All Stories

  1. First Principles Study on Zn doped MgO using Hubbard U correction

    Article • Materials Research Express, March 2019, Institute of Physics Publishing

    Dr Ab Malik Marwan Bin Ali

  2. Investigation of structural, electronic and optical properties of hexagonal LuFeO3using first principles LDA  +  U

    Article • Materials Research Express, April 2017, Institute of Physics Publishing

    Dr Ab Malik Marwan Bin Ali

  3. FTIR Spectrum Investigation of Thionine-Graphene Nanocomposite

    Article • Applied Mechanics and Materials, April 2017, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  4. Effect of Phenylene Diamine Antioxidant on Physico-Chemical Properties of Methyl Grafted Natural Rubber Polymer Electrolytes

    Article • Applied Mechanics and Materials, April 2017, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  5. Dielectric behaviour of UV-crosslinked sulfonated poly (ether ether ketone) with methyl cellulose (SPEEK-MC) as proton exchange membrane

    Article • International Journal of Hydrogen Energy, April 2017, Elsevier

    Dr Ab Malik Marwan Bin Ali

  6. Efficiency enhancement of dye-sensitized solar cell utilizing copper indium sulphide/zinc sulphide quantum dot plasticized cellulose acetate polymer electrolyte

    Article • Materials Research Express, March 2017, Institute of Physics Publishing

    Dr Ab Malik Marwan Bin Ali

  7. Structural,electronic and optical properties of brookite phase titanium dioxide

    Article • Materials Research Express, March 2017, Institute of Physics Publishing

    Dr Ab Malik Marwan Bin Ali

  8. Structural, electronic and optical properties of Bi2O3 polymorphs by first-principles calculations for photocatalytic water splitting

    Article • Materials Research Express, March 2017, Institute of Physics Publishing

    Dr Ab Malik Marwan Bin Ali

  9. Exploration on effects of 15 nm SiO2 filler on miscibility, thermal stability and ionic conductivity of PMMA/ENR 50 electrolytes

    Article • January 2017, American Institute of Physics

    Dr Ab Malik Marwan Bin Ali

  10. Blends of hexanoyl chitosan/epoxidized natural rubber doped with EMImTFSI

    Article • Ionics, December 2016, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  11. Effect of ionic liquid incarceration during free radical polymerization of PMMA on its structural and electrical properties

    Article • Ionics, September 2016, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  12. Structural and Magnetic Study on the Effect of Substitution of Cobalt by d-Valent Elements of Co2FeSi Heusler Alloy

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    mrs siti sumaiyah sheikh abdul aziz, Dr Ab Malik Marwan Bin Ali

  13. Comparison Studies Of SiO2 and HCl-SiO2 Filler On The Film Formation And Ionic Conductivity Of PMMA/ENR 50 Electrolytes

    Article • Advanced Materials Letters, June 2016, VBRI Press

    Dr Ab Malik Marwan Bin Ali

  14. X-Ray Diffraction and Infrared Studies on Plasticized Cellulose Acetate Complexed with Ammonium Iodide for Solid Polymer Electrolyte

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali, Dr Rosnah Zakaria

  15. Electrochemical Properties of Glyme Based Plasticizer on Gel Polymer Electrolytes Doped with Lithium Bis(Trifluoromethanesulfonyl)Imide

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  16. First-Principles Study on Structural, Electronic and Optical Properties of TiO2 for Dye-Sensitized Solar Cells Photoanode

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali, mrs siti sumaiyah sheikh abdul aziz

  17. Structural, Electronic and Optical Properties of Nd-Doped Anatase TiO2 for Dye-Sensitized Solar Cells from Density Functional Theory

    Article • Materials Science Forum, March 2016, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali, mrs siti sumaiyah sheikh abdul aziz

