning problem

    Article • Omega, December 2015, Elsevier

    Alexandre Dolgui

72. 
    Decision making in enterprise risk management: A review and introduction to special issue

    Article • Omega, December 2015, Elsevier

    Alexandre Dolgui

73. 
    Enumerations and stability analysis of feasible and optimal line balances for simple assembly lines

    Article • Computers & Industrial Engineering, December 2015, Elsevier

    Alexandre Dolgui

74. 
    Second order conic approximation for disassembly line design with joint probabilistic constraints

    Article • European Journal of Operational Research, December 2015, Elsevier

    Alexandre Dolgui

75. 
    Flow line balancing problem: A survey

    Article • October 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Alexandre Dolgui

76. 
    A review on the buyer–supplier dyad relationships in sustainable procurement context: past, present and future

    Article • International Journal of Production Research, August 2015, Taylor & Francis

    Alexandre Dolgui

77. 
    Ergonomics in assembly line balancing based on energy expenditure: a multi-objective model

    Article • International Journal of Production Research, August 2015, Taylor & Francis

    Alexandre Dolgui

78. 
    Lateral inventory transshipment problem in online-to-offline supply chain

    Article • International Journal of Production Research, July 2015, Taylor & Francis

    Alexandre Dolgui

79. 
    Single-period inventory model for one-level assembly system with stochastic lead times and demand

    Article • International Journal of Production Research, July 2015, Taylor & Francis

    Alexandre Dolgui

80. 
    Cost optimization for series–parallel execution of a collection of intersecting operation sets

    Article • Engineering Optimization, July 2015, Taylor & Francis

    Alexandre Dolgui

81. 
    A decomposition based solution algorithm for U-type assembly line balancing with interval data

    Article • Computers & Operations Research, July 2015, Elsevier

    Alexandre Dolgui

82. 
    Two-station single-track railway scheduling problem with trains of equal speed

    Article • Computers & Industrial Engineering, July 2015, Elsevier

    Alexandre Dolgui

83. 
    Structural quantification of the ripple effect in the supply chain

    Article • International Journal of Production Research, June 2015, Taylor & Francis

    Alexandre Dolgui

84. 
    Distribution and operation planning at a cross-dock platform: A case of study at Renault

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Alexandre Dolgui

85. 
    Re-balancing problem for assembly lines: new mathematical model and exact solution method

    Article • Assembly Automation, February 2015, Emerald

    Mr olayinka mohammed olabanji, Alexandre Dolgui

86. 
    A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0

    Article • International Journal of Production Research, January 2015, Taylor & Francis

    Prof. Dr. Frank Werner, Alexandre Dolgui

87. 
    Coordination of Collection and Disassembly Planning for End-of-Life ProductÕ

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

88. 
    A bibliographic review of production line design and balancing under uncertainty

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

89. 
    A memetic algorithm for a stochastic lot-sizing and sequencing problem

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

90. 
    A review of cost and profit oriented line design and balancing problems and solution approaches

    Article • Annual Reviews in Control, January 2015, Elsevier

    Alexandre Dolgui

91. 
    Assembly line balancing with ergonomics paradigms: two alternative methods

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

92. 
    Cooperative control in production and logistics

    Article • Annual Reviews in Control, January 2015, Elsevier

    Alexandre Dolgui

93. 
    Minimizing the number of workers for one cycle of a paced production line

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

94. 
    Optimizing Series-Parallel Execution of Intersecting Blocks of Operations

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

95. 
    Ripple Effect in the Time-Critical Food Supply Chains and Recovery Policies

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

96. 
    Supply Chain Design With Disruption Considerations: Review of Research Streams on the Ripple Effect in the Supply Chain

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

97. 
    Supply planning for multi-levels assembly system under random lead times

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

98. 
    Variety-oriented design of rotary production systems

    Article • CIRP Annals, January 2015, Elsevier

    Alexandre Dolgui

99. 
    Foreword

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Alexandre Dolgui

100. 
     Cash flow risk in dual-channel supply chain

     Article • International Journal of Production Research, December 2014, Taylor & Francis

     Alexandre Dolgui

101. 
     Integration of aggregate distribution and dynamic transportation planning in a supply chain with capacity disruptions and the ripple effect consideration

