All Stories

  1. Voltage Stability Assessment and identification of important nodes
  2. Coordination control of robot manipulators using flat outputs
  3. Wind‐Driven Self‐Excited Reluctance Generator for Rural Electrification
  4. Fault investigation methods on power transmission line: A comparative study
  5. Estimation of Wind Speed Statistical Distribution at Vredendal, South Africa
  6. VARIATION IN PHASE SHIFT OF MULTI-CIRCUITS HVTLS PHASE CONDUCTOR ARRANGEMENTS ON THE INDUCED VOLTAGE ON BURIED PIPELINE: A THEORETICAL STUDY
  7. Inherent structural characteristics approach for solving loss allocation problems
  8. Detection of weak bus through Fast Voltage Stability index and inherent structural characteristics of power system
  9. Identification of vulnerable transmission lines in power system switching operations
  10. Prediction of voltage collapse through voltage collapse proximity index and inherent structural characteristics of power system
  11. A comparison of voltage collapse point prediction capabilities of voltage stability index and inherent structural characteristics
  12. Spatial magnetic field polarization below balanced double-circuit linear configured power lines for six phase arrangements
  13. Inherent structural characteristics based approach for solving generation-load allocation problems
  14. Diagnosis of rotor inter-turn fault of electrical machine at speed using stray flux test method
  15. Assessment model for monitoring AC induced interference corrosion of buried pipelines from HVTLs
  16. Wavelet multi-resolution based faults investigation on power system transmission line
  17. Planar magnetic field distribution underneath two-circuit linear configured power lines in various phase arrangements
  18. Effects of soil properties on corrosion of buried steel pipeline: A case study of rand water pipeline, South Africa
  19. Finite element re-design of a composite piezoelectric actuator
  20. Particle swarm optimization for power system state estimation
  21. Transmission dispatch for loss minimisation using linearised power flow equations in mixed integer programming
  22. Stateflow® Aided Modelling and Simulation of Friction in a Planar Piezoelectric Actuator
  23. Modelling and Analysis of Higher Phase Order (HPO) Squirrel Cage Induction Machine
  24. Influence of loading conditions in solving power system problems
  25. An option for solving power system problems in the emerging power system networks
  26. Fault location in transmission lines based on stationary wavelet transform, determinant function feature and support vector regression
  27. Voltage Profiles Enhancement and Loss Reduction in Weak Meshed Networks
  28. OPERATING STRATEGIES AND CAPACITOR VOLTAGE BALANCE STRATEGIES FOR A CASCADED “3-5-9 HYBRID INVERTER FOR GRID INTERFACE APPLICATION
  29. Understanding the Impacts of GDP and Population in South Africa's Energy Consumption
  30. A Study on the Sustainability Aspects of High Temperature Superconductivity
  31. Effects of Phase Shifting Transformers on Weak and Ill-Conditioned Network: Nigerian 330kV Grid System
  32. HVDS Analysis for Technical Loss Reduction in Power Distribution System
  33. Stationary wavelet transform and single differentiator based decaying DC-offset filtering in post fault measurements
  34. Assessing the energy potential in the South African industry: A combined IDA-ANN-DEA (Index Decomposition Analysis-Artificial Neural Network-Data Envelopment Analysis) model
  35. An Inductive Power Transfer through metal object
  36. Performance analysis of a three-phase induction motor with double-triple winding layout
  37. Trajectory control of a two-link robot manipulator in the presence of gravity and friction
  38. On the adaptation of South Africa experience to combine solar energy and Smart Grid in Namibia
  39. Inherent structural characteristic indices of power system networks
  40. Torque ripple analysis of three-phase induction machines with Non-Uniform Coil Groups Distribution
  41. Dynamic Response of a Wind Farm Consisting of Doubly-Fed Induction Generators to Network Disturbance
  42. Reactive Power Reserve Improvement Using Power Systems Inherent Structural Characteristics
  43. Torque Ripple Analysis with Loss of One or Two Phases of an Alternative Winding Layout for Five-Phase Induction Machines
  44. Performance Analysis of Induction Machines with Unconventional Winding Configurations
  45. Nonlinear control of a single-link flexible joint manipulator using differential flatness
  46. Relationship between generator affinity and voltage profile improvement
  47. Realization of a “3 & 6 phase” induction machine
  48. Torque ripple reduction in five-phase induction machines using mixed winding configurations
  49. Novel heuristic and SVM based optimization algorithm for improving distribution feeder performance
  50. A cascaded hybrid inverter with improved DC-link voltage control for grid connected systems
  51. Investigating the steady state behavior of thyristor controlled series capacitor
  52. Stability Analysis of a Single-Machine Dynamic Load System with TCSC
  53. Flat controller design for hardware-cost reduction in polar-axis photovoltaic systems
  54. Enhancing the Efficient Consumption of Energy in the Canadian Industrial Sector: IDA-DEA Integration Approach
  55. Uncertainty Analysis of the Impact of Intermittent Wind Generation on Power System Oscillations
  56. Modeling, Control and Simulation of Cascaded 3-5-9 Hybrid Inverter Topology for Grid Interface Application
  57. Importance of Fault Current Limiting Devices in Power Grid for Extending the Lifetime of Expensive Equipment
