All Stories

  1. Deposition of a polymer thin film on a silver surface for surface plasmon sensing
  2. Low-Temperature Plasma Pretreatment Enhanced Cholesterol Detection in Brain by Desorption Electrospray Ionization-Mass Spectrometry Imaging
  3. Design and Characterization of an Upscaled Dielectric Barrier Discharge-Based Ten-Layer Plasma Source for High-Flow-Rate Gas Treatment
  4. Effects of Thermal Boundary Resistance on Thermal Management of Gallium-Nitride-Based Semiconductor Devices: A Review
  5. The Degradation of Antibiotics by Reactive Species Generated from Multi-Gas Plasma Jet Irradiation
  6. Characteristics of Double-Layer, Large-Flow Dielectric Barrier Discharge Plasma Source for Toluene Decomposition
  7. Genome editing by introduction of Cas9/sgRNA into plant cells using temperature-controlled atmospheric pressure plasma
  8. Evaluation of cold atmospheric pressure plasma irradiation of water as a method of singlet oxygen generation
  9. Development of Ultrasonic Pulsed Plasma Jet Source for Remote Surface Treatment
  10. Pre- and Post-Harvest Conditions Affect Polyphenol Content in Strawberry (Fragaria × ananassa)
  11. Decomposition of Large Flow Toluene Using Multilayer Dielectric Barrier Discharge
  12. Ultrasonic-Combined Plasma Bubbling for Adherent Bacteria Disinfection on Medical Equipment
  13. Resin Cement–Zirconia Bond Strengthening by Exposure to Low-Temperature Atmospheric Pressure Multi-Gas Plasma
  14. Temperature-controlled atmospheric-pressure plasma treatment induces protein uptake via clathrin-mediated endocytosis in tobacco cells
  15. Influence of Controlling Plasma Gas Species and Temperature on Reactive Species and Bactericidal Effect of the Plasma
  16. Plasma Gas Temperature Control Performance of Metal 3D-Printed Multi-Gas Temperature-Controllable Plasma Jet
  17. Atmospheric Pressure Tornado Plasma Jet of Polydopamine Coating on Graphite Felt for Improving Electrochemical Performance in Vanadium Redox Flow Batteries
  18. Development of an Analytical Method for Sulfur in Hydrogen Gas Using Helium-atmospheric Pressure Pulse Microplasma
  19. Tailoring surface properties of polyethylene terephthalate by atmospheric pressure plasma jet for grafting biomaterials
  20. Development of a High-Efficiency Decomposition Technology for Volatile Chemical Warfare Agent Sarin Using Dielectric Barrier Discharge
  21. DNA Damage Response After Ionizing Radiation Exposure in Skin Keratinocytes Derived from Human-Induced Pluripotent Stem Cells
  22. Study on effect of introduced gas bubbles for the low channel damage in direct and alternating current liquid electrode plasma atomic emission spectrometry
  23. Endoscopic Hemostasis in Porcine Gastrointestinal Tract Using CO2 Low-Temperature Plasma Jet
  24. Development of an ionization method using hydrogenated plasma for mass analysis of surface adhesive compounds
  25. Influence of Gas Temperature in Atmospheric Non-Equilibrium Plasma on Bactericidal Effect
  26. Effect of Atmospheric Low Temperature Plasma Treatment on Fracture Strength of Adhesively Bonded Joints of Fiber reinforced polypropylene
  27. プラズマ照射で植物細胞にタンパク質を導入
  28. Investigation of blood coagulation effect of nonthermal multigas plasma jet in vitro and in vivo
  29. 3D Printed Mini Plasma Jet: Application To Hemostatic Treatment For Endoscope
  30. Direct protein introduction into plant cells using a multi-gas plasma jet
  31. Development of a High-Density Microplasma Emission Source for a Micro Total Analysis System
  32. Development of a Dual Plasma Desorption/Ionization System for the Noncontact and Highly Sensitive Analysis of Surface Adhesive Compounds
  33. Plasma Spectroscopy - Principles and Applications
  34. Microplasma Atomic Emission Spectroscopy
  35. Imaging of the Staphylococcus aureus Inactivation Process Induced by a Multigas Plasma Jet
  36. Development of AC-driven liquid electrode plasma for sensitive detection of metals
  37. Current Progress in Advanced Research into Tetrodotoxin Inactivation by Gas Plasmas
  38. Irradiation effects of low temperature multi gas plasma jet on oral bacteria