     Article • International Journal of Production Research, December 2014, Taylor & Francis

     Alexandre Dolgui

102. 
     A sample average approximation method for disassembly line balancing problem under uncertainty

     Article • Computers & Operations Research, November 2014, Elsevier

     Alexandre Dolgui

103. 
     An exact solution approach for disassembly line balancing problem under uncertainty of the task processing times

     Article • International Journal of Production Research, September 2014, Taylor & Francis

     Alexandre Dolgui

104. 
     Combinatorial techniques to optimally customize an automated production line with rotary transfer and turrets

     Article • IIE Transactions, June 2014, Taylor & Francis

     Alexandre Dolgui

105. 
     A new graphical approach for solving single-machine scheduling problems approximately

     Article • International Journal of Production Research, May 2014, Taylor & Francis

     Prof. Dr. Frank Werner, Alexandre Dolgui

106. 
     Minimizing setup costs in a transfer line design problem with sequential operation processing

     Article • International Journal of Production Economics, May 2014, Elsevier

     Alexandre Dolgui

107. 
     An exact optimization approach for a transfer line reconfiguration problem

     Article • The International Journal of Advanced Manufacturing Technology, February 2014, Springer Science + Business Media

     Alexandre Dolgui

108. 
     A Graphical Approach to Solve an Investment Optimization Problem

     Article • Journal of Mathematical Modelling and Algorithms in Operations Research, February 2014, Springer Science + Business Media

     Prof. Dr. Frank Werner, Alexandre Dolgui

109. 
     Integrated Procurement–Disassembly Problem

     Article • January 2014, Springer Science + Business Media

     Alexandre Dolgui

110. 
     Dealing with uncertainty in disassembly line design

     Article • CIRP Annals, January 2014, Elsevier

     Alexandre Dolgui

111. 
     Disassembly Line Balancing and Sequencing under Uncertainty

     Article • Procedia CIRP, January 2014, Elsevier

     Alexandre Dolgui

112. 
     Lagrangian Relaxation for Stochastic Disassembly Line Balancing Problem

     Article • Procedia CIRP, January 2014, Elsevier

     Alexandre Dolgui

113. 
     Reducing the Research Space of Possible Order Release Dates for Multi-level Assembly Systems under Stochastic Lead Times

     Article • January 2014, Springer Science + Business Media

     Alexandre Dolgui

114. 
     The Ripple effect in supply chains: trade-off ‘efficiency-flexibility-resilience’ in disruption management

     Article • International Journal of Production Research, November 2013, Taylor & Francis

     Alexandre Dolgui

115. 
     In 2012IJPRpublished its 50th volume

     Article • International Journal of Production Research, November 2013, Taylor & Francis

     Alexandre Dolgui

116. 
     A bibliography of non-deterministic lot-sizing models

     Article • International Journal of Production Research, November 2013, Taylor & Francis

     Alexandre Dolgui

117. 
     Outsourcing: definitions and analysis

     Article • International Journal of Production Research, November 2013, Taylor & Francis

     Alexandre Dolgui

118. 
     Genetic algorithm for balancing reconfigurable machining lines

     Article • Computers & Industrial Engineering, November 2013, Elsevier

     Alexandre Dolgui

119. 
     Balancing reconfigurable machining lines via a set partitioning model

     Article • International Journal of Production Research, October 2013, Taylor & Francis

     Alexandre Dolgui

120. 
     Integrated configurable equipment selection and line balancing for mass production with serial–parallel machining systems

     Article • Engineering Optimization, October 2013, Taylor & Francis

     Alexandre Dolgui

121. 
     A decomposition method for stochastic partial disassembly line balancing with profit maximization

     Article • August 2013, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

122. 
     Lot-sizing on a single imperfect machine: ILP models and FPTAS extensions

     Article • Computers & Industrial Engineering, August 2013, Elsevier

     Alexandre Dolgui

123. 
     Two-dedicated-machine scheduling problem with precedence relations to minimize makespan

     Article • Optimization Letters, July 2013, Springer Science + Business Media

     Alexandre Dolgui

124. 
     Multi-stage supply chain scheduling with non-preemptive continuous operations and execution control

     Article • International Journal of Production Research, June 2013, Taylor & Francis