  58. Performance Evaluation of Sampling Techniques in Monte Carlo Simulation-based Probabilistic Small Signal Stability Analysis
  59. Frictional Effects in a Low Speed Polar-Axis Solar Tracker
  60. The ieee 34 node radial test feeder as a simulation testbench for Distributed Generation
  61. Optimal location of network devices using a novel inherent network topology based technique
  62. A novel fault features extraction scheme for power transmission line fault diagnosis
  63. Optimal reactive power control in transmission network with a large wind farm connection
  64. The impact of wind power on the transient stability of a power system using probabilistic approach
  65. Energy efficiency assessment using artificial neural network combined with data envelopment analysis
  66. Hybrid cascaded multilevel inverter with improved DC-link voltage control for grid connected systems
  67. Distribution network phase load balancing as a combinatorial optimization problem using fuzzy logic and Newton–Raphson
  68. Description of the Internal State of TCSC
  69. A Decaying DC-Offset Filtering Scheme based on the Stationary Wavelet Transform
  70. Determinant-based feature extraction for fault detection and classification for power transmission lines
  71. The state of the art proton exchange membrane fuel cells for clean energy
  72. Modeling and control of a cascaded NPC/H-Bridge inverter with LCL filter in PV- Grid application
  73. Mitigation of cascade blackout in Power Systems by using Widest Path and Power Flow Redistribution Algorithms
  74. Fault Current Limiter Application
  75. The Impact of Wind Power Loading on the Power System Transient Stability
  76. OLTC Control System using Fuzzy Logic System for Paralleled Mismatched Power Transformers
  77. Analysis of synchronous reluctance machine with magnetically coupled three-phase windings and reactive power compensation
  78. Optimization of radio frequency usage: A case study of Ondo State Television broadcast Nigeria
  79. Analytical design and analysis of Line-Start Permanent Magnet Synchronous Motors
  80. A cascaded NPC/H-Bridge inverter with simplified control strategy and minimum component count
  81. Analysis of bus voltage regulation and OLTC performance on mismatched parallel-connected transformers
  82. Feasibility study of a hybrid PV-micro hydro system for rural electrification
  83. LV self balancing distribution network reconfiguration for minimum losses
  84. Phase Load Balancing in the Secondary Distribution Network Using a Fuzzy Logic and a Combinatorial Optimization Based on the Newton Raphson
  85. Enhancing the Output Characteristics of a Photovoltaic Position Sensor Using a Feed-Forward Neural Network
  86. Stability improvement of Centurion electric power network using FACTS controllers
  87. Economic and environmental analysis of micro hydropower system for rural power supply
  88. Adisa A. Jimoh (MIEEE 1986)
  89. Synchronous reluctance machine with controlled capacitance injection
  90. Reconfiguration and Load Balancing in the LV and MV Distribution Networks for Optimal Performance
  91. Improving three-phase induction machines power factor using single phase auxiliary winding fed by an active power filter
  92. Feedback-linearised control of a solar power platform with nonlinear measurements
  93. Phase load balancing in the secondary distribution network using fuzzy logic
  94. Multilevel high power converters for reversible power flow between utilities and power pool transmission corridor
  95. Multilevel high power converters for reversible power flow between utilities and power pool transmission corridor
  96. Stability of the line-start permanent magnet synchronous motor sensorless drive
  97. On-line remote and automatic switching of consumers’ connection for optimal performance of a distribution feeder
  98. Performance enhancement of synchronous reluctance machine using split winding and capacitance injection
  99. On-line remote and automatic switching of consumers’ connection for optimal performance of a distribution feeder
  100. A Three-Phase Induction Motor with Power Electronic Controlled Single-Phase Auxiliary Stator Winding
  101. LV and MV Distribution Networks Reconfiguration for Minimum Losses
  102. Active Power Control for Capacitive Divider Tapping Method
  103. A Study of Improving the Power Factor of a Three-Phase Induction Motor Using a Static Switched Capacitor
  104. LV and MV Distribution Networks Reconfiguration for Minimum Losses
  105. Active Power Control for Capacitive Divider Tapping Method
  106. Strategy for power quality improvement and maximum demand smoothing
  107. Load balancing in distribution feeder through reconfiguration
  108. A study of insulation failure in a high voltage current transformer
  109. Thermal effects of stray load losses in induction machines
  110. Parasitic torques in saturated induction motors
  111. Voltage Stability Analysis of a Distributed Network Incorporating Wind Power Resource
  112. PSO Based Flat Control of a Single Link Flexible Manipulator
  113. Feeder reconfiguration for load balancing
  114. A thermal model for the study of stray load losses in induction motors
  115. Universal feedback controller for squirrel-cage induction motor drive using quantitative feedback theory
  116. Influence of distribution generation on distribution network performance
  117. Self-excitation in PWM inverter excited single-phase induction generator
  118. Thermal effects of stray load losses in induction machines
  119. Parameter estimation of single-phase induction machines