All Stories

  1. Special collection on recent trends in design and additive manufacturing

    Article • Advances in Mechanical Engineering, December 2019, SAGE Publications

    Abdel-Hamid Ismail Mourad

  2. Optimization of stir–squeeze casting parameters for production of metal matrix composites using a hybrid analytical hierarchy process–Taguchi-Grey approach

    Article • Engineering Optimization, August 2019, Taylor & Francis

    Dr. Sujan Piya, Mr MURALIRAJA Rajaraman, Abdel-Hamid Ismail Mourad, Dr. Krishnan Pradeep Kumar

  3. Impact of co-mixing technique and surface modification of ZnO nanoparticles using stearic acid on their dispersion into HDPE to produce HDPE/ZnO nanocomposites

    Article • Polymers and Polymer Composites, May 2019, SAGE Publications

    Abdel-Hamid Ismail Mourad

  4. Development of Date Pit–Polystyrene Thermoplastic Heat Insulator Material: Physical and Thermal Properties

    Article • International Journal of Polymer Science, March 2019, Hindawi Publishing Corporation

    Basim Abu-Jdayil, Abdel-Hamid Ismail Mourad

  5. HDPE/TiO2 Nanocomposite: Fabrication and Optimization of Mechanical Property by RSM and ANN

    Article • Solid State Phenomena, February 2019, Trans Tech Publications

    Abdel-Hamid Ismail Mourad

  6. Bilirubin detoxification using different phytomaterials: characterization and in vitro studies

    Article • International Journal of Nanomedicine, May 2018, Dove Medical Press

    Abdel-Hamid Ismail Mourad, amr amin, Sawsan Dagher, Shaima Raji, Prof. Sulaiman Al-Zuhair

  7. Anisotropy evolution of low density polyethylene greenhouse covering films during their service life

    Article • Polymer Testing, April 2018, Elsevier

    Abdel-Hamid Ismail Mourad

  8. Large-Scale 3D Printing: The Way Forward

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Abdel-Hamid Ismail Mourad

  9. Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Abdel-Hamid Ismail Mourad

  10. Biodegradable Scaffolds for Gastric Tissue Regeneration

    Article • December 2017, IntechOpen

    Abdel-Hamid Ismail Mourad

  11. REALIZATION AND CHARACTERIZATION OF A NEW ORGANIC THIN FILM SEMICONDUCTOR

    Article • Surface Review and Letters, December 2017, World Scientific Pub Co Pte Lt

    Abdel-Hamid Ismail Mourad

  12. Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles

    Article • July 2017, ASME International

    Abdel-Hamid Ismail Mourad

  13. Thermomechanical Characteristics of Compacted and Non-Compacted Plain Weave Woven Laminated Composites

    Article • July 2017, ASME International

    Abdel-Hamid Ismail Mourad

  14. Tribological Analysis of Thermal Spray Coatings of Ni and Al2O3 With Dispersion of Solid Lubricants in Wear Modes

    Article • July 2017, ASME International

    Abdel-Hamid Ismail Mourad

  15. Adsorption Study of Albumin Bound Bilirubin Over Date Pits Activated Carbon

    Article • Advanced Science Letters, May 2017, American Scientific Publishers

    Abdel-Hamid Ismail Mourad

  16. Development of polymeric heat insulators based on emirati red shale filler: Thermal and physical properties

    Article • Polymer Composites, March 2017, Wiley

    Abdel-Hamid Ismail Mourad

  17. On the Injection Molding Processing Parameters of HDPE-TiO2 Nanocomposites

    Article • Materials, January 2017, MDPI AG

    Abdel-Hamid Ismail Mourad

  18. Adsorption of Bilirubin Toxin in Liver by Chitosan Coated Activated Carbon Prepared from Date Pits

    Article • January 2017, Springer Science + Business Media

    Abdel-Hamid Ismail Mourad

  19. Durability of mono-layer versus tri-layers LDPE films used as greenhouse cover: Comparative study

    Article • Arabian Journal of Chemistry, September 2016, Elsevier

    Abdel-Hamid Ismail Mourad

  20. Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis

    Article • Materials, August 2016, MDPI AG

    Abdel-Hamid Ismail Mourad

  21. Synthesis and characterization of a new organic semiconductor material

    Article • Materials Chemistry and Physics, August 2016, Elsevier

    Abdel-Hamid Ismail Mourad

  22. Experimental Investigation of Kevlar KM2Plus Nano-Reinforced Laminated Composite Thermo-Mechanical Properties

    Article • July 2016, ASME International

    Abdel-Hamid Ismail Mourad

  23. EXPERIENCE IN TEACHING ENTREPRENEURS USING DIFERENT APPROACHES IN CAPSTONE COURSE IN A MASTER OF ENGINEERING MANAGEMENT PROGRAM

    Article • July 2016, IATED Academy, S.L.