     Alexandre Dolgui

125. 
     Assembly line balancing under uncertainty: Robust optimization models and exact solution method

     Article • Computers & Industrial Engineering, June 2013, Elsevier

     Alexandre Dolgui

126. 
     Optimal MRP parameters for a single item inventory with random replenishment lead time, POQ policy and service level constraint

     Article • International Journal of Production Economics, May 2013, Elsevier

     Alexandre Dolgui

127. 
     A taxonomy of line balancing problems and their solutionapproaches

     Article • International Journal of Production Economics, April 2013, Elsevier

     Alexandre Dolgui

128. 
     Efficiency evaluation model with constraint resource: an application to banking operations

     Article • Journal of the Operational Research Society, February 2013, Nature

     Alexandre Dolgui

129. 
     Stability measure for a generalized assembly line balancing problem

     Article • Discrete Applied Mathematics, February 2013, Elsevier

     Alexandre Dolgui

130. 
     A Graphical Approach for Solving Single Machine Scheduling Problems Approximately

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Prof. Dr. Frank Werner, Alexandre Dolgui

131. 
     A Stochastic Formulation of the Disassembly Line Balancing Problem

     Article • January 2013, Springer Science + Business Media

     Alexandre Dolgui

132. 
     A Transfer Line Design Problem with Setup Times and Costs

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

133. 
     APPLICATION OF CONTROL THEORETIC TOOLS TO SUPPLY CHAIN DISRUPTION MANAGEMENT

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

134. 
     Assembly Line Balancing: Conventional Methods and Extensions

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

135. 
     Integrated Decision Making in Flow Line Balancing

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

136. 
     Integration of additional purchase cost to reduce the lead time uncertainty for one level assembly system

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

137. 
     L-shaped Algorithm for Stochastic Disassembly Line Balancing Problem

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

138. 
     Mathematical Model for Supply Planning of Multi-level Assembly Systems with Stochastic Lead Times

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

139. 
     Multi-disciplinary analysis of interfaces "Supply Chain Event Management - RFID - control theory"

     Article • International Journal of Integrated Supply Management, January 2013, Inderscience Publishers

     Alexandre Dolgui

140. 
     Optimization of Multi-tool Cutting Modes in Multi-item Batch Manufacturing System

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

141. 
     Parallel Machining of Multiple Parts on Rotary Transfer Machines with Turrets

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

142. 
     Stable optimal line balances with a fixed set of the working stations

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

143. 
     Supply planning and inventory control under lead time uncertainty: A review

     Article • IFAC Proceedings Volumes, January 2013, Elsevier

     Alexandre Dolgui

144. 
     Robust balancing of straight assembly lines with interval task times

     Article • Journal of the Operational Research Society, December 2012, Nature

     Alexandre Dolgui

145. 
     A decision support system for design of mass production machining lines composed of stations with rotary or mobile table

     Article • Robotics and Computer-Integrated Manufacturing, December 2012, Elsevier

     Alexandre Dolgui

146. 
     A note on analytic calculation of planned lead times for assembly systems under POQ policy and service level constraint

     Article • International Journal of Production Economics, December 2012, Elsevier

     Alexandre Dolgui

147. 
     Algorithms and implementation of a set partitioning approach for modular machining line design

     Article • Computers & Operations Research, December 2012, Elsevier

     Alexandre Dolgui

148. 
     Multi-product sequencing and lot-sizing under uncertainties: A memetic algorithm

     Article • Engineering Applications of Artificial Intelligence, December 2012, Elsevier

     Alexandre Dolgui

149. 
     Reduction approaches for a generalized line balancing problem

     Article • Computers & Operations Research, October 2012, Elsevier

     Alexandre Dolgui

150. 
     A reactive GRASP and Path Relinking for balancing reconfigurable transfer lines

     Article • International Journal of Production Research, September 2012, Taylor & Francis

     Alexandre Dolgui

151. 
     Balancing of simple assembly lines under variations of task processing times

     Article • Annals of Operations Research, September 2012, Springer Science + Business Media

