All Stories

  1. Smart Acoustic Lining for UHBR Technologies Engine Part 1: Design of an Electroacoustic Liner and Experimental Characterization Under Flow in Rectangular Cross-Section Ducts
  2. Smart Acoustic Lining for UHBR Technologies Engine Part 2: Acoustic Treatment at the Intake of a Scaled Turbofan Nacelle
  3. Manipulating sound waves without any acoustic material
  4. PID-like active impedance control for electroacoustic resonators to design tunable single-degree-of-freedom sound absorbers
  5. In flow acoustic characterisation of a 2D active liner with local and non local strategies.
  6. Corona discharge actuator as an active sound absorber under normal and oblique incidence
  7. Using plasma physics to make sound
  8. Numerical Optimization of Liner Impedance in Acoustic Duct
  9. Absorbing sound through controllable loudspeaker nonlinearities
  10. Low frequency sound field reconstruction in a non-rectangular room using a small number of microphones
  11. Active Acoustic Resonators with Reconfigurable Resonance Frequency, Absorption, and Bandwidth
  12. Perception of Auditory Distance in Normal-Hearing and Moderate-to-Profound Hearing-Impaired Listeners
  13. Using loudspeakers to eliminate obstacles in a propagating medium
  14. Audio-visual sensory deprivation degrades visuo-tactile peri-personal space
  15. Joint Estimation of the Room Geometry and Modes with Compressed Sensing
  16. Toward wideband steerable acoustic metasurfaces with arrays of active electroacoustic resonators
  17. Multi-degree-of-freedom low-frequency electroacoustic absorbers through coupled resonators
  18. Effects of Binaural Spatialization in Wireless Microphone Systems for Hearing Aids on Normal-Hearing and Hearing-Impaired Listeners
  19. Constant pressure sound waves in non-Hermitian disordered media
  20. On the Optimisation of Multi-Degree-of-Freedom Acoustic Impedances of Low-Frequency Electroacoustic Absorbers for Room Modal Equalisation
  21. Constant amplitude sound waves in non-Hermitian metamaterials
  22. Design of Remote Quiet Zones Using Spot-Type Sound Reducers
  23. Localization of sound sources in a room with one microphone
  24. Development of leaky-wave antenna applications with acoustics metamaterials: From the acoustic dispersive prism to sound direction finding with a single microphone
  25. No need to shout: Effect of signal loudness on sibling communication in barn owls Tyto alba
  26. Design and assessment of a distributed active acoustic liner concept for application to aircraft engine noise reduction
  27. Toward the assessment of walls acoustic impedances from the analysis of first and second order reflections based on room impulse responses
  28. Generation of acoustic helical wavefronts using metasurfaces
  29. Broadband Low-Frequency Electroacoustic Absorbers Through Hybrid Sensor-/Shunt-Based Impedance Control
  30. Dynamic Range Limiting of HRTFs: Principle and Objective evaluation
  31. Acoustic energy harvesting using Electrochemical Double Layer Capacitors: Technical feasibility and performance assessment
  32. Acoustic carpet cloak based on an ultrathin metasurface
  33. Sensorless Electroacoustic Absorbers Through Synthesized Impedance Control for Damping Low-Frequency Modes in Cavities
  34. Application of the acoustic prism effect to direction finding with a single microphone.
  35. Electromagnetic inspired acoustic leaky-wave antenna
  36. Introducing the first acoustic dispersive prism
  37. Body part-centered and full body-centered peripersonal space representations
  38. On the design of unit-cells for acoustic metasurfaces
  39. Objective and Subjective Validation of an Active Control Approach to Reduce the Occlusion Effect in Hearing Aids
  40. Full body action remapping of peripersonal space: The case of walking
  41. Toward broadband electroacoustic resonators through optimized feedback control strategies
  42. Acoustic Leaky-Wave antenna
  43. Investigations on the physical factors influencing the ear canal occlusion effect caused by hearing aids
  44. Observation of Vehicle Axles Through Pass-by Noise: A Strategy of Microphone Array Design
  45. Optimization of electroacoustic resonators for semi-active room equalization in the low-frequency range
  46. An acoustic based method for jointly estimating speed and wheelbase length of two-axle road vehicles as they pass by
  47. Design of a built-in electroacoustic resonator for active noise reduction
  48. Electroacoustic metamaterials: Achieving negative acoustic properties with shunt loudspeakers
  49. Optimization of electroacoustic resonators for semi-active room equalization in the low-frequency range
  50. Pass-by noise acoustic sensing for estimating speed and wheelbase length of two-axle vehicles.
  51. Design of a built-in electroacoustic resonator for active noise reduction
  52. Electroacoustic metamaterials: achieving negative acoustic properties with shunt loudspeakers
  53. Transmission line based metamaterials for acoustic waves
  54. Electroacoustic absorbers: Bridging the gap between shunt loudspeakers and active sound absorption
  55. Obtaining Binaural Room Impulse Responses From B-Format Impulse Responses Using Frequency-Dependent Coherence Matching
  56. Acoustic transmission line metamaterial with negative/zero/positive refractive index
  57. Optimization of electroacoustic absorbers by means of designed experiments
  58. A theory of sound transmission through a clamped curved piezoelectric membrane connected to a negative capacitor
  59. Factoring end‐user expectations into the sound design process of computer keyboards
  60. Active modal control in rooms ‐ practical approach
  61. Differential microphone array for speech recognition
  62. From the electrical shunting of a loudspeaker to active impedance control
  63. Sound pressure estimation at an electroacoustic transducer's voicing face by way of all‐electrical sensing
  64. A preliminary study of an isodynamic transducer for use in active acoustic materials
  65. Development of active materials with adaptive acoustic impedance