  39. Correction: Microbial Inactivation in the Liquid Phase Induced by Multigas Plasma Jet
  40. Microbial Inactivation in the Liquid Phase Induced by Multigas Plasma Jet
  41. Atmospheric nonequilibrium mini-plasma jet created by a 3D printer
  42. Development of a Gas-Cylinder-Free Plasma Desorption/Ionization System for On-Site Detection of Chemical Warfare Agents
  43. Temperature Controllable Atmospheric Plasma Source
  44. Measurement of sterilization ability and reactive species of various gas plasma bubbled-up water
  45. Investigation of bacterial inactivation by various gas plasmas and electron microscopic observation of treated bacteria
  46. A transient signal acquisition and processing method for micro-droplet injection system inductively coupled plasma mass spectrometry (M-DIS-ICP-MS)
  47. Evaluation of the analytical performances of a valve-based droplet direct injection system by inductively coupled plasma-atomic emission spectrometry
  48. Development of Desolvation System for Single-cell Analysis Using Droplet Injection Inductively Coupled Plasma Atomic Emission Spectroscopy
  49. Ultra Sensitive Analysis using Atmospheric Plasmas
  50. A pulse-synchronized microplasma atomic emission spectroscopy system for ultrasmall sample analysis
  51. Fundamental properties of a touchable high-power pulsed microplasma jet and its application as a desorption/ionization source for ambient mass spectrometry
  52. Settlement of Planulae of the Moon Jellyfish Aurelia aurita onto Hydrophilic Polycarbonate Plates Modified by Atmospheric Plasma Treatment
  53. Development and fundamental investigation of He plasma ionization detector (HPID) for gas chromatography using DC glow discharge
  54. Fundamental properties of a non-destructive atmospheric-pressure plasma jet in argon or helium and its first application as an ambient desorption/ionization source for high-resolution mass spectrometry
  55. A New Air-cooled Argon/Helium-compatible Inductively Coupled Plasma Torch
  56. Decomposition of tetrodotoxin using multi-gas plasma jet
  57. Effects of Droplet Introduction into the ICP Sustained by Free-running RF-generator on Plasma Spectroscopic Characteristics
  58. ICP Generation and Evaluation of Oscillation Frequency Shift Using Free-running RF-generator for Droplet Sample Introduction
  59. Investigation of reactive species using various gas plasmas
  60. Simulation and mitigation of the magneto-Rayleigh-Taylor instabilities in Z-pinch gas discharge extreme ultraviolet plasma radiation sources
  61. Development of Injection Gas Heating System for Introducing Large Droplets to Inductively Coupled Plasma
  62. Development of the Atmospheric Plasma Soft-Ablation Method (APSA) for Elemental Analysis of Materials on Heat-sensitive Substrates
  63. Surface Hydrophilization of Polyimide Films Using Atmospheric Damage-Free Multigas Plasma Jet Source
  64. Hydrophilization of Polyimide Film using Damage-Free Multi-Gas Plasma Jet
  65. Sample introduction of single selenized yeast cells (Saccharomyces cerevisiae) by micro droplet generation into an ICP-sector field mass spectrometer for label-free detection of trace elements
  66. Application of a micro-droplet generator for an ICP-sector field mass spectrometer – optimization and analytical characterization
  67. Wide-Bore Capillary Hydrodynamic Chromatography with ICP-MS Detection for Evaluation of Lanthanide Uptake by Molecular Aggregates
  68. Bacterial Inactivation in Liquids Using Multi-Gas Plasmas
  69. Spectroscopic Characteristics of Air Inductively Coupled Plasma by Nitrous Monoxide Gas Additive
  70. Estimation of electron temperature and density of the decay plasma in a laser-assisted discharge plasma extreme ultraviolet source by using a modified Stark broadening method
  71. Pinch dynamics of the 13.5 nm EUV-emitting plasma in a LA-DPP source
  72. Direct Decomposition of Anesthetic Gas Exhaust Using Atmospheric Pressure Multigas Inductively Coupled Plasma
  73. Comparison of hydrophilization effect by various gas atmospheric plasma