     Alexandre Dolgui

152. 
     Scenario based robust line balancing: Computational complexity

     Article • Discrete Applied Mathematics, September 2012, Elsevier

     Alexandre Dolgui

153. 
     Complexity of Buffer Capacity Allocation Problems for Production Lines with Unreliable Machines

     Article • Journal of Mathematical Modelling and Algorithms in Operations Research, August 2012, Springer Science + Business Media

     Alexandre Dolgui

154. 
     Equipment Location in Machining Transfer Lines with Multi-spindle Heads

     Article • Journal of Mathematical Modelling and Algorithms in Operations Research, August 2012, Springer Science + Business Media

     Alexandre Dolgui

155. 
     Complex Optimization Problems in Locational Analysis and Scheduling

     Article • Journal of Mathematical Modelling and Algorithms in Operations Research, August 2012, Springer Science + Business Media

     Alexandre Dolgui

156. 
     Guest Editorial Special Section on Radio Frequency Identification

     Article • IEEE Transactions on Industrial Informatics, August 2012, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

157. 
     A branch and bound algorithm for the response time variability problem

     Article • Journal of Scheduling, June 2012, Springer Science + Business Media

     Alexandre Dolgui

158. 
     Single machine scheduling with precedence constraints and positionally dependent processing times

     Article • Computers & Operations Research, June 2012, Elsevier

     Alexandre Dolgui

159. 
     A mathematical model for a reconfiguration problem of transfer machining lines

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

160. 
     An Intelligent PLM System for Machining Environment

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

161. 
     ATTAINABLE SETS AND THEIR POSSIBLE APPLICATIONS TO SUPPLY CHAIN ANALYSIS

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

162. 
     Balancing reconfigurable machining lines by means of set partitioning model

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

163. 
     Intelligent Identification Algorithms for Frequency/Power Control in Smart Grid

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

164. 
     Line configuration to minimize setup costs

     Article • Mathematical and Computer Modelling, May 2012, Elsevier

     Alexandre Dolgui

165. 
     Optimal Design of Rotary Transfer Machines with Turrets

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

166. 
     Optimization of Multi-tool Cutting Modes for Batch Manufacturing in Large Series Machining Environment

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

167. 
     Production Lot Sizes on a Single Imperfect Machine: FPTAS vs ILP models

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

168. 
     Radio Frequency IDentification (RFID) in Supply Chain: Technolog and Concerns

     Article • IFAC Proceedings Volumes, May 2012, Elsevier

     Alexandre Dolgui

169. 
     Min–max and min–max (relative) regret approaches to representatives selection problem

     Article • 4OR, April 2012, Springer Science + Business Media

     Alexandre Dolgui

170. 
     Applicability of optimal control theory to adaptive supply chain planning and scheduling

     Article • Annual Reviews in Control, April 2012, Elsevier

     Alexandre Dolgui

171. 
     Enhanced mixed integer programming model for a transfer line design problem

     Article • Computers & Industrial Engineering, March 2012, Elsevier

     Alexandre Dolgui

172. 
     Optimal design of machines processing pipeline parts

     Article • The International Journal of Advanced Manufacturing Technology, February 2012, Springer Science + Business Media

     Alexandre Dolgui

173. 
     Passing the torch

     Article • International Journal of Production Research, January 2012, Taylor & Francis

     Alexandre Dolgui

174. 
     Combinatorial design of a minimum cost transfer line

     Article • Omega, January 2012, Elsevier

     Alexandre Dolgui

175. 
     Multi-Objective Approach for Production Line Equipment Selection

     Article • Management and Production Engineering Review, January 2012, De Gruyter

     Alexandre Dolgui

176. 
     The complexity of dissociation set problems in graphs

     Article • Discrete Applied Mathematics, August 2011, Elsevier

     Prof. Dr. Frank Werner, Alexandre Dolgui

177. 
     On the complexity of the independent set problem in triangle graphs

     Article • Discrete Mathematics, August 2011, Elsevier

     Alexandre Dolgui

178. 
     Scheduling with due date assignment under special conditions on job processing

     Article • Journal of Scheduling, June 2011, Springer Science + Business Media

     Alexandre Dolgui

179. 
     Optimal time phasing and periodicity for MRP with POQ policy

     Article • International Journal of Production Economics, May 2011, Elsevier

     Alexandre Dolgui

180. 
     Modelling transfer line design problem via a set partitioning problem

     Article • Optimization Letters, April 2011, Springer Science + Business Media

     Alexandre Dolgui

181. 
     Optimal MRP offsetting for assembly systems with stochastic lead times: POQ policy and service level constraint