  18. Hubbard U calculations on optical properties of 3 d transition metal oxide TiO 2

    Article • Results in Physics, January 2016, Elsevier

    Dr Ab Malik Marwan Bin Ali

  19. The Effect of LiCF3SO3 Complexed MG30-PEMA Blend Solid Polymer Electrolyte

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  20. Conductivity and Thermal Behaviour of Epoxidized-30% Poly (Methyl Methacrylate)-Grafted Natural Rubber-Lithium Triflate Based Solid Polymer Electrolytes

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali, Dr Rosnah Zakaria

  21. Conductivity-Temperature Dependent Studies on MG49 Doped Lithium Triflate Salt

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  22. Impedance Behavior of Treated Methyl-Grafted Natural Rubber Polymer Electrolytes

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali, Dr Rosnah Zakaria

  23. An Investigation of Structural and Electronic Properties of Novel Cathode Material Li2MnP2O7 and its Delithiated Li2-xMnP2O7 (x=1,2): A First Principle Study

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  24. Glucose-Reduced MnO2/Graphene Composites Electrode for Supercapacitor

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  25. Cellulose acetate–lithium bis(trifluoromethanesulfonyl)imide solid polymer electrolyte: ATR-FTIR and ionic conductivity behavior

    Article • Functional Materials Letters, June 2015, World Scientific Pub Co Pte Lt

    Dr Ab Malik Marwan Bin Ali

  26. Optical Transition, Excitation, and Emission Properties of Poly(N-Vinlycarbazole) Blended with Poly(Vinylidene Fluoride-co-Hexafluoropropene) and Polyvinylpyrrolidone

    Article • Acta Physica Polonica A, April 2015, Institute of Physics, Polish Academy of Sciences

    Dr Ab Malik Marwan Bin Ali

  27. Optical Transition, Excitation, and Emission Properties of Poly(N-Vinlycarbazole) Blended with Poly(Vinylidene Fluoride-co-Hexafluoropropene) and Polyvinylpyrrolidone

    Article • Acta Physica Polonica A, April 2015, Institute of Physics, Polish Academy of Sciences

    Dr Ab Malik Marwan Bin Ali

  28. Effect of epoxidation on 30% poly(methyl methacrylate)-grafted natural rubber polymer electrolytes

    Article • January 2015, American Institute of Physics

    Dr Ab Malik Marwan Bin Ali

  29. Preparation and characterization of polymer blend based on sulfonated poly (ether ether ketone) and polyetherimide (SPEEK/PEI) as proton exchange membranes for fuel cells

    Article • January 2015, American Institute of Physics

    Dr Ab Malik Marwan Bin Ali

  30. Study on Dispersion and Characterization of Functionalized MWCNTs Prepared by Wet Oxidation

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  31. Preparation and Characterization of Epoxidized-30% Poly(methyl methacrylate)-grafted Natural Rubber Polymer Electrolyte

    Article • Journal of Nano Research, June 2014, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  32. First Principles LDA+U Calculations for ZnO Materials

    Article • Integrated Ferroelectrics, May 2014, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  33. Conduction mechanism of lithium bis(oxalato)borate–cellulose acetate polymer gel electrolytes

    Article • Ionics, May 2014, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  34. Ionic Conductivity and Dielectric Properties of LiBF4 Doped PMMA/ENR 50 Filled Acid Modified SiO2 Electrolytes

    Article • Procedia Technology, January 2014, Elsevier

    Dr Ab Malik Marwan Bin Ali

  35. Investigation on modified natural rubber gel polymer electrolytes for lithium polymer battery

    Article • Journal of Power Sources, December 2013, Elsevier

    Prof Dr Hadariah Bahron, Dr Ab Malik Marwan Bin Ali

  36. Influence of Buffer Electrolyte and pH on the Electrochemical Performance of Glucose Oxidase-Laccase Biofuel Cell

    Article • Journal of Biobased Materials and Bioenergy, April 2013, American Scientific Publishers

    Dr Ab Malik Marwan Bin Ali

  37. Effects of Ammonium Tetrafluoroborate on Conductivity and Thermal Studies on Cellulose Acetate Based Polymer Electrolytes