  74. Sterilization effect of various gas non-thermal plasma
  75. Investigation of the dynamics of theZ-pinch imploding plasma for a laser-assisted discharge-produced Sn plasma EUV source
  76. Measurements of plasma parameters in atmospheric helium plasma detectors for gas chromatograph
  77. Development of 335 mm linear-type atmospheric plasma source for surface treatment
  78. Structure and Expansion Characteristics of Laser Ablation Tin Plasma into a Vacuum
  79. Development of New Sample Introduction System and Excitation/Ionization Source for Nano-Litter Samples
  80. Direct Decomposition of Anesthetic Gas by Atmospheric Multi-Gas Inductively Coupled Plasma Source
  81. Trace Elemental Analysis Technologies using Atmospheric Plasma Sources
  82. Evaluation of DC Biased RF / Pulsed Atmospheric Microplasma Source for Trace Elemental Analysis
  83. Effects of Cusp Magnetic Field in Cylindrical Radially Convergent Beam Fusion Device
  84. Development of secondary electron emission gun for VOC's treatment
  85. Hydrophilization treatment of copper surface usingan atmospheric damage-free plasma source
  86. Behavior of laser assisted tin discharge EUV emitting plasma
  87. Excitation/ionization process of aqueous solutions in high-power pulsed microplasma
  88. Atmospheric Large Sized Remote Plasma Source for Surface Treatment
  89. Experimental study of xenon and tin discharge produced plasma EUV light source
  90. Direct decomposition of anesthetic gas by atmospheric multi-gas inductively coupled plasma
  91. Development of Xe and Sn discharge EUV light source
  92. Measurement of Divergence of Ne-Like Ar Soft X-ray Laser Generated by Capillary Z-Pinch Discharge
  93. Atmospheric Line Plasma Source using Asymmetric Barrier Discharge
  94. Development of High Power Pulse Micro-Plasma Source
  95. Optical Observation of Gas Jet Z-pinch Discharge Produced Extreme Ultraviolet Light Source
  96. High Voltage Capillary Discharge System for Excitation of Soft X-ray Laser
  97. Characteristics of Secondary Emission Electron Gun and its Application to Decomposition of VOCs
  98. High voltage capillary discharge system for excitation of soft X-ray laser
  99. Low Pressure Operation of Radially Convergent Beam Fusion Using Differentially-Pumped Ion Sources
  100. Optical observation of gas jet z-pinch discharge produced extreme ultraviolet light source
  101. Soft X-ray Radiation from Nitrogen Z-pinch Plasma Produced by Capillary Discharge
  102. Plasma and Spectroscopic Analysis VI. New Plasma Sources for Spectroscopic Analysis
  103. Nanofractal structure consisting of nanoparticles produced by ultrashort laser pulses
  104. Inactivation of Cells and Spores ofBacillus subtilisUsing Low Energy Pulsed Electron Beam
  105. Influence of electrode separation and gas curtain on extreme ultraviolet emission of a gas jet z-pinch source
  106. A comparative study on the performance of a xenon capillaryZ-pinch EUV lithography light source using a pinhole camera
  107. Performance of gas jet type Z-pinch plasma light source for EUV lithography
  108. Miniature hybrid plasma focus extreme ultraviolet source driven by 10kA fast current pulse
  109. Optimization of a gas jet-type Z-pinch discharge EUV light source
  110. Application of low-energy secondary emission electron gun for VOC treatment
  111. Soft X-ray radiation from nitrogen filled capillary z-pinch plasma
  112. Preliminary Study of Beam-Beam Reactions in IEC Fusion Device
  113. Performance of Neutron/Proton Source Based on Ion-Source-Assisted Cylindrical Radially Convergent Beam Fusion
  114. Development of Microplasma Source for Trace Elemental Analysis and Its Application to AES Measurement of Halogen
  115. Output Characteristics of Soft X-ray Laser Pumped by Capillary Discharge
  116. Extreme Ultraviolet Light Emission from Z-Pinch Discharge Plasma Source
  117. Output and Optical Performances of Ne-like Ar Capillary Discharge Soft X-ray Laser
  118. Characteristics of Xenon Capillary Z-Pinch Extreme Ultraviolet Lithography Source Driven by DifferentdI/dtDischarge Current Pulses