     Article • Journal of Intelligent Manufacturing, March 2011, Springer Science + Business Media

     Professor Abdulrahman M Al- Ahmari, Alexandre Dolgui

182. 
     A new model for equipment selection and transfer line design problem

     Article • IFAC Proceedings Volumes, January 2011, Elsevier

     Alexandre Dolgui

183. 
     ON APPLICABILITY OF OPTIMAL CONTROL THEORY TO ADAPTIVE SUPPLY CHAIN PLANNING AND SCHEDULING

     Article • IFAC Proceedings Volumes, January 2011, Elsevier

     Alexandre Dolgui

184. 
     Equilibrage de lignes de production

     Article • Journal Européen des Systèmes Automatisés, December 2010, Lavoisier

     Alexandre Dolgui

185. 
     Metaheuristic approaches for the design of machining lines

     Article • The International Journal of Advanced Manufacturing Technology, December 2010, Springer Science + Business Media

     Alexandre Dolgui

186. 
     Multi-objective optimization for inventory control in two-level assembly systems under uncertainty of lead times

     Article • Computers & Operations Research, November 2010, Elsevier

     Alexandre Dolgui

187. 
     Multi-product lot-sizing and sequencing on a single imperfect machine

     Article • Computational Optimization and Applications, October 2010, Springer Science + Business Media

     Alexandre Dolgui

188. 
     Scheduling problems with partially ordered jobs

     Article • Automation and Remote Control, October 2010, Pleiades Publishing Ltd

     Alexandre Dolgui

189. 
     Multi-product lot sizing and scheduling on unrelated parallel machines

     Article • IIE Transactions, April 2010, Taylor & Francis

     Alexandre Dolgui

190. 
     A MIP approach for balancing transfer line with complex industrial constraints

     Article • Computers & Industrial Engineering, April 2010, Elsevier

     Alexandre Dolgui

191. 
     Pricing strategies and models

     Article • Annual Reviews in Control, April 2010, Elsevier

     Alexandre Dolgui

192. 
     Special section: Planning and control of manufacturing and logistic systems

     Article • Annual Reviews in Control, April 2010, Elsevier

     Alexandre Dolgui

193. 
     Supply Chain Engineering

     Article • January 2010, Springer Science + Business Media

     Alexandre Dolgui

194. 
     Balancing lines with CNC machines: A multi-start ant based heuristic

     Article • CIRP Journal of Manufacturing Science and Technology, January 2010, Elsevier

     Alexandre Dolgui

195. 
     Balancing Mass Production Machining Lines with Genetic Algorithms

     Article • January 2010, Springer Science + Business Media

     Alexandre Dolgui

196. 
     MRP Offsetting for Assembly Systems with Random Component Delivery Times: A Particular Case

     Article • January 2010, Springer Science + Business Media

     Alexandre Dolgui

197. 
     Post-optimal analysis for a design problem of machining lines

     Article • IFAC Proceedings Volumes, January 2010, Elsevier

     Alexandre Dolgui

198. 
     Calculating safety stocks for assembly systems with random component procurement lead times: A branch and bound algorithm

     Article • European Journal of Operational Research, December 2009, Elsevier

     Alexandre Dolgui

199. 
     Manipulator motion planning for high-speed robotic laser cutting

     Article • International Journal of Production Research, October 2009, Taylor & Francis

     Alexandre Dolgui

200. 
     Branch and bound algorithm for a transfer line design problem: Stations with sequentially activated multi-spindle heads

     Article • European Journal of Operational Research, September 2009, Elsevier

     Alexandre Dolgui

201. 
     Genetic algorithm for supply planning in two-level assembly systems with random lead times

     Article • Engineering Applications of Artificial Intelligence, September 2009, Elsevier