    Abdel-Hamid Ismail Mourad

  24. Polymeric nanobiocomposites for biomedical applications

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, February 2016, Wiley

    Abdel-Hamid Ismail Mourad

  25. A Proposed Generalized Model for Forming Limit Diagram

    Article • July 2015, ASME International

    Abdel-Hamid Ismail Mourad

  26. Nano-SiO2 Enriched Biocompatible Powder Coatings

    Article • Materials Today Proceedings, January 2015, Elsevier

    Abdel-Hamid Ismail Mourad

  27. Fracture Toughness Measurements From Circumferentially-Notched Pipes Tests

    Article • Materials Performance and Characterization, July 2014, ASTM International

    Abdel-Hamid Ismail Mourad

  28. NanoTiO2-Enriched Biocompatible Polymeric Powder Coatings: Adhesion, Thermal and Biological Characterizations

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Abdel-Hamid Ismail Mourad

  29. Novel Technique for Normalizing Load–Displacement Curves in Fracture Testing

    Article • Materials Performance and Characterization, June 2014, ASTM International

    Abdel-Hamid Ismail Mourad

  30. Effect of membranes on oxygen transfer rate and consumption within a newly developed three-compartment bioartificial liver device: Advanced experimental and theoretical studies

    Article • Biotechnology and Applied Biochemistry, March 2014, Wiley

    Abdel-Hamid Ismail Mourad

  31. Degradation of thermomechanical performance and lifetime estimation of multilayer greenhouse polyethylene films under simulated climatic conditions

    Article • Polymer Engineering & Science, February 2014, Wiley

    Abdel-Hamid Ismail Mourad

  32. Impact of Degradation of Polyethylene Films Under Simulated Climatic Conditions on Their Mechanical Behaviour and Thermal Stability and Lifetime

    Article • July 2012, ASME International

    Abdel-Hamid Ismail Mourad

  33. Prediction of the Mechanical Properties of PE/PP Blends Using Artificial Neural Networks

    Article • Procedia Engineering, January 2011, Elsevier

    Abdel-Hamid Ismail Mourad

  34. Notch Radius and Specimen Size Effects on Fracture Toughness of Low Alloy Steel

    Article • Procedia Engineering, January 2011, Elsevier

    Abdel-Hamid Ismail Mourad

  35. Ageing Effect on the Properties of Tri-Layer Polyethylene Film Used as Greenhouse Roof

    Article • Procedia Engineering, January 2011, Elsevier

    Abdel-Hamid Ismail Mourad

  36. Thermo-mechanical characteristics of thermally aged polyethylene/polypropylene blends

    Article • Materials & Design (1980-2015), February 2010, Elsevier

    Abdel-Hamid Ismail Mourad

  37. Fracture Behavior of Friction Stir Spot Welded Joint

    Article • January 2010, ASME International

    Abdel-Hamid Ismail Mourad

  38. Characterisation of thermally treated and untreated polyethylene–polypropylene blends using DSC, TGA and IR techniques

    Article • Plastics Rubber and Composites Macromolecular Engineering, October 2009, Taylor & Francis

    Abdel-Hamid Ismail Mourad

  39. Effect of Machining Process on Stable Crack Growth

    Article • January 2009, ASME International

    Abdel-Hamid Ismail Mourad

  40. UV irradiation and aging effects on nanoscale mechanical properties of ultra high molecular weight polyethylene for biomedical implants

    Article • Plastics Rubber and Composites Macromolecular Engineering, October 2008, Taylor & Francis

    Abdel-Hamid Ismail Mourad

  41. Impact of Blending Ratio and Thermal Treatment on the Mechanical Behaviour of Polyethylene/Polypropylene Blends

    Article • January 2008, ASME International

    Abdel-Hamid Ismail Mourad

  42. Assessment of the Effect of the Notch Radius on Ductile Stable Crack Growth

    Article • January 2008, ASME International

    Abdel-Hamid Ismail Mourad

  43. Characterisation of Ductile Crack Growth Behaviour Through a Novel Normalised P-Δ

    Article • January 2007, ASME International

    Abdel-Hamid Ismail Mourad

  44. Effect of Stress State on Mode II Stable Crack Extension

    Article • November 2005, CrossRef Test Account

    Abdel-Hamid Ismail Mourad

  45. Effect of Stress State on Mode II Stable Crack Extension

    Article • Key Engineering Materials, November 2005, Trans Tech Publications

    Abdel-Hamid Ismail Mourad

  46. Effect of Die Drawing Process on the Mechanical Behaviour of Polypropylene

    Article • Key Engineering Materials, April 2004, Trans Tech Publications

    Abdel-Hamid Ismail Mourad

  47. Stable Crack Extension through AISI 4340 Steel: Experimental Investigation

    Article • Key Engineering Materials, April 2004, Trans Tech Publications

    Abdel-Hamid Ismail Mourad