All Stories

  1. Impact of freeze drying on the properties of palmitic acid extracted from Plantain stalk waste
  2. Improving biochar properties through liquid-phase exfoliation of onion peel biochar doped with chicken feathers
  3. Impact of carbonization reactor compartment size on groundnut (Arachis hypogaea) shell biochar properties
  4. Development of green polystyrene composites using Citrus sinensis biochar filler
  5. Investigating the properties and agronomic benefits of onion peel and chicken feather-derived biochars
  6. Expanded Polyethylene Circularity Potentials: A Comprehensive Overview of Production Process, Applications, and Recycling Techniques
  7. Influence of varying aluminum-based combustion compartment sizes on groundnut shell biochar properties
  8. A review on the conversion of plant husk-based biomass into biochar
  9. Teak leaf biochar production for sustainable forest waste management at low temperatures
  10. Characterization of groundnut shell biochar produced with different stainless steel combustion compartment volumes
  11. Plant biomass-based composites in the maritime industry: A review
  12. Thermochemical co-conversion of biomass-plastic waste to biochar: a review
  13. Balancing strength and sustainability: Incorporating recycled tyres and pawpaw fibre in polystyrene composites
  14. Unlocking the potential of teak seed waste: carbonization for sustainable resource transformation
  15. Advancing the circular economy through the thermochemical conversion of waste to biochar: a review on sawdust waste-derived fuel
  16. Biomass-derived activated carbon monoliths: A review of production routes, performance, and commercialization potential
  17. Hybrid biochar production from biomass and pigmented plastic for sustainable waste-to-energy
  18. Thermo-kinetics, thermodynamics, and ANN modeling of the pyrolytic behaviours of Corn Cob, Husk, Leaf, and Stalk using thermogravimetric analysis
  19. Composition and morphology of biomass-based soot from updraft gasifier system
  20. Solvated polystyrene resin: a perspective on sustainable alternative to epoxy resin in composite development
  21. Conversion of Biomass to Biochar using Top‐lit Updraft Technology: A Review
  22. Mechanical and morphological analyses of flamboyant seed pod biochar/aluminium filings reinforced hybrid polystyrene composite
  23. Preparation of activated carbon monolith from waste biomass using solvated polystyrene-based binder
  24. Microstructural and thermal properties of thermally cured calcined cow bone/kaolin filled hybrid polystyrene composites
  25. Recovery of metallic oxide rich biochar from waste chicken feather
  26. Prospects and problems in the development of biochar-filled plastic composites: a review
  27. Co-carbonization of waste biomass with expanded polystyrene for enhanced biochar production
  28. One-step chemical activation for the production of engineered orange peel biochar
  29. Valorization of waste Biaxially‐oriented polypropylene ( BOPP ) Plastic films by its Co‐carbonization with Almond leaves
  30. Production of thermally cured polystyrene composite reinforced with aluminium powder and clay
  31. Thermal energy recovery and valorisation of Delonix regia stem for biochar production
  32. Thermal recycling strategy of Coca-Cola PVC label films by its co-carbonization with Terminalia ivorensis leaves
  33. Thermochemical Conversion of African balsam leaves‐cow dung hybrid wastes into biochar
  34. Production and properties of the fibrillated plastic composite from recycled polystyrene and Luffa cylindrica
  35. Retort carbonization of bamboo (Bambusa vulgaris) waste for thermal energy recovery
  36. A Study on the Hybrid Polystyrene Composite Filled with Elephant-Grass-Biochar and Doped-Aluminium-Content
  37. Effect of Salt Impregnation on the properties of Orange Albedo Biochar
  38. Metal oxide rich char from muffle furnace and retort heated reactor treated cow bone
  39. Development and characterization of microstructural and mechanical properties of hybrid polystyrene composites filled with kaolin and expanded polyethylene powder
  40. Mechanical and microstructural properties of expanded polyethylene powder/mica filled hybrid polystyrene composites
  41. Thermochemical Conversion of Sponge Gourd (Luffa cylindrica) for Biochar Production by Retort Carbonization
  42. A study on the thermochemical co-conversion of poultry litter and elephant grass to biochar
  43. Effect of fiber content on the physical and mechanical properties of plantain fiber reinforced polystyrene composite
  44. Recycling of Delonix regia Pods Biochar and Aluminium Filings in the Development of Thermally Conducting Hybrid Polystyrene Composites
  45. Multi-objective Optimization, Process Scale-up Techno-Economics and Uncertainty analysis of Microwave-Assisted Extraction of Phenolic-Rich Extract from Allium sativum