     Alexandre Dolgui

202. 
     Qualitative stability analysis of an optimal balance for an assembly line with fixed stations number

     Article • September 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

203. 
     A continuous model for supply planning of assembly systems with stochastic component procurement times

     Article • International Journal of Production Economics, August 2009, Elsevier

     Alexandre Dolgui

204. 
     Comparison of exact and heuristic methods for a transfer line balancing problem

     Article • International Journal of Production Economics, August 2009, Elsevier

     Alexandre Dolgui

205. 
     Introduction to design and analysis of production systems

     Article • International Journal of Production Economics, August 2009, Elsevier

     Alexandre Dolgui

206. 
     Configuration des lignes d'usinage à boîtiers multibroches : une approche mixte

     Article • RAIRO - Operations Research, July 2009, EDP Sciences

     Alexandre Dolgui

207. 
     Optimisation of Machining Lines Composed of Unit-Built Machines

     Article • June 2009, Elsevier

     Alexandre Dolgui

208. 
     Genetic algorithms for a supply management problem: MIP-recombination vs greedy decoder

     Article • European Journal of Operational Research, June 2009, Elsevier

     Alexandre Dolgui

209. 
     Minimizing makespan for multi-spindle head machines with a mobile table

     Article • Computers & Operations Research, February 2009, Elsevier

     Alexandre Dolgui

210. 
     Cutting edge of the French production research community

     Article • International Journal of Production Research, January 2009, Taylor & Francis

     Alexandre Dolgui

211. 
     Graph approach for optimal design of transfer machine with rotary table

     Article • International Journal of Production Research, January 2009, Taylor & Francis

     Alexandre Dolgui

212. 
     Some new results on the analysis and simulation of bucket brigades (self-balancing production lines)

     Article • International Journal of Production Research, January 2009, Taylor & Francis

     Alexandre Dolgui

213. 
     On the Complexity of Dissociation Set Problems in Graphs

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Prof. Dr. Frank Werner, Alexandre Dolgui

214. 
     A GRASP heuristic for Sequence-Dependent Transfer Line Balancing Problem

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

215. 
     An approach to transfer line balancing via a special set partitioning problem

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

216. 
     Balancing modular transfer lines with serial–parallel activation of spindle heads at stations

     Article • Discrete Applied Mathematics, January 2009, Elsevier

     Alexandre Dolgui

217. 
     Due Date Assignment and Scheduling under Special Conditions on Job Processing

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

218. 
     Generalized Newsboy model for MRP parameterization under uncertainties

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

219. 
     Multi-product lot-sizing and scheduling on unrelated parallel machines to minimize makespan

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

220. 
     Optimisation of Machining Lines Composed of Unit-built Machines

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

221. 
     Stochastic Dynamic Pricing Models of Monopoly Systems

     Article • IFAC Proceedings Volumes, January 2009, Elsevier

     Alexandre Dolgui

222. 
     Optimal supply planning in MRP environments for assembly systems with random component procurement times

     Article • International Journal of Production Research, October 2008, Taylor & Francis

     Alexandre Dolgui

223. 
     A heuristic multi-start decomposition approach for optimal design of serial machining lines

     Article • European Journal of Operational Research, September 2008, Elsevier

     Alexandre Dolgui

224. 
     Control of chaos in agent based manufacturing systems

     Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

225. 
     Planned lead times for one-level assembly system with service level constraint

     Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

226. 
     Supply planning for single-level assembly system with stochastic component delivery times and service-level constraint

     Article • International Journal of Production Economics, September 2008, Elsevier

     Alexandre Dolgui

227. 
     Extended beta-binomial model for demand forecasting of multiple slow-moving inventory items

     Article • International Journal of Systems Science, July 2008, Taylor & Francis

     Alexandre Dolgui

228. 
     A random search and backtracking procedure for transfer line balancing

     Article • International Journal of Computer Integrated Manufacturing, June 2008, Taylor & Francis

     Alexandre Dolgui

229. 
     Planned lead time optimization in material requirement planning environment for multilevel production systems

     Article • Journal of Systems Science and Systems Engineering, June 2008, Springer Science + Business Media

     Alexandre Dolgui

230. 
     Exact and heuristic algorithms for balancing transfer lines when a set of available spindle heads is given

     Article • International Transactions in Operational Research, May 2008, Wiley

     Alexandre Dolgui

231. 
     Demand forecasting for multiple slow-moving items with short requests history and unequal demand variance

     Article • International Journal of Production Economics, April 2008, Elsevier

     Alexandre Dolgui

232. 
     A stochastic model for operating room planning with elective and emergency demand for surgery

     Article • European Journal of Operational Research, March 2008, Elsevier

     Alexandre Dolgui

233. 
     On the performance of binomial and beta-binomial models of demand forecasting for multiple slow-moving inventory items