    Article • Advanced Materials Research, March 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  38. Carbon Nanotubes in Cancer Treatment: A Preliminary In Vitro Study Using Neuroblastoma Cells

    Article • Advanced Materials Research, March 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  39. Effect of Temperature on Conductivity Studies of Cellulose Acetate Based Polymer Electrolytes

    Article • Advanced Materials Research, March 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  40. Characterization of Poly(N-vinlycarbazole) Blending with Different Composition by Using Polarized Electronic Spectroscopy

    Article • Advanced Materials Research, February 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  41. Optical Studies of Poly (N-Carbazole) (PVK) Blending with Polyvinylpyrrolidone (PVP) Using Tauc/Davis-Mott Model

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  42. Refractive Index Dispersion and Optical Dielectric Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  43. Excitation and Emission Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends Characterized by Fluorescence Spectroscopy

    Article • Advanced Materials Research, January 2013, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  44. Effect of lithium triflate salt concentration in methyl cellulose-based solid polymer electrolytes

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  45. Thermal oxidation studies on methyl grafted natural rubber polymer electrolytes with paraphenylene diamine additive

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  46. The preparation and characterization of sulfonated poly (ether ether ketone) and Cellulose Acetate (SPEEK-CA) membrane in proton exchange membrane fuel cells (PEMFCs) by UV-crosslink technique

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  47. MG49-KOH-PC alkaline gel polymer electrolytes membrane for supercapacitors

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  48. Conductivity and optical studies of plasticized polymer electrolytes based on 49% PMMA-grafted natural rubber

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  49. Preparation and characterization of Li1.4Al0.4Ti1.6(PO4)3 conducting electrolyte

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  50. Characterization of plasticized grafted natural rubber-30% poly (methyl methacrylate) (MG30) based polymer electrolytes

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  51. Polarized absorption and dielectric spectra of poly (N-carbazole) blends

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  52. Radiation — Induced graft copolymerization base polymer electrolytes

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  53. The effect of composition nanofiller Al2O3 to the conductivity, morphology and thermal properties of MG30-LiTf polymer electrolyte

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  54. Conductivity studies on 30% PMMA grafted NR-NH4CF3SO3 gel polymer electrolytes

    Article • June 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  55. Graft Copolymerazation of 1-Vinylimidazole onto Poly(vinylidene Flouride) by Radiation-Induced Grafting for Fuel Cells Membrane

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Dr Ab Malik Marwan Bin Ali

  56. Electrochemical Studies of Composite Cellulose Acetate-Based Polymer Gel Electrolytes for Proton Batteries

    Article • Proceedings of the National Academy of Sciences India Section A Physical Sciences, January 2012, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  57. Dielectric behaviour of cellulose acetate-based polymer electrolytes

    Article • Ionics, December 2011, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  58. Electrical and physical studies on 49% methyl-grafted natural rubber-based composite polymer gel electrolytes

    Article • Electrochimica Acta, December 2011, Elsevier

    Dr Ab Malik Marwan Bin Ali

  59. Conductivity modification of polymer gel electrolytes: addition of MG49 and SiO2

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  60. Conductivity studies on cellulose acetate–ammonium tetrafluoroborate based polymer electrolytes

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  61. Conductivity studies on plasticised cellulose acetate–ammonium iodide based polymer electrolytes

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  62. Effects of TiO2on conductivity performance of cellulose acetate based polymer gel electrolytes for proton batteries

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  63. Effects of UV irradiation time on electrical, physical and thermal properties of SPEEK–CS composite membranes

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  64. Effects of lithium salt on chitosan-g-PMMA based polymer electrolytes

    Article • Materials Research Innovations, August 2011, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  65. Natural rubber-grafted with 30% poly(methylmethacrylate) characterization for application in lithium polymer battery

    Article • December 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Ab Malik Marwan Bin Ali