  46. Microstructural and mechanical properties of the plantain fiber/local clay filled hybrid polystyrene composites
  47. Regulation of Color, pH, and Biochemical Oxygen Demand of Asa River Water Using a Luffa cylindrica Biomass Packed Bed
  48. Effect of light on concomitant sequestration of Cu(II) and photodegradation of tetracycline by H-MOR/H-β/H-ZSM5 zeolites
  49. Multi-layer perceptron artificial neural network (MLP-ANN) prediction of biomass higher heating value (HHV) using combined biomass proximate and ultimate analysis data
  50. Crystallographic, Functional Group and Microstructural Properties of Oil Palm Biochar Reinforced Hybrid Polystyrene Composite Doped with Aluminium
  51. Preparation and properties of wood dust (isoberlinia doka) reinforced polystyrene composites
  52. A systematic review of pure metals reinforced plastic composites
  53. 3D reconstruction and morphological analysis of electrostimulated hyperthermophile biofilms of Thermotoga neapolitana
  54. ANN modelling of the steam reforming of naphthalene based on non-stoichiometric thermodynamic analysis
  55. Materials-to-product potentials for sustainable development in Nigeria
  56. Moisture absorption, thermal and microstructural properties of polymer composites developed from rice husk and polystyrene wastes
  57. Retort-heating carbonisation of almond (Terminalia catappa) leaves and LDPE waste for biochar production: evaluation of product quality
  58. Thermodynamic modelling of dimethyl ether steam reforming
  59. ANN Modelling of the Adsorption of Herbicides and Pesticides Based on Sorbate-Sorbent Interphase
  60. Modelling the Valorisation of Cassava Peel (Manihot esculenta) Waste Via Pyrolysis and in-Line Steam Reforming
  61. Artificial Neural Network Modeling of the Water Absorption Behavior of Plantain Peel and Bamboo Fibers Reinforced Polystyrene Composites
  62. Prediction of chloride ingress for palm kernel shell concrete
  63. Evaluation of fresh and hardened properties of blended silica fume self-compacting concrete (SCC)
  64. Artificial intelligence for surface water quality monitoring and assessment: a systematic literature analysis
  65. Thermochemical Co-conversion of Sugarcane Bagasse-LDPE Hybrid Waste into Biochar
  66. Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media
  67. Evaluation of Luffa cylindrica fibres in a biomass packed bed for the treatment of fish pond effluent before environmental release
  68. Contamination issues in sachet and bottled water in Nigeria: a mini-review
  69. A review on Luffa fibres and their polymer composites
  70. An empirical review of the recent advances in treatment of natural fibers for reinforced plastic composites
  71. Adsorption of Ciprofloxacin from Water: A Comprehensive Review
  72. A systematic literature analysis of the nature and regional distribution of water pollution sources in Nigeria
  73. Recent advances on the adsorption of herbicides and pesticides from polluted waters: performance evaluation via physical attributes
  74. Application of artificial neural networks in predicting biomass higher heating value: an early appraisal
  75. Application of linear regression algorithm and stochastic gradient descent in a machine‐learning environment for predicting biomass higher heating value
  76. Development of high-performance self compacting concrete using eggshell powder and blast furnace slag as partial cement replacement
  77. Utilisation of machine learning algorithms for the prediction of syngas composition from biomass bio-oil steam reforming
  78. Thermochemical conversion of oil palm Fiber‐LDPE hybrid waste into biochar
  79. Al, Fe and Cu waste metallic particles in conductive polystyrene composites
  80. A perspective on environmental sustainability in the cement industry
  81. A Comprehensive Review of Water Quality Monitoring and Assessment in Nigeria
  82. Competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from aqueous media using biochar from oil palm (Elaeis guineensis) fibers: a kinetic and equilibrium study
  83. Valorization of Plantain Stalk and Polystyrene Wastes for Composite Development
  84. Competitive Biosorption of Pb(II) and Cu(II) by Functionalised Micropogonias undulates Scales
  85. Investigation of Biomaterial Characteristics of Chitosan Produced from Crab Shells
  86. Adsorption of pollutants by plant bark derived adsorbents: An empirical review
  87. Physical and mechanical properties of cement-bonded particle board produced from African balsam tree (Populous Balsamifera) and periwinkle shell residues
  88. Air Gasification of Banana (Musa spp.) Residues to Produce Biofuels
  89. Evaluation of Luffa Cylindrica Fibers in A Biomass Packed Bed for The Treatment of Paint Industry Effluent Before Environmental Release
  90. Effect of Process Variables on The Crevice Corrosion in Type-304 Stainless Steels