     Article • Computers & Operations Research, March 2008, Elsevier

     Alexandre Dolgui

234. 
     Optimisation of multi-position machines and transfer lines

     Article • European Journal of Operational Research, March 2008, Elsevier

     Alexandre Dolgui

235. 
     Emergent Chaotic Behaviour in Agent Based Manufacturing Systems

     Article • January 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

236. 
     Forecasting risk analysis for supply chains with intermittent demand

     Article • International Journal of Risk Assessment and Management, January 2008, Inderscience Publishers

     Alexandre Dolgui

237. 
     Lot-Sizing and Sequencing on a Single Imperfect Machine

     Article • January 2008, Springer Science + Business Media

     Alexandre Dolgui

238. 
     Editorial

     Article • Journal of Decision System, January 2008, Taylor & Francis

     Alexandre Dolgui

239. 
     Partie II. Une approche multicritère

     Article • Journal of Decision System, January 2008, Taylor & Francis

     Alexandre Dolgui

240. 
     Partie I. Cas monocritère

     Article • Journal of Decision System, January 2008, Taylor & Francis

     Alexandre Dolgui

241. 
     An evaluation of constructive heuristic methods for solving the alternative subgraphs assembly line balancing problem

     Article • Journal of Heuristics, October 2007, Springer Science + Business Media

     Alexandre Dolgui

242. 
     HBBA: hybrid algorithm for buffer allocation in tandem production lines

     Article • Journal of Intelligent Manufacturing, July 2007, Springer Science + Business Media

     Alexandre Dolgui

243. 
     Une généralisation du Modèle Normatif des lignes auto-équilibrées (« bucket brigades »)

     Article • Journal Européen des Systèmes Automatisés, June 2007, Lavoisier

     Alexandre Dolgui

244. 
     Optimization of power transmission systems using a multi-level decomposition approach

     Article • RAIRO - Operations Research, April 2007, EDP Sciences

     Alexandre Dolgui

245. 
     Efficiently solvable cases of quadratic assignment problem with generalized monotonic and incomplete anti-monge matrices

     Article • Cybernetics and Systems Analysis, January 2007, Springer Science + Business Media

     Alexandre Dolgui

246. 
     Special section: Advances in manufacturing systems and logistics

     Article • Annual Reviews in Control, January 2007, Elsevier

     Alexandre Dolgui

247. 
     Supply planning under uncertainties in MRP environments: A state of the art

     Article • Annual Reviews in Control, January 2007, Elsevier

     Alexandre Dolgui

248. 
     Integer programming models for logical layout design of modular machining lines

     Article • Computers & Industrial Engineering, November 2006, Elsevier

     Alexandre Dolgui

249. 
     Supply Planning in Multilevel Assembly Systems Under Lead Times uncertainties

     Article • October 2006, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

250. 
     MIP approach to balancing transfer lines with blocks of parallel operations

     Article • IIE Transactions, October 2006, Taylor & Francis

     Alexandre Dolgui

251. 
     Balancing large-scale machining lines with multi-spindle heads using decomposition

     Article • International Journal of Production Research, September 2006, Taylor & Francis

     Alexandre Dolgui

252. 
     A Supply Planning Model for Multilevel Assembly Systems Under Random Lead Times

     Article • September 2006, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

253. 
     A Decomposition Method for Transfer Line Life Cycle Cost Optimisation

     Article • Journal of Mathematical Modelling and Algorithms, February 2006, Springer Science + Business Media

     Alexandre Dolgui

254. 
     Guest Editorial

     Article • Journal of Mathematical Modelling and Algorithms, February 2006, Springer Science + Business Media

     Alexandre Dolgui

255. 
     Cluster-level operations planning for the out-of-position robotic arc-welding

     Article • International Journal of Production Research, February 2006, Taylor & Francis