  66. Effect of Plasticizers on Methyl Cellulose-Based Alkaline Solid Polymer Electrolytes

    Article • January 2010, American Institute of Physics

    Dr Ab Malik Marwan Bin Ali

  67. Proton Conductivity Studies on Biopolymer Electrolytes

    Article • January 2010, American Institute of Physics

    Dr Ab Malik Marwan Bin Ali

  68. Frequency dependent conductivity studies on PMMA–LiCF3SO3 polymer electrolytes

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Prof Dr Hadariah Bahron, Dr Ab Malik Marwan Bin Ali

  69. Electrical conductivity of solvent free PEO based polymer electrolytes

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  70. Electrical properties of PEO–LiCF3SO3–SiO2 nanocomposite polymer electrolytes

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  71. Conductivity studies of phosphonated methylcellulose membrane

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  72. Effects of double solvents/plasticisers on proton conducting gel polymer electrolytes

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  73. Electrochemical performance of anode material from palm oils derived carbon nanotubes for lithium ion batteries

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  74. Gel polymer electrolyte based on methyl-grafted natural rubber for proton batteries

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  75. PLASTICIZED PVA/PVP–KOH ALKALINE SOLID POLYMER BLEND ELECTROLYTE FOR ELECTROCHEMICAL CELLS

    Article • Functional Materials Letters, September 2009, World Scientific Pub Co Pte Lt

    Dr Ab Malik Marwan Bin Ali

  76. Solid state proton battery using plasticised cellulose–salt complex electrolyte

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  77. Studies on cellulose acetate-based gel polymer electrolytes for proton batteries

    Article • Materials Research Innovations, September 2009, Taylor & Francis

    Dr Ab Malik Marwan Bin Ali

  78. The Coagulation Impact of 50% Epoxidised Natural Rubber Chain in Ethylene Carbonate-Plasticized Solid Electrolytes

    Article • Macromolecular Symposia, February 2009, Wiley

    Dr Ab Malik Marwan Bin Ali

  79. Electrochemical studies on epoxidised natural rubber-based gel polymer electrolytes for lithium–air cells

    Article • Journal of Power Sources, August 2008, Elsevier

    Dr Ab Malik Marwan Bin Ali

  80. Grafted natural rubber-based polymer electrolytes: ATR-FTIR and conductivity studies

    Article • Ionics, January 2008, Springer Science + Business Media

    Prof Dr Hadariah Bahron, Dr Ab Malik Marwan Bin Ali

  81. Conductivity studies of plasticized anhydrous PEO-KOH alkaline solid polymer electrolyte

    Article • Ionics, September 2007, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  82. Impedance studies on plasticized PMMA-LiX [X: CF3SO3−, N(CF3SO2)2−] polymer electrolytes

    Article • Materials Letters, April 2007, Elsevier

    Prof Dr Hadariah Bahron, Dr Ab Malik Marwan Bin Ali

  83. Electrochemical studies on polymer electrolytes based on poly(methyl methacrylate)-grafted natural rubber for lithium polymer battery

    Article • Ionics, November 2006, Springer Science + Business Media

    Prof Dr Hadariah Bahron, Dr Ab Malik Marwan Bin Ali

  84. The role and impact of rubber in poly(methyl methacrylate)/lithium triflate electrolyte

    Article • Journal of Power Sources, September 2006, Elsevier

    Dr Ab Malik Marwan Bin Ali

  85. Effects of plasticiser on the lithium ionic conductivity of polymer electrolyte PVC-LiCF3SO3

    Article • Ionics, September 2005, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  86. Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte

    Article • Ionics, September 2005, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  87. Electrical properties of plasticized chitosan-lithium imide with oleic acid-based polymer electrolytes for lithium rechargeable batteries

    Article • Ionics, September 2005, Springer Science + Business Media

    Dr Ab Malik Marwan Bin Ali

  88. 10.4028/0-87849-404-9.275

    Article • CrossRef Test Account

    Dr Ab Malik Marwan Bin Ali