  91. Simulation of Low Density Polyethylene (LDPE) Pyrolysis and Optimisation of Pyro-Oil Yield
  92. Mitigation of Diclofenac Pollution in Aqueous Media by Adsorption
  93. Statistical Modelling and Optimisation of the Biosorption of Cd(II) and Pb(II) onto Dead Biomass of Pseudomonas Aeruginosa
  94. A mini-review of the morphological properties of biosorbents derived from plant leaves
  95. Effects of selected bleaching agents on the functional and structural properties of orange albedo starch-based bioplastics
  96. Biochar from the Thermochemical Conversion of Orange (Citrus sinensis) Peel and Albedo: Product Quality and Potential Applications
  97. Modelling of thermochemical energy recovery processes for switchgrass (Panicum virgatum)
  98. FEA of effective elastic properties of banana fiber-reinforced polystyrene composite
  99. Computer-Aided Modeling of Thermochemical Conversion Processes for Environmental Waste Management
  100. Utilization of Recycled Polystyrene and Aluminum Wastes in the Development of Conductive Plastic Composites: Evaluation of Electrical Properties
  101. Valorisation of Cocoa (Theobroma cacao) pod husk as precursors for the production of adsorbents for water treatment
  102. ASPEN Plus predictive simulation of soft and hard wood pyrolysis for bio-energy recovery
  103. Mitigation of Metronidazole (Flagyl) pollution in aqueous media by adsorption: a review
  104. Factor effects and interactions in steam reforming of biomass bio-oil
  105. Development of natural fibre reinforced polystyrene (NFRP) composites: Impact resistance study
  106. Effect of metallic fillers on the hardness of polystyrene composites: An experimental investigation
  107. Modeling the valorization of poultry litter via thermochemical processing
  108. Recycling Copper and Polystyrene from Solid Waste Stream in Developing Conductive Composites
  109. Modelling and optimisation of biodiesel production from Euphorbia lathyris using ASPEN Hysys
  110. Multi-scale finite element analysis of effective elastic property of sisal fiber-reinforced polystyrene composites
  111. Response surface modelling and optimisation of biodiesel production from Avocado plant (Persea americana) oil
  112. Thermodynamic modelling and temperature sensitivity analysis of banana (Musa spp.) waste pyrolysis
  113. Production of Bio-Char from Plantain (musa Paradisiaca) Fibers Using an Updraft Biomass Gasifier with Retort Heating
  114. A review of coir fiber reinforced polymer composites
  115. Assessment of Carbonised Wood-Flour Fillers on the Mechanical Properties of Natural Rubber Vulcanisates
  116. Banana and plantain fiber-reinforced polymer composites
  117. Modelling of integrated processes for the pyrolysis and steam reforming of rice husk (Oryza sativa)
  118. A Thermodynamic Study of Rice Husk (Oryza Sativa) Pyrolysis
  119. Steam Reforming of Acetic Acid: Response Surface Modelling and Study of Factor Interactions
  120. A review of steam reforming of glycerol
  121. Production of Biochar from Elephant (Napier) Grass
  122. Hydrogen production by the steam reforming of waste lubricating oil
  123. Steam Reforming of Biomass Pyrolysis Oil: A Review
  124. Modeling of integrated processes for the recovery of the energetic content of sugar cane bagasse
  125. BIOSORPTION OF POLLUTANTS BY PLANT LEAVES: AN EMPIRICAL REVIEW
  126. Barrier property enhancement of starch citrate bioplastic film by an ammonium-thiourea complex modification
  127. Modelling and simulation of banana (Musa spp.) waste pyrolysis for bio-oil production
  128. Process Integration and Feedstock Optimisation of a Two-Step Biodiesel Production Process from Jatropha Curcas Using Aspen Plus
  129. Modelling stochastic response of type 304 stainless steel (SS-304) crevice corrosion in chloride environments
  130. Computer aided modelling of low density polyethylene pyrolysis to produce synthetic fuels
  131. Computer Aided Simulation of the Pyrolysis of Waste Lubricating Oil Using Aspen Hysys
  132. Synthesis and Structural analysis of Aluminium-filled Polystyrene Composites from Recycled Wastes
  133. Modeling of Pore-Blocking Behaviors of Low-Pressure Membranes during Constant-Pressure Filtration of an Agro-Industrial Wastewater
  134. Simulated Model for Glycerol Steam Reforming
  135. Preparation and Evaluation of Electrical Properties of Plastic Composites Developed from Recycled Polystyrene and Local Clay
  136. Process optimisation and characterisation of fragrance suited mechanically expressed Nigerian lime seed oil
  137. Identification and Characterisation of Major Hydrocarbons in Thermally Degraded Low Density Polyethylene Films
  138. Development of particleboard from waste styrofoam and sawdust
  139. Factorial Design based Optimisation of Crevice Corrosion for Type 304 Stainless Steel in Chloride Solutions