     Alexandre Dolgui

256. 
     A special case of transfer lines balancing by graph approach

     Article • European Journal of Operational Research, February 2006, Elsevier

     Alexandre Dolgui

257. 
     Balancing Assembly and Transfer Lines

     Article • European Journal of Operational Research, February 2006, Elsevier

     Alexandre Dolgui

258. 
     Stability analysis of an optimal balance for an assembly line with fixed cycle time

     Article • European Journal of Operational Research, February 2006, Elsevier

     Alexandre Dolgui

259. 
     Heuristic Methods to Solve the Alternative Subgraphs Assembly Line Balancing Problem

     Article • January 2006, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

260. 
     Preface

     Article • January 2006, Elsevier

     Alexandre Dolgui

261. 
     Decomposition approach for a problem of lot-sizing and sequencing under uncertainties

     Article • International Journal of Computer Integrated Manufacturing, July 2005, Taylor & Francis

     Alexandre Dolgui

262. 
     A heuristic approach for transfer lines balancing

     Article • Journal of Intelligent Manufacturing, April 2005, Springer Science + Business Media

     Alexandre Dolgui

263. 
     A survey of the self-balancing production lines (?bucket brigades?)

     Article • Journal of Intelligent Manufacturing, April 2005, Springer Science + Business Media

     Alexandre Dolgui

264. 
     Editorial

     Article • Journal of Intelligent Manufacturing, April 2005, Springer Science + Business Media

     Alexandre Dolgui

265. 
     Manufacturing process planning for robotic arc-welding station with positioning table

     Article • January 2005, Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

266. 
     Conception de systèmes de fabrication : prototype d'un logiciel d'aide à la décision

     Article • Journal of Decision System, January 2005, Taylor & Francis

     Alexandre Dolgui

267. 
     Editorial

     Article • Journal of Decision System, January 2005, Taylor & Francis

     Alexandre Dolgui

268. 
     The MPS parameterization under lead time uncertainty

     Article • International Journal of Production Economics, August 2004, Elsevier

     Alexandre Dolgui

269. 
     Multiobjective optimization of robot motion for laser cutting applications

     Article • International Journal of Computer Integrated Manufacturing, March 2004, Taylor & Francis

     Alexandre Dolgui

270. 
     Kinematic aspects of a robot-positioner system in an arc welding application

     Article • Control Engineering Practice, June 2003, Elsevier

     Alexandre Dolgui

271. 
     Une heuristique d'optimisation globale basée sur laΨ-transformation

     Article • RAIRO - Operations Research, April 2003, EDP Sciences

     Alexandre Dolgui

272. 
     A model for supply planning under lead time uncertainty

     Article • International Journal of Production Economics, July 2002, Elsevier

     Alexandre Dolgui

273. 
     Article • Journal of Mathematical Modelling and Algorithms, January 2002, Springer Science + Business Media

     Alexandre Dolgui

274. 
     Generalized newsboy model to compute the optimal planned lead times in assembly systems

     Article • International Journal of Production Research, January 2002, Taylor & Francis

     Alexandre Dolgui

275. 
     Guest Editorial: Modelling, planning and scheduling of manufacturing systems

     Article • International Journal of Production Research, January 2002, Taylor & Francis

     Alexandre Dolgui

276. 
     State of art of optimization methods for assembly line design

     Article • Annual Reviews in Control, January 2002, Elsevier

     Alexandre Dolgui

277. 
     Article • Journal of Intelligent Manufacturing, January 2001, Springer Science + Business Media

     Alexandre Dolgui

278. 
     Planification de systèmes d'assemblage avec approvisionnements aléatoires en composants

     Article • Journal of Decision System, January 1995, Taylor & Francis

     Alexandre Dolgui

279. 
     A combined heuristic approach for optimization of a class of machining lines

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

280. 
     Organization of the modeling and simulation of the discrete processes

     Article • Springer Science + Business Media

     Alexandre Dolgui

281. 
     Balancing production lines composed by series of workstations with parallel operations blocks

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

282. 
     Minimisation of equipment cost for transfer lines with blocks of parallel tasks

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

283. 
     Computer-aided programming of robotic manufacturing cells for laser cutting applications

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui

284. 
     Stability radius of the optimal assembly line balance with fixed cycle time

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Alexandre Dolgui