  119. Experimental Investigation of Effect of Low-Energy Pulsed Atmospheric Electron Beam on Bacterial Cells
  120. High Quality EUV Emission from Discharge Produced Plasma Source
  121. Direct Injection Multi-Gas Inductively Coupled Plasma Source for Industrial Applications
  122. Performance of Neutron/Proton Source Based on Ion-Source-Assisted Radially Convergent Beam Fusion
  123. Development of gas jet type Z-pinch EUV light source for lithography
  124. Pulsed Operation of a Compact Fusion Neutron Source Using a High-Voltage Pulse Generator Developed for Landmine Detection
  125. Research and Development of Landmine Detection System by a Compact Fusion Neutron Source
  126. Development of a Gas Jet-Type Z-Pinch EUV Light Source for Next-Generation Lithography
  127. On the time of lasing onset and the end-effect of a soft x-ray laser device using a capillary z-pinch discharge
  128. On the Amplification Capability of Ne-like Ar Soft X-ray Laser Generated by Capillary Z-Pinch Discharge
  129. Bacterial Inactivation Using Low-Energy Pulsed-Electron Beam
  130. NO<tex>$_x$</tex>Treatment Using Low-Energy Secondary Emission Electron Gun
  131. Focusing of Soft X-ray using a Grazing Incidence Mirror
  132. Evaluation of cooling gas for argon/helium compatible ICP
  133. Development of a clinical jaw movement training robot for intermaxillary traction therapy
  134. Development of capillary z-pinch discharge EUV light source
  135. Performances of Ne-like Ar Soft X-ray Laser using Capillary Z-Pinch Discharge
  136. Analysis of electromagnetic oscillations in dielectric cathode with grid electrodes
  137. Characteristics of an ion induced secondary emission electron gun
  138. Development and characterization of a low current capillary discharge for X-ray laser studies
  139. Generation and characteristics of a pulse-modulated helium inductively coupled plasma.
  140. Improved spectroscopic characteristics of helium inductively coupled plasma by hydrogen additive.
  141. Design and evaluation of dual inlet ICP torch for low gas consumption
  142. Patient Simulator for Mouth Opening and Closing Training
  143. Emittance Measurement of Axisymmetric High-Current Electron Beam Confined by a Longitudinal Magnetic Field
  144. Dynamics of exhaust gas generated by arc extinction
  145. Observation of multi-pulse soft x-ray lasing in a fast capillary discharge
  146. Neutron Production Characteristics and Emission Properties of Spherically Convergent Beam Fusion
  147. Side-Extraction-Type Secondary Emission Electron Gun Using Wire Ion Plasma Source
  148. Neutron production rate and plasma characteristics of spherically convergent beam fusion
  149. Observation of weakly ionized dusty plasma in exhaust gas in a compact-size SF/sub 6/ gas circuit breaker
  150. Measurements of plasma properties in an interface for helium ICP-MS using a Langmuir probe.
  151. Formation and fundamental characteristics of novel free-running helium inductively coupled plasmas
  152. Performance of pulsed power generator using high-voltage static induction thyristor
  153. Reverse switching dynistor pulsers
  154. Neutron Production Rate and Plasma Characteristics of Spherically Convergent Beam Fusion
  155. High-repetition-rate operation of the wire ion plasma source using a novel method
  156. Development of helium ICP-MS using an enhanced vortex flow torch.
  157. Diagnostical measurements of spectroscopic characteristics in a helium ICP using an enhanced vortex flow torch.
  158. Enhanced vortex flow torch for a helium ICP.
  159. Diagnostical Measurements of an Ar-MIP with an Axially-Varied Bore Discharge Tube.
  160. Analysis of an MIP Cavity with an Axially-Varied Bore Discharge Tube.
  161. Poloidal current drive by rotating magnetic field
  162. Behavior of ablated plasma in laser-triggered vacuum switch
  163. Emittance measurement of space charge dominated electron beam confined by a longitudinal magnetic field
  164. High rep-rate operation of pulsed power modulator using high voltage static induction thyristors
  165. Bidirectional pulse generator system for linear induction accelerator