All Stories

  1. Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)-multiwalled carbon nanotube nanocomposites

    Article • Journal of Applied Polymer Science, August 2016, Wiley

    Dr Agus Arsad

  2. ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY FOR PALM COOKING OIL DISCRIMINATOR USING PLANAR ELECTROMAGNETIC SENSOR ARRAY

    Article • Jurnal Teknologi (Sciences & Engineering), July 2016, Penerbit UTM Press

    Dr Agus Arsad

  3. Effect of MMT concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites

    Article • January 2016, De Gruyter

    Dr Agus Arsad

  4. Influence of MMT as reinforcement on rheological behavior, mechanical and morphological properties of recycled PET/ABS thermoplastic nanocomposites

    Article • January 2016, De Gruyter

    Dr Agus Arsad

  5. Solubility assessment of castor (Ricinus communis L) oil in supercritical CO2 at different temperatures and pressures under dynamic conditions

    Article • Industrial Crops and Products, December 2015, Elsevier

    Dr Agus Arsad

  6. Effect of polypropylene, ethylene vinyl acetate and polyamide-6 on properties of recycled polypropylene/empty fruit bunch composites

    Article • Fibers and Polymers, November 2015, Springer Science + Business Media

    Dr Agus Arsad

  7. Detecting mechanism of planar electromagnetic sensor in cooking oil discrimination

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Agus Arsad

  8. Morphological, Thermal and Mechanical Properties of Green Composite Based on Recycled Polyethylene/Polyamide-6/Kenaf Composites

    Article • October 2015, Taylor & Francis

    Dr Agus Arsad

  9. Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Dr Agus Arsad

  10. Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid)

    Article • Advanced Materials Research, October 2015, Trans Tech Publications

    Dr Agus Arsad

  11. A parametric investigation of castor oil (Ricinus comminis L) extraction using supercritical carbon dioxide via response surface optimization

    Article • Journal of the Taiwan Institute of Chemical Engineers, August 2015, Elsevier

    Dr Agus Arsad

  12. Tensile and Flexural Properties of Montmorillonite Nanoclay Reinforced Epoxy Resin Composites

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Agus Arsad, Dr Zyad Salem Othman, Siti noor hidayah Mustapha, Dr Abdul razak Rahmat

  13. Mechanical

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Zyad Salem Othman, Siti noor hidayah Mustapha, Dr Abdul razak Rahmat, Dr Agus Arsad

  14. Characterization and Mechanical Properties of Epoxidized Palm Oil/Epoxy Resin Blend

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Agus Arsad, Dr Zyad Salem Othman, Dr Abdul razak Rahmat

  15. Synthesis and Characterization of Cassava Starch Nanocrystals by Hydrolysis Method

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Dr Abdul razak Rahmat, Dr Agus Arsad

  16. Effects of Compatibilizer on Thermal and Mechanical Properties of PLA/NR Blends

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Dr Abdul razak Rahmat, Dr Agus Arsad

  17. Characterization and process optimization of castor oil (Ricinus communis L.) extracted by the soxhlet method using polar and non-polar solvents

    Article • Journal of the Taiwan Institute of Chemical Engineers, February 2015, Elsevier

    Dr Agus Arsad

  18. Effect of Graphene Loading on Mechanical and Morphological Properties of Recycled Polypropylene/Polyaniline Nanocomposites

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Dr Agus Arsad

  19. Solvent Extraction of Castor Beans Oil: Experimental Optimization via Response Surface Methodology

    Article • January 2015, Springer Science + Business Media

    Dr Agus Arsad

  20. Enhanced dispersion of carbon nanotubes in high density polyethylene matrix using secondary nanofiller and compatibilizer

    Article • Fibers and Polymers, January 2015, Springer Science + Business Media

    Dr Agus Arsad

  21. Synthesis of Nano-Polyaniline Using Different Ultrasonic Wave

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Agus Arsad

  22. Effect of Carbon Nanotube on the Mechanical Properties of Compatibilized Polylactic Acid/Natural Rubber Blend

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Abdul razak Rahmat, Dr Agus Arsad

  23. Mechanical Properties of Epoxidized Palm Oil/Epoxy Resin Blend

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Agus Arsad, Dr Zyad Salem Othman, Dr Abdul razak Rahmat

  24. Influence of Different Ultrasonic Wave on Polymerization of Polyaniline Nanofiber

    Article • Applied Mechanics and Materials, August 2014, Trans Tech Publications

    Dr Agus Arsad

  25. Synthesis of a Compatibilizer and the Effects of Monomer Concentrations

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Agus Arsad

  26. Influence of Compatibilizer on Mechanical Properties of Polylactic Acid/Natural Rubber Blends

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Agus Arsad

  27. Coagulation-Flocculation in Water Treatment using Calotropis Procera Leaves: A case study of River in Kaduna, Nigeria

    Article • Jurnal Teknologi (Sciences & Engineering), March 2014, Penerbit UTM Press

    Dr Agus Arsad

  28. Bio-based thermoset nanocomposite derived from vegetable oil: a short review

    Article • Reviews in Chemical Engineering, January 2014, De Gruyter

    Dr Agus Arsad

  29. A comparative study of various oil extraction techniques from plants

    Article • Reviews in Chemical Engineering, January 2014, De Gruyter

    Dr Agus Arsad

  30. Enhanced mechanical and thermal properties of CNT/HDPE nanocomposite using MMT as secondary filler

    Article • January 2014, American Institute of Physics

    Dr Agus Arsad, Dr Mohammad Jawaid

  31. The influence of kenaf fiber as reinforcement on recycled polypropylene/recycled polyamide-6 composites

    Article • International Journal of Plastics Technology, October 2013, Springer Science + Business Media

    Dr Agus Arsad

  32. The Effect of Natural Rubber Toughening on Mechanical Properties of Poly(lactic Acid)/Multiwalled Carbon Nanotube Nanocomposite

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Dr Agus Arsad

  33. Flow Characteristics and Dynamic Behavior of Polyamide 6/Acrylonitile Butadiene Styrene (PA6/ABS) Blends

    Article • International Journal of Polymeric Materials, January 2013, Taylor & Francis

    Dr Agus Arsad

  34. Effect of MMT concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites

    Article • Journal of Polymer Engineering, January 2013, De Gruyter

    Dr Agus Arsad

  35. Influence of MMT as reinforcement on rheological behavior, mechanical and morphological properties of recycled PET/ABS thermoplastic nanocomposites

    Article • Journal of Polymer Engineering, January 2012, De Gruyter

    Dr Agus Arsad

  36. Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties

    Article • Journal of Polymer Engineering, January 2012, De Gruyter

    Dr Agus Arsad

  37. Mechanical and Rheological Characterization of PA6 and ABS Blends-With and Without Short Glass Fiber

    Article • Journal of Applied Sciences, December 2011, Science Alert

    Dr Agus Arsad